All materials can suffer from environmental degradation; the rate and extent of degradation depend on the details of the material composition and structure as well as the environment. The corrosion of silicate glasses, crystalline ceramics, and metals, particularly as related to nuclear waste forms, has received a lot of attention. The corrosion phenomena and mechanisms of these materials are different, but also have many similarities. This review compares and contrasts the mechanisms of environmental degradation of glass, crystalline ceramics, and metals, with the goal of identifying commonalities that can seed synergistic activities and advance the current knowledge in each area.
1 January 2004 in Journal of the Electrochemical Society
The intermetallic phases in AA7075-T6, including the nm-scale precipitate MgZnCu and 10-μm size Mg2Si, S-phase, Al7Fe2Cu(Mn), and Al15(FeMn)3(SiCu)2, were identified and evaluated with respect to chemical composition, structure, and relative nobility. Evaluation of each major intermetallic particle (IMP) after exposure of the alloy to electrolyte allowed assessment of their roles in the localized corrosion. Different corrosion scenarios, including dealloying, trenching, particle etching out/dissolution, localized anodic and cathodic behavior of the IMPs, and corrosion sequences were studied. Combined with previous studies, the results advance the understanding of the electrochemical properties and the associated mechanisms of localized corrosion in aluminum alloys.
8 February 2018 in Journal of the Electrochemical Society
There is a growing interest in conversion coatings based on titanium and/or zirconium as the result of the health and environmental issues associated with legacy chromate and phosphate conversion coatings. Any alternative technology should be environmentally friendly and cost effective, and also able to achieve comparable corrosion resistance and paint adhesion for ferrous and non-ferrous substrates. Conversion coatings based on titanium or zirconium seem to fulfill many of these requirements and thus offer a great potential for further applications. This literature review summarizes the scientific results in this rapidly growing area of research. Following the description of composition of conversion bath and deposition mechanism, the effects of process parameters for conversion baths such as pH, temperature, immersion time and agitation are presented together with coating characteristics. The effects of the type of substrate and substrate pre-treatment are explored for the most-studied substrates: Al alloys, zinc-coated steels and steels. Properties such as composition, morphology and thickness are summarized. The corrosion performance of the conversion coatings is discussed, as well as adhesion of organic coatings and delamination mechanism for a full coating system including substrate/coating/top-coat.
The monetary cost of corrosion is currently estimated at 3 to 4% of the global GDP considering direct costs exclusively. However, no study to date has quantified the environmental impact associated with steel corrosion. Here, we determined that the CO2 emissions associated with the steelmaking required to replace corroded steel will be 4.1–9.1% of the total by 2030 considering the European Union and recent U.S. greenhouse gas reduction targets. We suggest that implementing corrosion management best-practices could drastically reduce the greenhouse gas emissions associated with the replacement of corroded steel and emphasize the need for coordinated international efforts.
5 June 2018 in Journal of the Electrochemical Society
Potentiostatic temperature-scanned experiments were performed on 316L stainless steel and revealed that both the measured values of critical pitting temperature (CPT) and their distribution ranges increased with the decrease of the aggressiveness of exposure conditions. Previous models for CPT cannot explain these observations, so a model for CPT is proposed based on criteria for pit growth stability with added effects of the passive film breakdown. The criterion for pit stability is assumed to be the maintenance of a critical pit solution concentration at the pit surface, which requires the maximum pit dissolution current density to be equal to or greater than the diffusion current density associated with this critical concentration. The resulting model can explain many observations of nature of the CPT. The CPT is shown not to be a single-valued critical value; instead, it is a statistically distributed value based on the detailed behavior of many pitting events. For potentiostatic measurements, the measured CPT is just the temperature at which the first stable pit forms. The commonly recognized and tightly distributed CPT is determined from the perspective of pit growth stability and it represents the temperature with the highest probability to form the first stable pit.