13 January 2023 in IEEE Robotics and Automation Letters
In this study, an NMPC-based planning approach is proposed for Hybrid Terrestrial and Aerial Quadrotors (HyTAQs) to achieve safe and efficient hybrid locomotion in unknown environments. The approach ensures bimodal dynamic feasibility and fully exploits the high efficiency and accessibility of HyTAQs. Equipped with the complementarity constraints for hybrid dynamics, the unified NMPC enables simultaneous optimization of the full-state trajectory and the inherent locomotion mode without the computational burden of mixed-integer programming. Also, the uncertainty bounds are evaluated along the nominal trajectory in a receding horizon manner and incorporated within the geometry constraints for the safety and robustness. Further, the bimodal energy efficiency is fully considered by the topology-guided path searching, achieving more efficient mode selection. Then, a compact unified terrestrial-aerial planner is implemented on the HyTAQ and validated through various comparisons and navigation tests. Experimental results verify the high efficiency and robustness of the proposed approach.
4 August 2023 in IEEE Transactions on Automatic Control
This study is concerned with the bumpless transfer control (BTC) for discrete-time Markov jump linear systems (MJLSs) subject to constraints on states and inputs. A new approach called bumpless transfer model predictive control (BT-MPC) is proposed, which simultaneously optimizes the stabilization performance and bumpless transfer performance in a receding horizon manner. By a scenario-based control law, the fixed-duration transition progress is generalized to the mutable-duration one, so that the BTC scheme can be applied to MJLSs. Compared with existing BTC approaches, BT-MPC avoids the requirement of pre-designed controller gains or gain variations, thereby reducing the conservatism and simplifying the parameter tuning. The recursive feasibility of BT-MPC and the mean square stability of the underlying systems are theoretically guaranteed, and a simulation example is provided to validate the developed results.
29 June 2022 in IEEE Transactions on Fuzzy Systems
This paper is concerned with a class of discrete-time hybrid fuzzy systems subject to semi-Markov switching, in which the sojourn time of each mode is with upper and lower bounds. A practical scenario of transitional asynchrony is taken into account for the first time, where the switchings of controllers to be designed lag behind the ones of the controlled plant, and the lags depend on the transition between adjacent modes. By means of the semi-Markov kernel approach, numerically testable stability criteria are obtained, based on which existence conditions of the anticipated stabilizing controller capable of overcoming the transitional asynchrony are derived. Compared with the previous studies assuming the mode-independent or mode-dependent lags, the derived results are less conservative. Two illustrative examples including a class of bicopters are given to demonstrate the effectiveness and potential of the designed anti-transitional-asynchrony controllers.
20 May 2024 in IEEE Transactions on Automation Science and Engineering
This paper addresses the problem of the model predictive control (MPC) for a class of T–S fuzzy Markovian jump systems with bounded inputs and states. Two scenarios are considered, which are often overlooked in existing literature but common in practice: ( i ) asynchronous switching between the observed mode and the actual mode, and ( ii ) the excessive bump of system states. By virtue of the emission probability, the underlying systems are modeled as hidden Markovian jump systems to describe the asynchrony phenomenon. The time-varying emission probabilities are transformed into the ones in a more tractable form. Moreover, the bumpless transfer MPC (BT-MPC) is introduced to tackle the state bump phenomenon. An asynchronous fuzzy controller is obtained by the receding-horizon optimization, while ensuring recursive feasibility and stochastic stability. Besides, by a saturated state feedback scheme, the control law exploits the full control range with less conservatism compared with the case of directly dealing with control constraints. Two simulation examples are provided to demonstrate the effectiveness and advantages of the proposed control approach. Note to Practitioners —As a special hybrid system, Markovian jump systems can effectively describe the randomness of multi-modal systems. However, both the asynchrony phenomenon and hard constraints in the actual process reduce the range of existing control strategies. In addition, bumpless transfer performance is significant in many practical engineering systems. In this paper, a novel methodology is proposed to design bumpless transfer control for the fuzzy hidden Markovian jump system with time-varying emission probabilities. The proposed approach can handle both multiple control objectives and system constraints under the framework of BT-MPC. The proposed theoretical result is of a convex optimization characterization, which can be implemented algorithmically by means of the advanced and proven convex optimization toolbox. Finally, both a numerical example and a practical example of a robot arm are presented to demonstrate the effectiveness and great application prospect of the proposed approach.
12 June 2024 in IEEE/CAA Journal of Automatica Sinica
This paper revisits the problem of bumpless transfer control (BTC) for discrete-time nondeterministic switched linear systems. The general case of asynchronous switching is considered for the first time in the field of BTC for switched systems. A new approach called interpolated bumpless transfer control (IBTC) is proposed, where the bumpless transfer controllers are formulated with the combination of the two adjacent mode-dependent controller gains, and are interpolated for finite steps once the switching is detected. In contrast with the existing approaches, IBTC does not necessarily run through the full interval of subsystems, as well as possesses the time-varying controller gains (with more flexibility and less conservatism) achieved from a control synthesis allowing for the stability and other performance of the whole switched system. Sufficient conditions ensuring stability and $H_{\infty}$ performance of the underlying system by IBTC are developed, and numerical examples verify the theoretical findings.
4 January 2024 in IEEE Robotics and Automation Letters
This letter concentrates on the development of Chat-PM, a class of composite hybrid aerial/terrestrial manipulator, in concern with composite configuration design, dynamics modeling, motion control and force estimation. Compared with existing aerial or terrestrial mobile manipulators, Chat-PM demonstrates advantages in terms of reachability, energy efficiency and manipulation precision. To achieve precise manipulation in terrestrial mode, the dynamics is analyzed with consideration of surface contact, based on which a cascaded controller is designed with compensation for the interference force and torque from the arm. Benefiting from the kinematic constraints caused by the surface contact, the position deviation and the vehicle vibration are effectively decreased, resulting in higher control precision of the end gripper. For manipulation on surfaces with unknown inclination angles, the moving horizon estimation (MHE) is exploited to obtain the precise estimations of force and inclination angle, which are used in the control loop to compensate for the effect of the unknown surface. Real-world experiments are performed to evaluate the superiority of the developed manipulator and the proposed controllers.