Biosurfactants are amphipathic molecules with growing worldwide interest because of their low toxicity, high biodegradability and good ecological acceptability. They are produced by microorganisms and between them, filamentous fungi belonging Mucorales order have been reported as promising producers. However, most of these studies still use traditional submerged fermentation, a methodology with technical and economic problems. In this context, this work aimed the production of biosurfactant by Mucor hiemalis UCP 1309 using solid-state fermentation (SSF) as a low-cost alternative technology. Experiments were carried out using seven agro-industrial byproducts and wastes as substrates, supplemented with salt solution containing 5% waste soybean oil (WSO). Medium with the best result in the production of biosurfactant was used in a second fermentation, where a 22 full-factorial design (FFD) was performed to investigate the influence of inoculum size and concentration of WSO on surface tension. The results showed higher reduction of surface tension (to 28.1 mN/m) in fermentation using wheat bran. Also, the statistical analysis demonstrated significant effect of concentration of WSO on surface tension. Produced biosurfactant demonstrated excellent emulsifying properties with WSO, motor oil and burned motor oil, and the emulsions remained stable after 90 days of incubation. Therefore, this work demonstrated SSF as a suitable strategy for getting inexpensive and efficient biosurfactant and expediting its large-scale production. Moreover, we report, for the first time in the international literature, the production of biosurfactant using SSF by a Mucoralean fungus.
Prodigiosin is a microbial red pigment, mainly produced by the bacterium Serratia marcescens, considered as a promising antimicrobial, immunosuppressive and antiproliferative compound. However, its industrial commercialization is still limited because of the high cost of production mainly due to the use of expensive substrates. Hence, this work aimed to the sustainable production of prodigiosin by S. marcescens UCP 1549, using corn bran as alternative and low-cost substrate, and its application in soap coloring. According to the results, both bacterial growth and red pigment production occurred, achieving 7.24 g/L and 1.68 g/L of biomass and pigment yield, respectively. Positive result in the presumptive test indicated red pigment as prodigiosin, which was confirmed by UV-Visible spectrophotometry (maximum absorbance peak at 535 nm), TLC (Rf 0.9) and the functional groups identified by FTIR spectroscopy. Prodigiosin showed color stability at different pH values and NaCl concentration. The application of pigment in soap coloring was effective, suggesting its promising potential in the cosmetics industry as natural colorant. The results showed the biotechnological potential of S. marcescens UCP 1549 in the biotransformation of corn bran into prodigiosin, allowing a more economically and competitively industrial bioprocess.
Microbial surfactants are amphiphilic molecules with attractive industrial prospects due to their advantages over commonly commercialized chemical surfactants, such as low toxicity, high biocompatibility and biodegradability, and efficiency at extreme conditions. However, the large-scale production of biosurfactants still becomes uncompetitive due to the low yields and onerous costs, being considered the use of renewable substrates as a viable strategy. In this sense, the present study aimed to investigate the sustainable production of biosurfactant by the yeast Issatchenkia orientalis UCP 1603 in 2 L of salt-based medium supplemented with 7.5% cassava wastewater, 5% corn steep liquor and 1% post-frying soybean oil. Fermentation was carried out in 2.8 L-Fernbach flasks for 72 h, at 28°C and 150 rpm, and reduction in surface tension to 30.1 mN/m was verified. The highest yield of the biosurfactant produced (4.02 g/L) was observed after extraction with 70% ethanol (2:1, v/v) and the isolated biosurfactant reduced the surface tension of the medium to 28.7 mN/m, the interfacial tension against n-hexadecane to 16.6 mN/m and has a CMC of 800 mg/L. The biocompound showed anionic and polymeric nature and did not present toxicity against cabbage (Brassica oleracea var. capitata) seeds. The stability in the range of pH 4-10, salinity 5-25% and temperature 5-100°C, evidenced a highly stable biosurfactant, with promising potential of application in several industrial activities or environmental processes in adverse conditions.
16 January 2022 in Research, Society and Development
In this work it was investigated the potential of Mucorales fungi isolated from the Caatinga of Pernambuco state for production of biosurfactants using renewable substrates. The strains (Mucor circinelloides UCP 0005, M. circinelloides UCP 0006 and Rhizopus arrhizus UCP 1609) were cultivated in alternative culture media consisting of instant noodle waste (INW), corn steep liquor (CSL) and post-frying soybean oil (PFSO), according to conditions established by a 23 full-factorial design (FFD). The production of biosurfactants was evaluated by determining surface tension and emulsification index (EI24) and statistical analysis was performed using Pareto diagram. The presence of the main sources of carbon and nitrogen in production medium was confirmed by FTIR spectroscopy. According to the results, the three fungi evaluated were able of produce biosurfactant in media containing renewable sources. However, the strain that showed the greatest reduction in surface tension (72 to 27 mN/m) was M. circinelloides UCP 0006 in condition 3 of the FFD (1% INW and 4% CSL, in absence of PFSO). The infrared analysis of the INW showed the presence of carbohydrates, fatty acids and proteins, proving that this is a suitable substrate for the cultivation of fungi. The biosurfactants produced by M. circinelloides UCP 0005 and M. circinelloides UCP 0006 were able to form water-in-oil emulsions and the biosurfactant from R. arrhizus UCP 1609 formed oil-in-water emulsions. The present study demonstrated that the three Mucorales fungi tested were able to produce biosurfactants from renewable sources, with emphasis on M. circinelloides UCP 0006.
12 August 2022 in Research, Society and Development
Global demand for natural pigments and dyes has increased much in recent years, driven by a heightened awareness of the toxic effects of various synthetic dyes on pollution of the environment and health human. The pigments and colorants obtained through plants and microbes are the primary source exploited by modern industries. Among the other non-conventional sources, filamentous fungi particularly are known to produce an extraordinary range of colors including several chemical classes of pigments such as melanins, azaphilones, flavins, phenazines, and quinines. The objective of this work was to evaluate the production of pigments produced by Talaromyces spp. and its antimicrobial activity. In this context, strains of the fungi Talaromyces spp. were isolated from soil of biome Caatinga and showed production of dark red, red and yellow pigments. Almost all fungi were able to grow and produce soluble pigments in the solid medium containing different carbon sources (sucrose, fructose, glucose, maltose, and starch), as well as in different salinity concentrations (0.5%, 1%, 2%, 4% and 6%), kept at room temperature (28ºC). All the extracted pigments showed antimicrobial activity against to bacteria Gram negative, as well as to yeasts, evidencing the high potential of application in the textile industry to produce antimicrobial fabrics.
The reutilization of agro-industrial by-products for obtaining of high-value added biosurfactants is a promising approach for minimizing the total production costs. In this context, this study aimed to evaluate the production of biosurfactant by the Mucoralean fungus Syncephalastrum racemosum UCP 1302, by bioconversion of renewable substrates: cassava wastewater (CWW), waste soybean oil (WSO) and corn steep liquor (CSL). For this, a 23 full-factorial design (FFD) was applied and the results showed the ability of this strain to produce biosurfactant in all conditions of the FFD, standing out the condition 7 due to the greatest reduction of surface tension (from 72 to 30.9 mN/m). Preliminary characterization showed the lipopeptide nature of the biomolecule, as well as its anionic character and critical micellar concentration (CMC) of 1.25 mg/ml. Biotensoactive demonstrated stability to variations of temperature, pH and NaCl concentrations, wettability in polyester textile and it was effective on reduction of viscosity of burned motor oil. Hence, S. racemosum showed excellent ability to produce biosurfactant by green bioconversion of low-cost substrates, making the bioprocess economical and enabling its biotechnological applications.