3 May 2022 in Journal of Lightwave Technology
We summarize our experimental exploration of the capabilities of an ultrabroad-bandwidth plasmonic Mach-Zehnder modulator (MZM), in an intensity modulation and direct detection (IM/DD) system for short-reach optical transmission up to 10 km. We study modulation, transmission, and reception of ultrahigh-symbol-rate (up to 304 GBd) multi-level optical signals with two different signaling schemes: pulse amplitude modulation (PAM), with up to 8 amplitude levels and partial-response-encoded binary (polybinary) modulation with memory length up to 4. By mapping the performance to a concatenated soft-decision (SD) and hard-decision (HD) forward error correction (FEC) coding scheme, a net bitrate of 363.4 Gbit/s is possible with PAM-8 signaling and 279.0 Gbit/s with tetrabinary (polybinary) signaling after 10 km standard single-mode fiber transmission. Considering an HD-only coding scheme, a net bitrate of 318.0 Gbit/s is possible with PAM-6 and 277.1 Gbit/s with tetrabinary.
6 August 2021 in Journal of Lightwave Technology
We demonstrate concepts and results of a field trial for a flexible-rate passive optical network (FLCS-PON), which delivers bitrates up to 100 Gbit/s and allows for adaptations in the transmission method to match the users’ channel conditions and optimize throughput. FLCS-PON builds on top of the hardware ecosystem that will be developed for ITU-T 50 Gbit/s PON and employs three new ingredients: optical network unit (ONU) grouping, flexible modulation format, and flexible forward error correction (FEC) code rate. Together, these techniques take advantage of the optical distribution network (ODN) statistics to realize a system capable of more than twofold throughput increase compared to the upcoming 50 Gbit/s PON, but still able to support a full array of deployed fiber edge cases, which are problematic for legacy PONs. In this paper we explain the concepts behind enabling techniques of FLCS-PON. We then report on a field trial over a deployed fiber infrastructure, using a system consisting of one FLCS-PON OLT and two ONUs. We report both pre- and post-forward-error-correction (post-FEC) performance of our system, demonstrating achievable net bitrate over an operator's fiber infrastructure. We realize a downlink transmission at double the speed of ITU-T 50 Gbit/s PON for ONUs exhibiting lower optical path loss (OPL), while simultaneously continue to support ONUs at high OPLs. We additionally realize a record-high 31.5 dB loss budget for 100 Gbit/s transmission using a direct-detection ONU with an optical preamplifier.
28 March 2023 in Journal of Lightwave Technology
Next-generation passive optical networks (PONs) with upstream rates of 50 Gbit/s and beyond will require a new class of burst-mode transimpedance amplifiers (BMTIAs) that are linear to enable (digital) equalization of channel impairments. Such linear BMTIAs also enable higher-order modulation formats like 4-level pulse amplitude modulation (PAM-4). In this paper, we demonstrate operation of a novel linear BMTIA integrated together with a commercial off-the-shelf 25G-class avalanche photodiode (APD), achieving 50 Gbit/s non-return-to-zero (NRZ) operation with a sensitivity of -23.7 dBm optical modulation amplitude (OMA) and dynamic range exceeding 21.7 dB and 100 Gbit/s PAM-4 operation with a sensitivity of -15.8 dBm OMA and dynamic range exceeding 15.4 dB, both at a bit error ratio (BER) of $10^{-2}$ . In addition, fast burst-mode gain-control and balancing circuits limit loud-soft sensitivity penalties in the case of AC-coupled circuits to less than 1.3 dB. The chip was designed in a 0.13 $\mu$ m SiGe:C BiCMOS technology, has an area of 1.2×1.7 mm $^{2}$ and consumes between 260 mW and 310 mW. This receiver paves the way to a next-generation class of BMTIAs, supporting the ITU-T G.9804.3 Amd 1 standard.
21 March 2023 in Journal of Lightwave Technology
In this paper, we employ artificial neural networks (ANNs) to optimize joint probabilistic shaping (PS) and geometric shaping (GS) for a realistic 50G IM/DD passive optical network (PON) link. Apart from being able to find a generalized mutual information (GMI)-maximizing modulation for channel conditions unseen at the training phase, the compatibility of the ANN training with Monte Carlo simulation also enables us to use a more complicated channel model that more closely resembles a real PON system where fiber dispersion, bandwidth limitation and digital signal processing (DSP) are present. The forward error correction (FEC) requirement that must be satisfied in an actual implementation is imposed on the learned modulation by including a normalized GMI (NGMI) penalty term in the loss function. The proposed scheme is demonstrated with simulations. Results show that the ANN can achieve similar performance compared to a case-by-case optimization while also being capable of generalizing to a wide range of received optical power (ROP) from −30 dBm to −18 dBm and/or a broad range of fiber distance from 0 km to 20 km. About 0.1-bits/symbol GMI improvement is attained compared to uniform modulation.
26 January 2015 in Journal of Lightwave Technology
Efficient nonlinear four-wave-mixing (FWM) interactions can be realized by either phase-matching or quasi-phase-matching (QPM) the optical waves involved. Conventionally, this is only achieved for a limited set of FWM processes. In this paper, we develop a method to simultaneously realize QPM of two arbitrary FWM processes. This double QPM method combines two QPM techniques, namely QPM by phase-mismatch switching for one process, and QPM by dispersion compensation for the other. To our knowledge, this scheme is the first one that can realize efficient interactions for two arbitrary FWM processes in essentially any type of waveguide medium that is characterized by a single zero-dispersion point in the wavelength domain of interest. We apply the proposed scheme to design two devices that can be operated at larger pump-signal frequency differences than previously possible, namely a wavelength converter switch and a one-to-two Raman wavelength converter. Hence, the double-QPM method allows optical waves to interact through a larger number of nonlinear optical processes, and enables novel FWM-based applications.
28 January 2020 in IEEE Access
As a non-linear precoding alternative to Tomlinson-Harashima precoding (THP), in this paper, so-called lattice reduction aided precoding (LRP) is considered as a crosstalk precompensation technique for downstream transmission in G.fast DSL networks. First, a practically achievable bit-rate expression for LRP is proposed in function of the precoder and integer matrix. The problem then consists of a joint precoder and integer matrix design in order to maximize the weighted sum-rate (WSR) under per-line power constraints. For a fixed integer matrix, zero-forcing (ZF) precoder matrix design simplifies to gain scaling optimization with complex gain scalars, for which a successive lower bound maximization method is presented. Additionally, it is established that the achievable ZF-LRP sum-rate is upper bounded by the achievable ZF-THP sum-rate at high SNR. For computing the optimal precoder matrix, on the other hand, an efficient method is developed by leveraging on the equivalence between the WSR maximization and the weighted sum of mean squared error (MSE) minimization, leading to a locally-optimal MMSELRP solution. Simulations with a measured G.fast cable binder are provided to compare the proposed LRP schemes with THP schemes.