Large-scale millimeter-wave (mm-Wave) integrated phased array is the key technology to enable broadband 5G and satellite communications. This paper details the design considerations, challenges and trade-offs of mm-Wave integrated phased arrays based on bulk CMOS and multi-layer hybrid PCB technologies. Both technologies attain high yield and low cost for mass production. Important beamforming building blocks are addressed and compared in detail. Demonstrators of integrated phased arrays are presented from circuit to board levels. The 1024- and 4096-element integrated phased arrays achieve the EIRP of 72.5 and 84.0 dBm respectively. Finally, relevant phased-array transceivers and antennas from the recent literature are discussed.
15 February 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
This article presents a Ku-band power amplifier with a series-shunt LC notch filter in 65-nm CMOS. The notch filter is integrated into the inter-stage matching network to attenuate the receiver-band noise, thereby reducing transmitter-to-receiver interference. A comprehensive analysis of the series and the shunt notch filters, as well as the position to apply the notch filter is discussed. Besides, a systematic method of optimizing passive devices in the notch filter is proposed to further improve network Q and minimize the influence on the power amplifier. Fabricated in 65-nm CMOS technology, the power amplifier prototype delivers a measured gain of 21.9 dB with 3-dB bandwidth from 13.7 GHz to 16.7 GHz at the nominal state. At 14.2 GHz, it can offer a saturated output power of 14.5 dBm with peak power added efficiency of 24.1%. The notch frequency is adjustable from 10.3 to 11.9 GHz to offer the best attenuation at the receiver band. From 10 to 12 GHz, a maximal attenuation of 30 dB is achieved. The design occupies a core area of 0.35×0.85 mm 2 .
30 August 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers