The epitaxial growth of Mg3N2 thin films by molecular beam epitaxy has been recently achieved. This work presents the structural properties of the films, including grain sizes and lattice rotations, as assessed by x-ray diffraction and transmission electron microscopy. The films’ microstructure consists of well-aligned columnar grains 10 nm in diameter that nucleate at the film/substrate interface and display a significant column twist, in the order of 2.5°. As growth proceeds, tilted and twisted mosaic blocks overgrow these columns, as observed in many other epitaxial semiconductors. Yet, the rocking curves on symmetric reflections display extremely narrow peaks (∼50 arc sec), revealing a long-range spatial correlation between structural defects that should not be mistakenly considered a proof of high crystalline quality.
We study the molecular beam epitaxy of rock-salt ScN on the wurtzite GaN(11̅00) surface. To this end, ScN is grown on freestanding GaN(11̅00) substrates and self-assembled GaN nanowires exhibiting (11̅00) sidewalls. On both substrates, ScN crystallizes twin-free thanks to a specific epitaxial relationship, namely ScN(110)[001]∥GaN(11̅00)[0001], providing a congruent, low-symmetry interface. The 13.1% uniaxial lattice mismatch occurring in this orientation mostly relaxes within the first few monolayers of growth by forming a near-coincidence site lattice, where 7 GaN planes coincide with 8 ScN planes, leaving the ScN surface nearly free of extended defects. Overgrowth of the ScN with GaN leads to a kinetic stabilization of the zinc blende phase, that rapidly develops wurtzite inclusions nucleating on {111} nanofacets, commonly observed during zinc blende GaN growth. Our ScN/GaN(11̅00) platform opens a new route for the epitaxy of twin-free metal-semiconductor heterostructures including closely lattice-matched GaN, ScN, HfN, and ZrN compounds.
Single-crystalline thin films are grown on MgO (100) substrates with plasma-assisted molecular beam epitaxy. To prevent the oxidation of the films and allow further physical characterization, a polycrystalline MgO cap is deposited in situ. The growth orientation of the films can be tuned from (100) to (111) by changing the growth conditions, and the associated epitaxial relationships have been determined by means of x-ray diffraction. The lattice constant of films has been monitored as a function of temperature from 300 to 900 K, determining thereby the linear thermal expansion coefficient. Transmission measurements indicate an optical bandgap of crystalline around 2.9 eV at room temperature, consistent with diffuse reflectance measurements on micrometric particles. These results demonstrate the possibility of exploiting as a new crystalline semiconductor in the blue-violet range.
We study the molecular beam epitaxy of AlN nanowires between 950 °C and 1215 °C, well above the usual growth temperatures, to identify optimal growth conditions. The nanowires are grown by self-assembly on TiN(111) films sputtered onto Al2O3. Above 1100 °C, the TiN film is seen to undergo grain growth and its surface exhibits {111} facets where AlN nucleation preferentially occurs. Modeling of the nanowire elongation rate measured at different temperatures shows that the Al adatom diffusion length maximizes at 1150 °C, which appears to be the optimum growth temperature. However, analysis of the nanowire luminescence shows a steep increase in the deep-level signal already above 1050 °C, associated with O incorporation from the Al2O3 substrate. Comparison with AlN nanowires grown on Si, MgO and SiC substrates suggests that heavy doping of Si and O by interdiffusion from the TiN/substrate interface increases the nanowire internal quantum efficiency, presumably due to the formation of a SiNx or AlOx passivation shell. The outdiffusion of Si and O would also cause the formation of the inversion domains observed in the nanowires. It follows that for optoelectronic and piezoelectric applications, optimal AlN nanowire ensembles should be prepared at 1150 °C on TiN/SiC substrates and will require an ex situ surface passivation.
Single-crystalline Zn3N2 thin films have been grown on MgO (100) and YSZ (100) substrates by plasma-assisted molecular beam epitaxy. Depending on growth conditions, the film orientation can be tuned from (100) to (111). For each orientation, x-ray diffraction and reflection high-energy electron diffraction are used to determine the epitaxial relationships and to quantify the structural quality. Using high-temperature x-ray diffraction, the Zn3N2 linear thermal expansion coefficient is measured with an average of (1.5 ± 0.1) × 10−5 K−1 in the range of 300–700 K. The Zn3N2 films are found to be systematically n-type and degenerate, with carrier concentrations of 1019–1021 cm−3 and electron mobilities ranging from 4 to 388 cm2 V−1 s−1. Low-temperature Hall effect measurements show that ionized impurity scattering is the main mechanism limiting the mobility. The large carrier densities lead to measured optical bandgaps in the range of 1.05–1.37 eV due to Moss–Burstein band filling, with an extrapolated value of 0.99 eV for actual bandgap energy.