16 June 2014 in The Journal of the Acoustical Society of America
This letter proposes an experimental method to estimate the absorption coefficient of sound absorbing materials under a synthesized diffuse acoustic field in free-field conditions. Comparisons are made between experiments conducted with this approach, the standard reverberant room method, and numerical simulations using the transfer matrix method. With a simple experimental setup and smaller samples than those required by standards, the results obtained with the proposed approach do not exhibit non-physical trends of the reverberant room method and provide absorption coefficients in good agreement with those obtained by simulations for a laterally infinite material.
1 February 2017 in The Journal of the Acoustical Society of America
Snowmobile manufacturers invest important efforts to reduce the noise emission of their products. The noise sources of snowmobiles are multiple and closely spaced, leading to difficult source separation in practice. In this study, source imaging results for snowmobile pass-by noise are discussed. The experiments involve a 193-microphone Underbrink array, with synchronization of acoustic with video data provided by a high-speed camera. Both conventional beamforming and Clean-SC deconvolution are implemented to provide noise source maps of the snowmobile. The results clearly reveal noise emission from the engine, exhaust, and track depending on the frequency range considered.
1 December 2020 in Journal of Sound and Vibration
10 June 2023 in Mechanical Systems and Signal Processing
1 May 2020 in The Journal of the Acoustical Society of America
This paper proposes two distinct methods for estimating the surface impedance Zs of acoustic materials using a spherical microphone array. The first method is based on the spherical ambisonic representation of sound fields to estimate the normal particle velocity and the sound pressure at the surface of the material. The second method uses an optimization process, where the measured sound pressure field is constrained to match a theoretical model. These two methods are compared to two existing methods: the equivalent source approach and the two-microphone measurement technique. The results show a clear advantage of the microphone array methods compared to the classical two-microphone method. The measurements show an accurate reconstruction of surface impedance and absorption coefficient between 120 and 5000 Hz for various sound incidences but also show edge effect perturbations due to the limited size of the tested samples. In addition, two criteria are proposed, one estimating the noise floor level allowing the optimization of the measurement results, the other evaluating the area of accurate impedance reconstruction on the surface of the material.
1 July 2016 in The Journal of the Acoustical Society of America
Microphone array techniques are an efficient tool to detect acoustic source positions. The delay and sum beamforming is the standard method. In the time domain, the generalized cross-correlation can be used to compute the noise source map. This technique is based on the arithmetic mean of the spatial likelihood functions. In this study, the classical arithmetic mean is replaced by the more standard generalized mean. The noise source maps provide by the arithmetic, geometric and harmonic means are compared in the case of numerical and experimental data obtained in a reverberant room. The geometric and harmonic means provide the best noise source maps with no side lobes and a better source level estimation.