Steady laminar natural convection around a heat conducting and generating solid body inside a two-dimensional tilted square enclosure with different thermal boundaries are investigated numerically. The mathematical model is governed by the coupled equation of mass, momentum and energy. These equations are solved using SIMPLE algorithm by means of the finite-volume method together with under-relaxation technique. Effect of angle of inclination of enclosure, aspect ratio of solid-enclosure, temperature difference ratio of solid-fluid and the thermal conductivity ratio of solid-fluid are analyzed. The fluid circulation and the corresponding heat transport inside the enclosure are represented in terms of streamlines and isotherms respectively
The existing work is focused on the numerical modelling of mixed convection of Cu-water nanofluid in a square enclosure filled with non-darcian fluid saturated porous medium. The enclosure object has cooled vertical walls and insulated horizontal walls. Finite volume method has been employed to solve the generalised Darcy-Brinkmann Forchheimer extended momentum and energy equations. The parametric study has been taken out for wide ranges of Richardson number, Darcy number and solid volume fraction. The performance of nanofluid is tested inside an enclosure by using solid volume fraction and compared with respect to base fluid (water). A fair degree of precision can be found between the present and previously published work. The results are presented in the form of streamlines, isotherms, average nusselt number and velocity graphs; it clearly explained the influence of flow governing parameters on heat transfer rate and fluid flow within the enclosure.
Unsteady laminar natural convection in an enclosure with partially thermally active side walls and internal heat generation is studied numerically. Thermally inactive parts of the side walls and horizontal walls are thermally insulated. The governing equations are solved using the control volume method with a power law scheme. Nine different combinations of the hot and cold thermally active zones are considered. The effects of heat generations, aspect ratios, different Prandtl numbers, and locations of the thermally active part of the side walls on the flow pattern (streamlines), heat distribution (isotherms), midheight velocity, and rate of heat transfer from the walls of the enclosure are presented. It is observed that the heat transfer rate increases with increasing the Grashof number due to an increase in buoyancy force and decreases with an increase in heat generation. The heat transfer is found to be the maximum when the hot and cold thermally active locations are placed at the middle of the side walls.
Simulations are performed to examine magnetohydrodynamic convection of an Ag–water nanofluid within an inclined enclosure containing a center heater oriented in different directions. In performing the analysis, the left and right vertical walls are assumed to be isothermally cooled, while the bottom wall is isothermally heated and the top wall is adiabatic. The governing equations are solved numerically using the finite-volume method. The simulations focus on the effects of the Rayleigh number (Ra = 104, 105 and 106), Hartmann number (Ha = 0, 25 and 50), inclination angle (γ = 0°, 45°, 90° and 135°), orientation of heater (horizontal or vertical) and internal heat generation (S = 0, 10 and 20) on the convective heat transfer performance within the enclosure. The results show that the heat transfer performance is dominated by the inclination angle of the enclosure and the Hartmann number. In particular, the heat transfer rate reduces as inclination angle and Hartmann number increase. The maximum heat transfer performance is obtained with a vertical center heater, an inclination angle of γ = 45° and a Rayleigh number of Ra = 106. It is additionally shown that the heat transfer performance improves with an increasing volume fraction of nanoparticles.
21 May 2022 in International Journal of Biomathematics