Schematic of the galvanic corrosion evolution on η-phase (MgZn2), β-phase (Al3Mg2), Q-phase (Al4Cu2Mg8Si7), and π-phase (Al8Mg3FeSi6) coupled to aluminum at different pH values using the SVET current density map.
5 June 2024 in Advances in Colloid and Interface Science
The durability and functionality of many metallic structures are seriously threatened by corrosion, which makes the development of anticorrosive coatings imperative. This state-of-the-art survey explores the recent developments in the field of anticorrosive organic coatings modulated by innovations involving nano/microcontainers with porous matrices. The integration of these cutting-edge delivery systems seeks to improve the protective properties of coatings by enabling controlled release, extended durability, targeted application of corrosion inhibitors, and can be co-constructed to achieve defect filling by polymeric materials. The major highlight of this review is an in-depth analysis of the functionalities provided by porous nano/microcontainers in the active protection and self-healing of anticorrosive coatings, including their performance evaluation. In one case, after 20 days of immersion in 0.1 M NaCl, a scratched coating containing mesoporous silica nanoparticles loaded with an inhibitor benzotriazole and shelled with polydopamine (MSNs-BTA@PDA) exhibited coating restoration indicated by a sustained corrosion resistance rise over an extended period monitored by impedance values at 0.01 Hz frequency, rising from 8.3 × 104 to 7.0 × 105 Ω cm2, a trend assigned to active protection by the release of inhibitors and self-healing capabilities. Additionally, some functions related to anti-fouling and heat preservation by nano/microcontainers are highlighted. Based on the literature survey, some desirable properties, current challenges, and prospects of anticorrosive coatings doped with nano/microcontainers have been summarized. The knowledge gained from this survey will shape future research directions and applications in a variety of industrial areas, in addition to advancing smart corrosion prevention technology.
The synergistic effect of crevice corrosion and galvanic coupling on the degradation of 304 stainless steel fasteners exposed to a chloride environment was investigated using electrochemical and surface analysis techniques. Results obtained revealed that the crevice region of the fastener showed lower corrosion resistance due to decreased surface passivation induced by the crevice geometry and low oxygen conditions, while the exposed region with a higher oxygen supply exhibited improved corrosion resistance. Coupling of the exposed and crevice regions of the fastener demonstrated accelerated corrosion attributable to galvanic effect. The driving force for the galvanic effect on the fastener was linked to three (3) key factors: (I) the potential difference established between the different regions on the fastener surface due to uneven oxygen distribution, (II) the difference in the solution environment, and (III) the difference in surface properties (active-passive surface). Morphological studies showed localised corrosion occurring mainly in the crevice.