Joon-Sung Yang

Joon-Sung Yang

Auto-generated profile, based on publicly available information

Joon-Sung Yang

Yonsei University, Seoul, Seoul, Republic of Korea

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 July 2020 in IEEE Transactions on Computers
Verified
Journal Article
Closed access
TKTaehyun Kwon
Taehyun Kwon
MIMuhammad Imran
Muhammad Imran
JYJoon-Sung Yang
Joon-Sung Yang
Next-generation memories have been actively researched to replace the existing memories like DRAM and flash in deep sub-micron process technology. Among the next-generation memories, Phase Change Memory (PCM) is seen as a good choice for future memory systems, given its good read performance, process compatibility and scaling potential. To enhance the storage density, multi-level cell (MLC) operation is seemed promising which can store more than one bit in each PCM cell. The use of heavyweight ECC comes at cost of significant degradations in storage density, performance and energy efficiency. In this paper, we propose a heterogeneous PCM architecture which uses both multi-level cell and single-level cell (SLC) together for a single word line. With highly-reliable SLC cells, the overall array reliability is enhanced. To improve the reliability further, a dynamic self-encoding/decoding scheme is performed before the data is written to the PCM cells. Since the proposed encoding/decoding scheme does not require any additional stages or storages for encoding and decoding, the overhead is negligible. The experimental results show that the reliability is improved approximately 10 $6$ times compared to conventional 4LC method. The performance and energy efficiency improvements are 21.5% and 30.3%, respectively.

20 February 2020 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
IUInayat Ullah
Inayat Ullah
JYJoon-Sung Yang
Joon-Sung Yang
JCJaeyong Chung
Jaeyong Chung
Static random access memory (SRAM)-based ternary content-addressable memory (TCAM) on field-programmable gate arrays (FPGAs) is used for packet classification in software-defined networking (SDN) and OpenFlow applications. SRAMs implementing TCAM contents constitute the major part of a TCAM design on FPGAs, which are vulnerable to soft errors. The protection of SRAM-based TCAMs against soft errors is challenging without compromising critical path delay and maintaining a high search performance. This brief presents a low-cost and low-response-time technique for the protection of SRAM-based TCAMs. This technique uses simple, single-bit parity for fault detection which has a minimal critical path overhead. This technique exploits the binary-encoded TCAM table maintained in SRAM-based TCAMs for update purposes to implement a low-response-time error-correction mechanism at low cost. The error-correction process is carried out in the background, allowing lookup operations to be performed simultaneously, thus maintaining a high search performance. The proposed technique provides protection against soft errors with a response time of 293 ns, whereas maintaining a search rate of 222 million searches per second on a 1024 x 40 size TCAM on Artix-7 FPGA.

16 August 2012 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Verified
Journal Article
Open access
JYJoon-Sung Yang
Joon-Sung Yang
NTNur A. Touba
Nur A. Touba
In this paper, an X-tolerant multiple-input signature register (MISR) compaction methodology that compacts output responses containing unknown X values is described. Each bit of the MISR signature is expressed as a linear combination in terms of Xs by symbolic simulation. Linearly dependent combinations of the signature bits are identified with Gaussian elimination and XORed to remove X values and yield deterministic values. Two X-canceling MISR architectures are proposed and analyzed with industrial designs. This paper also shows the correlation between the estimated result based on idealized modeling and the actual data for real circuits for error coverage, hardware overhead, and other metrics. Experimental results indicate that high error coverage can be achieved with X-canceling MISR configurations and it highly correlates with actual results.

25 April 2017 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Verified
Journal Article
Closed access
TLTaehee Lee
Taehee Lee
DPDavid Z. Pan
David Z. Pan
JYJoon-Sung Yang
Joon-Sung Yang
Clock network should be optimized to reduce clock power dissipation. The power efficient clock network can be constructed by multibit flip-flop generation and gated clock tree aware flip-flop clumping to pull flip-flops close to the same integrated clock gating cell. It is capable of providing an attractive solution to reduce clock power. This paper considers multicorner and multimode timing constraints for the two combined approach. This proposed method is applied to five industrial digital intellectual property blocks of state-of-the-art mobile system-on-a-chip fabricated in 14-nm CMOS process. Experimental results show that MBFF generation algorithm achieves 22% clock power reduction. Applying a gated clock tree aware flip-flop clumping on top of the MBFF generation further reduces the power to around 32%.

26 March 2021 in IEEE Transactions on Computers
Verified
Journal Article
Closed access
MIMuhammad Imran
Muhammad Imran
TKTaehyun Kwon
Taehyun Kwon
NTNur A. Touba
Nur A. Touba
JYJoon-Sung Yang
Joon-Sung Yang
Phase Change Memory (PCM), with its better scaling potential compared to DRAM, is seen as a promising candidate to replace or complement DRAM. The heat generated from a RESET programming pulse to a PCM cell can disturb the neighboring cells which are not being programmed. Write disturbance (WD) poses a critical reliability challenge in high-density PCM memory with scaling below 20nm process technology node. Increasing the intra-cell space can eliminate the WD, however, it reduces the storage density which counteracts the benefits of scalability in PCM. At architectural level, a verify and correct (VnC) technique can be used to address this problem. However, this leads to an increased number of write operations, thus degrading performance, energy efficiency and memory lifetime. Due to its dependence on the type of programming operation and the state of the neighboring cell, WD is a data-dependent problem. Exploiting this property, encoding techniques have been proposed to reduce the frequency of WD-vulnerable data patterns. These techniques, however, do not eliminate the WD in an array and ultimately rely on the VnC method to ensure reliable memory operation. This article introduces a novel architecture, based on encoding and multi-level programming characteristics of PCM, to eliminate the intra-array WD in PCM. By eliminating WD and hence the need for a VnC operation, the proposed architecture improves performance, energy efficiency and memory lifetime. Our evaluation of the proposed architecture shows an average reduction of 57 percent in the number of writes (to service one write request) over the existing state-of-the-art intra-array WD-mitigation technique. Depending on the PCM write bandwidth, the proposed architecture can reduce the write service time by up to 27 percent, on average, compared to the existing best-performing technique. This leads to an average improvement of 15 percent in IPC. Additionally, by eliminating the overhead of a verify operation, the write energy efficiency is also improved by 8 percent over the previous art. Finally, with an average reduction of 26 percent in bit flips, the proposed method also improves the memory lifetime. The proposed method is also proven to be effective when considering WD both within the word-lines and across the bit-lines.

25 March 2021 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Verified
Journal Article
Closed access
MIMuhammad Imran
Muhammad Imran
TKTaehyun Kwon
Taehyun Kwon
JYJoon-Sung Yang
Joon-Sung Yang
Phase change memory (PCM) is an emerging, resistance-based, nonvolatile memory. With a promising scaling potential, PCM can replace the existing charge-based memory technologies. A highly scaled PCM is prone to write disturbance (WD) because of a high-current RESET programming pulse. Exploiting the data-dependent nature of WD, encoding techniques have been proposed to reduce the frequency of WD-vulnerable data patterns. These techniques work along with a verify and correct (VnC) method to ensure memory reliability. However, the effectiveness of these techniques varies depending on the data patterns. Unlike the conventional methods, this article introduces a WD-aware programming technique to mitigate WD in PCM. The proposed method encodes the data based on the number of WD-vulnerable cells and the bit flips. By reducing the number of WD-vulnerable cells as well as the bit flips, the proposed method is more effective than the existing encoding techniques, in mitigating WD as well as improving the memory lifetime. Evaluation using various realistic workloads shows that the proposed method can reduce the average word-line WD errors by 62%, compared to the existing state of the art. With a reduced number of WD errors, the frequency of a VnC operation is also reduced. This leads to a reduction of 44% in the number of extra writes and 20% in the average write time. With reduction in the number of writes and the write time, instructions-per-cycle is improved by 9% and the write energy by 11% over the existing art. By reducing the number of bit flips compared to the previous state of the art, the proposed method improves the PCM memory lifetime by 13% to 33%, considering the asymmetry of SET and RESET operations in impacting the cell endurance.