4 December 2017 in Journal of Lightwave Technology
Supporting the ever-increasing data-center-interconnect (DCI) traffic in a cost-effective manner is a great challenge, which requires innovative transmission and digital signal processing (DSP) techniques. Recently, single side-band (SSB) direct-detection (DD) transmissions have been actively considered for data rates beyond 100 Gb/s per channel and distance of hundreds of kilometers due to its capability of electronic chromatic dispersion (EDC) compensation. In addition, several effective DSP techniques to mitigate or suppress the signal-signal beating interference (SSBI) due to the squared-law detection of the photodiode (PD) have been intensively investigated, such as Kramers-Knonig (KK) and SSBI cancellation schemes, showing promising performance at data rates over 200 Gb/s and distance beyond 100 km. In this paper, we demonstrate that high-performance, low-complexity SSB DD transmissions can be achieved by generating a digital carrier (virtual carrier) together with the complex information-bearing signal at the transmitter using only two digital-to-analog converters (DACs). Combining this transmission technique with either the KK field reconstruction or a two-stage SSBI cancellation scheme at the receiver, 8-channel WDM signals with a net data rate of 1.72 Tb/s have been transmitted successfully over a record span length of 200 km at 1550 nm.
3 May 2022 in Journal of Lightwave Technology
We summarize our experimental exploration of the capabilities of an ultrabroad-bandwidth plasmonic Mach-Zehnder modulator (MZM), in an intensity modulation and direct detection (IM/DD) system for short-reach optical transmission up to 10 km. We study modulation, transmission, and reception of ultrahigh-symbol-rate (up to 304 GBd) multi-level optical signals with two different signaling schemes: pulse amplitude modulation (PAM), with up to 8 amplitude levels and partial-response-encoded binary (polybinary) modulation with memory length up to 4. By mapping the performance to a concatenated soft-decision (SD) and hard-decision (HD) forward error correction (FEC) coding scheme, a net bitrate of 363.4 Gbit/s is possible with PAM-8 signaling and 279.0 Gbit/s with tetrabinary (polybinary) signaling after 10 km standard single-mode fiber transmission. Considering an HD-only coding scheme, a net bitrate of 318.0 Gbit/s is possible with PAM-6 and 277.1 Gbit/s with tetrabinary.
22 July 2019 in Journal of Lightwave Technology
Intensity-modulation with direct-detection (IM/DD) provides a low-cost solution for the data center optical interconnects. To achieve higher data rate, Tomlinson-Harashima precoding (THP) is adopted to increase the operating symbol rate beyond the Nyquist rate defined by the system bandwidth. By applying THP, the signal is precoded by a feedback filter at the transmitter for the mitigation of the inter-symbol interference (ISI) caused by the faster-than-Nyquist (FTN) signaling and the spectral power fading induced by the interaction of the chromatic dispersion (CD) and the direct detection. In this paper, high-performance THP based IM/DD transmission is demonstrated, increasing the achievable data rate using a limited system bandwidth. In the experimental demonstration, we achieve a net bit rate of 185 Gb/s for up to 2 km fiber link, transmitting 74 GBd precoded 8-level pulse amplitude modulation (PAM-8) using an IM/DD system with 33 GHz brick-wall electrical bandwidth limitation.
6 February 2017 in Journal of Lightwave Technology
We successfully tested the suitability of probabilistically shaped constellations in a German nationwide fiber ring of the R&D field test network of Deutsche Telekom. In this ring, eight German cities can be reached by add/drop nodes implemented by passive optical add/drop multiplexers, offering 12 bands of 400 GHz widths in the extended C-band. Multiple cascaded add/drop multiplexers are reducing the available bandwidth. We transmitted a 1 Tb/s four-carrier super-channel with an extended family of probabilistically shaped constellations using 16QAM, 36QAM, and 64QAM and variable bandwidth. We verified in the field environment by two examples that probabilistic shaping is outperforming standard 64QAM and 16QAM formats in reach. We experimentally tested two typical 1 Tb/s working paths with 419 and 951 km, demonstrating spectral efficiencies of 6.75 and 5 bit/s/Hz, respectively. The maximum reach of about 1500 km was extrapolated for a 1 Tb/s probabilistically shaped super-channel transmitted in a 200 GHz bandwidth. For protection paths with longer distances than 1500 km, the spectral efficiency has to be reduced with the net-bitrate in steps of 100 Gb/s. For the longest bidirectional path of the test network, i.e., a protection path of 2159 km, the maximum achieved net-bitrate was 800 Gb/s.
26 October 2021 in Journal of Lightwave Technology
High-symbol-rate coherentoptical transceivers suffer more from the critical responses of transceiver components at high frequency, especially when applying a higher order modulation format. We recently proposed a neural network (NN)-based digital pre-distortion (DPD) technique trained to mitigate the transceiver response of a 128 GBaud optical coherent transmission system. In this paper, we further detail this work and assess the NN-based DPD by training it using either a direct learning architecture (DLA) or an indirect learning architecture (ILA), and compare performance against a Volterra series-based ILA DPD and a linear DPD. Furthermore, we deliberately increase the transmitter nonlinearity and compare the performance of the three DPDs schemes. The proposed NN-based DPD trained using DLA performs the best among the three contenders. In comparison to a linear DPD, it provides more than 1 dB signal-to-noise ratio (SNR) gains at the output of a conventional coherent receiver DSP for uniform 64-quadrature amplitude modulation (QAM) and PCS-256-QAM signals. Finally, the NN-based DPD enables achieving a record 1.61 Tb/s net rate transmission on a single channel after 80 km of standard single mode fiber (SSMF).
16 September 2019 in Journal of Lightwave Technology
Due to the growing demand for cloud services with high availability, high connection speed and low latency, distributed data-centers have emerged as a key architecture for future optical networks. This architecture relies on power and cost-efficient solutions for 400 Gb/s client interfaces over distances up to 80 km which can be densely wavelength-division multiplexed (WDM) in the C-band. Recently, single side band (SSB) direct detection (DD) has been considered as an attractive transmission scheme for achieving data rates beyond 100 Gb/s per channel due to its capability of electronic dispersion compensation. However, as SSB DD schemes utilize only a single polarization for data transmission, achieving 400 Gb/s per channel requires a baudrate beyond 80 Gbaud, which might reduce the effectiveness of the commonly used signal-signal beat interference (SSBI) cancellation techniques such as iterative SSBI cancellation or Kramers-Kronig algorithm due to the imperfection of Tx drivers, modulator and Rx front-end. In this paper, through effective Tx calibration and Rx DSP, we have achieved for the first time a net data rate per channel above 400 Gb/s with a 64 QAM signal at 85 Gbaud using a single photodetector (PD) at the receiver. In addition, a WDM transmission consisting of 5 channels at 100 GHz spacing was successfully conducted. This result indicates that SSB DD is an effective transmission technique for high capacity data center interconnect (DCI) applications.