This paper proposes a strategy to consider the dielectric effects in the thin-wire integro-differential formulation and applies it to analyzing microstrip metasurfaces that support magnetic resonances. These structures comprise a periodic arrangement of subwavelength unit cells; therefore, the thin-wire approximation can be applied to analyze them. However, the substrate is usually disregarded. This work achieves more accurate results with a homogeneous equivalent medium approximation considering the dielectric properties. Moreover, an experimental methodology is presented to validate this implementation for each device as well as for the complete system. The proposed formulation is numerically solved with the Method of Moments, and the results show close agreement with experimental data. Besides, it leads to a significant reduction in the computation time compared to a full-wave analysis, which makes this approach also compelling for designing inductive wireless power transfer systems and magnetic resonators.
21 December 2022 in IEEE Transactions on Magnetics
This paper proposes a circuit model to calculate the current along printed coils used in Resonant Wireless Power Transfer. It considers a system composed of a metamaterial and two coplanar coils, transmitter and receiver, respectively. First, a circuit model for the system is presented. Then, an analytical model is proposed to calculate the self-inductance of printed inductors, their characteristic resistance, and the mutual inductance between coils. The proposed formulation for calculating the mutual inductance between inductors is based on Neumann’s formula. The practical results validate the model precision, obtaining a maximum deviation of approximately 8%, 3%, and 3%, respectively. Due to the generality of this approach, it can also be applied to more complex structures such as metasurfaces. The proposed 3-D models proved to be ideal for modeling the printed inductor. Furthermore, this model proved to be computationally more efficient for analyzing large systems when compared to commercial full-wave simulation software, with a reduction in the computational time larger than three orders of magnitude.