20 May 2024 in IEEE Transactions on Automation Science and Engineering
This paper addresses the problem of the model predictive control (MPC) for a class of T–S fuzzy Markovian jump systems with bounded inputs and states. Two scenarios are considered, which are often overlooked in existing literature but common in practice: ( i ) asynchronous switching between the observed mode and the actual mode, and ( ii ) the excessive bump of system states. By virtue of the emission probability, the underlying systems are modeled as hidden Markovian jump systems to describe the asynchrony phenomenon. The time-varying emission probabilities are transformed into the ones in a more tractable form. Moreover, the bumpless transfer MPC (BT-MPC) is introduced to tackle the state bump phenomenon. An asynchronous fuzzy controller is obtained by the receding-horizon optimization, while ensuring recursive feasibility and stochastic stability. Besides, by a saturated state feedback scheme, the control law exploits the full control range with less conservatism compared with the case of directly dealing with control constraints. Two simulation examples are provided to demonstrate the effectiveness and advantages of the proposed control approach. Note to Practitioners —As a special hybrid system, Markovian jump systems can effectively describe the randomness of multi-modal systems. However, both the asynchrony phenomenon and hard constraints in the actual process reduce the range of existing control strategies. In addition, bumpless transfer performance is significant in many practical engineering systems. In this paper, a novel methodology is proposed to design bumpless transfer control for the fuzzy hidden Markovian jump system with time-varying emission probabilities. The proposed approach can handle both multiple control objectives and system constraints under the framework of BT-MPC. The proposed theoretical result is of a convex optimization characterization, which can be implemented algorithmically by means of the advanced and proven convex optimization toolbox. Finally, both a numerical example and a practical example of a robot arm are presented to demonstrate the effectiveness and great application prospect of the proposed approach.
17 October 2025 in IEEE Transactions on Fuzzy Systems
This paper studies the issue of switched data driven model predictive control (MPC) for a class of hybrid nonlinear systems with modal dwell time (MDT) restriction, where each subsystem is approximated by a T-S fuzzy system with bounded uncertainties. The unknown system matrices are characterized by a quadratic-matrix-inequality representation using the input-state-membership data. On this basis, a numerically tractable semi-definite programming (SDP) problem is formulated to design fuzzy-dependent feedback control law in a receding horizon manner for each switched mode, resulting in the optimization of worst-case infinite-horizon performance cost. Utilizing a set of feasible solutions of the constructed SDP problem, a feasible region and the corresponding approximated reachable set are deduced for each subsystem, based on which an algorithm is proposed to determine an admissible MDT ensuring the persistent feasibility of the switched data-driven MPC and the robust stability of the closed-loop system. The validity and potential of the theoretical results are illustrated through numerical applications to a single-link robot arm and a class of tail-sitter vertical take-off and landing unmanned air vehicles.
30 July 2024 in Optimal Control Applications and Methods
25 March 2026 in IEEE Transactions on Automatic Control
This paper is concerned with the design of online data-driven model predictive control (MPC) for switched linear systems with online-generated subsystems and unknowns witching signals. The online input-state data are used to detect switching instants, and update the MPC law directly to match the new subsystem bypassing identifying its model. Once a switching is detected, a fast-to slow excitation scheme will be executed until a suitable MPC law is attainable. Specifically, the fast-sampling excitation is applied for the stabilizing controller design, thereby shortening the inevitable phase of data deficiency. This is followed by a slow-sampling stage to collect sufficient data for updating MPC law. Compared with existing online ex citation strategies, the proposed method avoids excessive growth of state trajectories and degrades the risk of constraints violation. Based on set-theory-based techniques, it is revealed that the proposed online data-driven MPC approach theoretically ensures persistent feasibility and stability, provided that the switching is sufficiently slow. Illustrative examples including an aerospace application are provided to demonstrate the effectiveness and potential of the theoretical results.
1 November 2026 in IEEE Transactions on Automatic Control
This note proposes a tube-based robust smooth transfer (TRST) control framework for a class of discrete-time switched systems under exogenous $\ell _\infty$ additive disturbances. TRST applies a set of smooth transfer (ST) controllers and stabilizing controllers alternately to guarantee the robust stability of system. Particularly, it ensures that the system state, control input, and their bumps during switches are all bounded within the respectively characterized tubes that depend on the disturbance amplitude. We derive control synthesis and tube-based analysis methods for generic asynchronously switched systems, which include the synchronous case as a special case. Furthermore, we propose a new criterion named absolute ST performance (ASTP) to evaluate the bump of the system induced by the disturbances, independent of system states. Finally, we employ an aero-engine control example to illustrate the application of TRST and show the advantage of ASTP over the commonly used state-dependent relative ST performance index.
1 January 2026 in IEEE Transactions on Cybernetics