13 December 2024 in ACS Energy Letters
The global lithium-ion battery recycling capacity needs to increase by a factor of 50 in the next decade to meet the projected adoption of electric vehicles. During this expansion of recycling capacity, it is unclear which technologies are most appropriate to reduce costs and environmental impacts. Here, we describe the current and future recycling capacity situation and summarize methods for quantifying costs and environmental impacts of battery recycling methods with a focus on cathode active materials. Second use, electrification of pyrometallurgy and hydrometallurgy, direct recycling, and electrochemical recycling methods are discussed as leading-edge methods for overcoming state of the art battery recycling challenges. The paper ends with a discussion of future issues and considerations regarding solid-state batteries and co-optimization of battery design for recycling.
1 August 2022 in Journal of the Electrochemical Society
Li-ion battery electrode electronic properties, including bulk conductivity and contact resistance, are critical parameters affecting cell performance and fast-charge capability. Contact resistance between the coating and current collector is often the largest electronic resistance in an electrode and is affected by chemical, microstructural, and interfacial variations. Direct measurements of contact resistance and bulk conductivity have proven to be challenging. In their absence, a mechanical electrode peel test is often used to compare adhesion and electrical contact resistance. However, using a micro-flexible-surface probe, contact resistance can be directly determined. This work compares contact resistance and mechanical peel strength of multiple commercial-grade HE5050 and NCM523 cathodes and graphite and silicon anodes. It was found that peel strength correlates well with contact resistance in a carefully curated data set (p < 0.05) and in some situations may be a good metric to estimate electrical properties. However, there were distinct outliers in the data set, indicating that peel strength may not accurately reflect electrical properties when there is significant variation in electrode composition. These results illustrate the value of the micro-flexible-surface probe in quantifying contact resistance and bulk conductivity to better understand how battery composition and processing steps affect microstructure and resulting cell performance.
19 August 2025 in Advanced Functional Materials
Sustainable battery production is a major challenge for the future of electrification with the rise in battery production leading to a massive increase in demand for battery cathode materials. Needed are environmentally responsible ways to recycle used cathodes into new cathodes to create a circular economy for batteries. While some battery recycling and recovery techniques for battery components are developed, they can involve costly and environmentally impactful multi‐step processes. This work demonstrates for the first time the simultaneous dissolution and electrochemical deposition of Li‐ion transition metal oxide cathodes, providing a path to directly fabricate new battery cathodes from old battery cathodes. The LiCoO 2 cathodes formed via this recycling process exhibit near‐theoretical capacities, are binder and additive‐free, and are phase pure. Technoeconomic and life cycle analyses show the simultaneous dissolution and electrochemical deposition process is less costly and environmentally harmful than traditional pyrometallurgical, hydrometallurgical, and direct recycling methods. This method has major potential impacts and advantages on the industrial scale as it creates battery materials in fewer steps at a lower cost and with a lower environmental impact than current battery recycling methods.
11 July 2025 in ECS Meeting Abstracts
Accurate thermal modeling is an invaluable tool for designing effective battery systems at cell, pack, and module levels. The need for effective modeling is only exacerbated as we push towards faster charging procedures and extreme temperature conditions for batteries. Creating a successful thermal model is dependent on experimentally derived thermal properties of the various components used to create the battery. Thermal conductivity of these components is of particular importance as it denotes a material’s ability to move heat away from high temperature regions. The liquid electrolyte in lithium-ion batteries has the lowest thermal conductivity of all battery components. There is surprisingly limited data on the thermal conductivity of solutions used to make electrolytes or on the impact of different mixtures or salt concentrations on the thermal conductivity. Our work utilizes a novel measurement tool, thermo-optic phase spectroscopy (TOPS), to determine the thermal conductivity of common battery electrolyte solvents and several binary mixtures. Our work also explores the change in thermal conductivity of these electrolytes at room and elevated temperatures. Included in this study are solvent and electrolyte solutions of dimethyl carbonate, ethylene carbonate, dimethoxyethane, and 1,3-dioxolane with LiPF6 and LiTFSI salts at temperatures from 25oC to 55oC. Results from these experiments have shown thermal conductivities of the different solutions ranging from below 0.14 W/m-K to above 0.21 W/m-K. The results of this work provide vital information for battery design and thermal modeling. By revealing the impact of solvent and lithium salt concentration on the thermal conductivity of liquid electrolytes, models can more accurately predict the thermal response of battery systems and provide insight on how to design more robust and thermally stable batteries.