29 May 2021 in Journal of the Electrochemical Society
This work uses accelerating rate calorimetry to evaluate the impact of cell chemistry, state of charge, cell capacity, and ultimately cell energy density on the total energy release and peak heating rates observed during thermal runaway of Li-ion batteries. While the traditional focus has been using calorimetry to compare different chemistries in cells of similar sizes, this work seeks to better understand how applicable small cell data is to understand the thermal runaway behavior of large cells as well as determine if thermal runaway behaviors can be more generally tied to aspects of lithium-ion cells such as total stored energy and specific energy. We have found a strong linear correlation between the total enthalpy of the thermal runaway process and the stored energy of the cell, apparently independent of cell size and state of charge. We have also shown that peak heating rates and peak temperatures reached during thermal runaway events are more closely tied to specific energy, increasing exponentially in the case of peak heating rates.
1 May 2021 in MRS Bulletin
Battery safety is a multidisciplinary field that involves addressing challenges at the individual component level, cell level, as well as the system level. These concerns are magnified when addressing large, high-energy battery systems for grid-scale, electric vehicle, and aviation applications. This article seeks to introduce common concepts in battery safety as well as common technical concerns in the safety of large rechargeable systems. Lithium-ion batteries represent the most significant technology in high-energy rechargeable batteries and a technology with well-known safety concerns. Because of this, particular attention is paid to introduce common concepts and concerns specific to these batteries. An introduction of system-level battery issues that may cause problems in larger systems is given. Finally, a brief summary of the gaps in emergent technologies is provided. As most of the effort in new technologies goes toward improving performance, there are significant gaps in understanding safety performance of these new batteries.
31 October 2022 in Journal of the Electrochemical Society
SSShriram Santhanagopalan
+2
Cooling plates in battery packs of electric vehicles play critical roles in passive thermal management systems to reduce risks of catastrophic thermal runaway. In this work, a series of numerical simulations and experiments are carried out to unveil the role of cooling plates (both between cells and a bottom plate parallel to the cell stack) on the thermal behavior of battery modules and packs under nail penetrations. First, we investigated the role of side cooling plates on the thermal runaway propagation mitigation in battery modules (1S3P) and packs (3S3P) by varying the key parameters of the side cooling plates, such as plate thicknesses, thermal contact resistances, and materials. Then, three important factors for passive thermal management systems are identified: (i) thermal mass of side cooling plates, (ii) interfacial thermal contact resistances, and (iii) the effective heat transfer coefficients at exterior surfaces. The roles of bottom cooling plates on thermal runaway propagation mitigation in 1S3P and 1S5P battery modules are numerically investigated by comparing the thermal behavior of the modules with only side cooling plates and with both side and bottom cooling plates.
2 December 2021 in IEEE Electrification Magazine
Energy storage systems are becoming widely deployed throughout the electricity infrastructure. Large-scale integration of energy storage systems will become much more widespread as we begin to integrate larger amounts of renewables. Furthermore, electrification of the transportation sector will demand fast charging infrastructure and energy storage to handle new loads on distribution systems. However, energy storage systems, especially battery energy storage systems (BESSs), present a range of hazards that make engineering safety of large-scale systems a challenge. This article explores engineering safety of grid energy storage systems from the perspective of an asset owner and system operator. We review the hazards of common lithium-ion and aqueous battery system designs along with the state-of-the-art hazard mitigation methods. We also summarize the development of codes and standards to ensure safety and discuss best practices for emergency preparedness.
20 May 2022 in Experiments in Fluids