In Fourier-domain optical coherence tomography (FD-OCT), proper signal sampling and dispersion compensation are essential steps to achieve optimal axial resolution. These calibration steps can be performed through numerical signal processing, but require calibration information about the system that may require lengthy and complex measurement protocols. We report a highly robust calibration procedure that can simultaneously determine correction vectors for nonlinear wavenumber sampling and dispersion compensation. The proposed method requires only two simple mirror measurements and no prior knowledge about the system’s illumination source or detection scheme. This method applies to both spectral domain and swept-source OCT systems. Furthermore, it may be implemented as a low-cost fail-safe to validate the proper function of calibration hardware such as k-clocks. We demonstrate the method’s simple implementation, effectiveness, and robustness on both types of OCT systems.
This work demonstrates the combination of optical coherence tomography (OCT) and hyperspectral imaging (HSI) using a double-clad optical fiber coupler. The single-mode core of the fiber is used for OCT imaging, while the inner cladding of the double-clad fiber provides an efficient way to capture the reflectance spectrum of the sample. The combination of both methods enables three-dimensional acquisition of the sample morphology with OCT, enhanced with complementary molecular information contained in the hyperspectral image. The HSI data can be used to highlight the presence of specific molecules with characteristic absorption peaks or to produce true color images overlaid on the OCT volume for improved tissue identification by the clinician. Such a system could be implemented in a number of clinical endoscopic applications and could improve the current practice in tissue characterization, diagnosis, and surgical guidance.
SignificancePassive quadrature demultiplexing allows full-range optical coherence tomography (FR-OCT). However, imperfections in the wavelength- and frequency-response of the demodulation circuits can cause residual mirror artifacts, which hinder high-quality imaging on both sides of zero delay.AimWe aim at achieving high mirror artifact extinction by calibrated postprocessing of the FR-OCT signal.ApproachWe propose a mathematical framework for the origin of the residual mirror peaks as well as a protocol allowing the precise measurement and correction of the associated errors directly from mirror measurements.ResultsWe demonstrate high extinction of the mirror artifact over the entire imaging range, as well as an assessment of the method’s robustness to time and experimental conditions. We also provide a detailed description of the practical implementation of the method to ensure optimal reproducibility.ConclusionThe proposed method is simple to implement and produces high mirror artifact extinction. This may encourage the adoption of FR-OCT in clinical and industrial systems or loosen the performance requirements on the optical demodulation circuit, as the imperfections can be handled in postprocessing.
Optical coherence tomography (OCT) is a powerful imaging modality that relies on interferometry to image subsurface structures.1 It provides cross-sectional images of tissue morphology up to several millimeters deep, with axial resolutions ranging from 1 to .2,3 Using optical fiber technology, OCT has been adapted to endoscopic imaging in various fields, which include cardiology,4 gastroenterology,5–7 laryngology,8 urology,9 and gynecology.10 Furthermore, highly miniaturized OCT probes have enabled access to deep organ structures that are inaccessible to standard video endoscopes.11 As such, OCT has the potential to expand current diagnostic capabilities in endoscopic practices.
Precise and accurate length measurements of optical fibers are increasingly needed across various applications. However, many commercially available devices are either too inaccurate or, conversely, too advanced and costly for basic fiber length determinations. In this Letter, we present a simple and relatively inexpensive method to measure the length of optical fibers with a precision of 1.06 ps (∼212 μm). This method exploits the relationship between the phase difference of a fiber under test (FUT) and a calibrated reference path as a function of frequency, measured by a phase-locked loop during a frequency sweep. We highlight key processing steps to achieve reproducible results and important considerations regarding environmental conditions.
SignificanceEsophageal cancer is becoming increasingly prevalent in Western countries. Early detection is crucial for effective treatment. Multimodal imaging combining optical coherence tomography (OCT) with complementary optical imaging techniques may provide enhanced diagnostic capabilities by simultaneously assessing tissue morphology and biochemical content.AimWe aim to develop a tethered capsule endoscope (TCE) that can accommodate a variety of point-scanning techniques in addition to OCT without requiring design iterations on the optical or mechanical design.ApproachWe propose a TCE utilizing exclusively reflective optics to focus and steer light from and to a double-clad fiber. Specifically, we use an ellipsoidal mirror to achieve finite conjugation between the fiber tip and the imaging plane.ResultsWe demonstrate a functional all-reflective TCE. We first detail the design, fabrication, and assembly steps required to obtain such a device. We then characterize its performance and demonstrate combined OCT at 1300 nm and visible spectroscopic imaging in the 500- to 700-nm range. Finally, we discuss the advantages and limitations of the proposed design.ConclusionsAn all-reflective TCE is feasible and allows for achromatic high-quality imaging. Such a device could be utilized as a platform for testing various combinations of modalities to identify the optimal candidates without requiring design iterations.