Wei Hong

Wei Hong

Auto-generated profile, based on publicly available information

Wei Hong

School of New Energy and Intelligent Connected Vehicle, Anhui University of Science and Technology, Hefei, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2021 in Superconductor Science and Technology
Verified
Journal Article
Closed access
GLGengyao Li
Gengyao Li
Li ChaoLi Chao
Li Chao
YXYing Xin
Ying Xin
WHWei Hong
Wei Hong
WLWenxin Li
Wenxin Li
BLBin Li
Bin Li
Lots of high-temperature superconducting (HTS) devices which require current leads, slip rings or brushes have to face the challenges such as large heat load and complex structure. Recently, an HTS energy converter has been proposed, which can not only induce but also exploit persistent current in a closed HTS ring, realizing the conversion of mechanical energy—electromagnetic energy—mechanical energy wirelessly. In this work, a dynamic modelling method based on the H-formulation and moving mesh has been proposed to accurately simulate the electromagnetic performance of the HTS energy converter. The proposed modelling method can depict the induced current density inside the superconductor and magnetic field distribution, serving as a powerful tool to analyze the complex working principle of the HTS energy converter. The validity of the model has been verified by experimental results. Besides, effects of different parameters of the energy converter have been investigated in detail by our proposed model, to provide further insight into the design and applications of the device.

18 November 2019 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YWYuyan Wen
Yuyan Wen
YXYing Xin
Ying Xin
WHWei Hong
Wei Hong
CZChaoqun Zhao
Chaoqun Zhao
An improved force measurement system was developed for investigating High Temperature Superconducting (HTS) maglev properties. The measurement system consists of assorted sensors, a 3D sliding platform, a mechanical drive with automatic control software and a data collecting and processing software. This system features high precision, instant measuring at the movement of the targeted HTS bulk, synchronous measurement of levitation force and guidance force, and the magnetic field. This system can be used for studying the interaction behavior between an HTS bulk and a Permanent Magnet Guideway (PMG) or an Electromagnetic Guideway (EMG) of different shapes and sizes. It can realize arbitrary three-dimensional complex curvilinear motions. This system was built with a flexible platform and high precision force and distance sensors. As a result, the magnetic levitation characteristics of an HTS bulk above a magnet guideway can be precisely investigated with this system. In general, the above functions all have been verified by experiments.

12 February 2020 in Superconductor Science and Technology
Verified
Journal Article
Closed access
PDF file
YWYuyan Wen
Yuyan Wen
YXYing Xin
Ying Xin
WHWei Hong
Wei Hong
CZChaoqun Zhao
Chaoqun Zhao
WLWenxin Li
Wenxin Li
In this study, we investigated the magnetic levitation characteristics of a high-temperature superconducting (HTS) bulk with both permanent magnet guideway (PMG) and electromagnet guideway (EMG). Trying to have the magnetic fields of the two kinds of guideways with a similar structure, then the central magnetic flux density B z and unit magnetomotive F u were selected as the evaluation indexes respectively for the comparative study. Different magnetic field characteristics on magnetic levitation performance were studied, such as the gradient of magnetic flux density and magnetic flux density component in different directions. Several experiments were carried out at different magnetic field conditions by changing the exciting current of EMG or replacing different PMG specimens. The experiments were conducted with a high-precision force-measuring platform. The experimental results show that the EMG has several different characteristics as compared with PMG. As a result, the magnetic levitation performance is related to the gradient of magnetic flux density as well as the directional magnetic flux density components. The structure of the magnetic field also has great influence on the performance. The results will be helpful for further study of the properties of HTS maglev and provide guidance for the subsequent EMG design.

7 February 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
BLBin Li
Bin Li
CWChangqi Wang
Changqi Wang
WHWei Hong
Wei Hong
SYSong Yang
Song Yang
YXYing Xin
Ying Xin
DC fault current limiter is an important device for the dc system, because the action speed of the existing selective protection cannot match the dc fault developing speed. Due to its excellent capacity on limiting dc fault rising speed, the analyses of dc inductive type superconducting fault current limiter (I-SFCL) are attracting more attention. In this paper, a modelling method for dc I-SFCL is proposed to describe its nonlinear characteristic of in-ductance. Firstly, the structure and working principle of the dc I-SFCL is briefly introduced, and the magnetic equivalent circuit is established according to the magnetic field distribution. Then, the relationship between dc tran-sient current and the current-limiting inductance of dc I-SFCL is discussed. By analyzing the equivalent magnetic circuit, a mathematical I-SFCL model is proposed in Matlab based on the actual geometric and electrical parameters. Finally, under the same dc test platform, the magnetic flux density, the voltage and the current of dc I-SFCL in Matlab model are compared with that in finite element method (FEM) model. Simulation results verifies the validity and the correctness of the model.

20 April 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
WHWei Hong
Wei Hong
YXYing Xin
Ying Xin
CWChangqi Wang
Changqi Wang
YWYuyan Wen
Yuyan Wen
CZChaoqun Zhao
Chaoqun Zhao
WLWenxin Li
Wenxin Li
High Temperature Superconducting (HTS) maglev technology has been developed for more than two decades. Permanent Magnet Guideway (PMG) has been always used for the rail of a HTS maglev system so far. For the long distance HTS maglev system, PMG has some disadvantages in practice. In last few years, we carried out studies to investigate the feasibility of using Electromagnetic Guideway (EMG) for a HTS maglev system. EMG is not only more reliable, but also more controllable and flexible. We have proposed an E-shaped electromagnet that could be the basic element for building an EMG with good controllability and flexibility. The geometrical and circuitry design of the E-shaped electromagnet were first suggested through theoretical magnetic circuit analysis. The design then was examined and optimized by computer simulation. Afterward, we made a prototype and conducted several levitation tests to verify the design with a high precision measuring platform. In this paper, the performances of the prototype with different exciting modes and different dimensions are reported and discussed.

13 November 2019 in Superconductor Science and Technology
Verified
Journal Article
Closed access
PDF file
TYTianhui Yang
Tianhui Yang
HJHui Jin
Hui Jin
WLWenxin Li
Wenxin Li
WHWei Hong
Wei Hong
BTBo Tian
Bo Tian
YXYing Xin
Ying Xin
High Temperature Superconducting (HTS) cables have numerous advantages in comparison with conventional power cables, such as high power density and low power losses, so they have great potential in enhancing the transmission capacity and improving the quality of power grids. In this work, we studied various cases to evaluate the feasibility of replacing conventional cables with HTS cables in metropolitan distribution networks. These cases represent three principal strategies. The first, HTS cables are applied at the same or lower voltage levels with the same transmission capacity, named as "equal capacity replacement". The second, considering the increasing power demands we demonstrate how HTS cables can benefit the power grids with expanded capacity (expanded capacity replacement). The third, we consider the case of unequal routes from the perspective of saving land resources (unequal routing replacement). In this paper, we introduce the methods and results of this study and give some preliminary conclusive remarks.