Hao Bai

Hao Bai

Auto-generated profile, based on publicly available information

Hao Bai

State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing 102249, China

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 August 2021 in ACS Omega
Verified
Journal Article
Open access
EYErdong Yao
Erdong Yao
HBHao Bai
Hao Bai
Fujian ZhouFujian Zhou
Fujian Zhou
MZMengchuan Zhang
Mengchuan Zhang
Jie WangJie Wang
Jie Wang
FLFuyuan Li
Fuyuan Li
The traditional guar gum fracturing fluid system has the drawbacks of the fracturing process of unconventional oil and gas deposits, such as high drag resistance and large residuum harm, which is gradually replaced by the system of the slick water fracturing fluid. The conventional slick water system, however, still has the features of low sand-carrying capability. Therefore, high-viscosity slick water is often used in fracturing operations, but most of the high-viscosity slick water is difficult to prepare, dissolve, and break gels, which needs to be improved. Based on the abovementioned problems, a new type of multifunctional variable-viscosity slick water is proposed in this paper. The self-made loop drag test unit, a dynamic crack sand-carrying model, a multifunctional core flow device, and other equipment were used for testing, and a set of systematic evaluation methods for the performance of multifunctional variable-viscosity slick water are established. In addition, the mechanism of improving sand-carrying capacity and increasing viscosity and solubilization was explained through the macroevaluation experiment of polymer properties and the analysis of the polymer microstructure. The experimental results show that compared with high-viscosity slick water, the multifunctional variable-viscosity slick water has good drag-reducing performance, the drag-reducing rate can reach more than 75%; the intersection value of viscoelastic modulus is about 0.01 Hz, the sand carrying capacity is higher; the gel-breaking time is faster, the residue content is lower, 38.5 ppm; it has the characteristics of low harm, the harm rate to the core is 18.30%; and it also has the performance of enhancing oil recovery.

1 November 2020 in Journal of Natural Gas Science and Engineering
Verified
Journal Article
Closed access
JWJie Wang
Jie Wang
Fujian ZhouFujian Zhou
Fujian Zhou
HBHao Bai
Hao Bai
DWDongya Wei
Dongya Wei
JMJilong Ma
Jilong Ma
LYLishan Yuan
Lishan Yuan

4 April 2022 in ACS Omega
Verified
Journal Article
Open access
Er-dong YaoEr-dong Yao
Er-dong Yao
GYGuolin Yu
Guolin Yu
BLBojun Li
Bojun Li
LZLonghao Zhao
Longhao Zhao
YLYuan Li
Yuan Li
Fujian ZhouFujian Zhou
Fujian Zhou
The polyacrylamide weak gel is an effective system to block a high-permeability layer, realize water control, and enhance oil recovery. However, its application is limited by poor temperature resistance and high polymer dosage. In this paper, an inorganic–organic composite cross-linking agent was synthesized by using Cr(III) and phenolic resin. The composite cross-linking agent can cross-link low concentrations of polyacrylamide to obtain a high-temperature-resistant weak gel system in oilfield sewage. By adjusting the ratio of Cr(III), phenolic resin, and polyacrylamide, an optimum formula MF-7 can be obtained according to the gel strength. Results from evaluation experiments show that the strength of MF-7 can reach H grade even at polyacrylamide concentrations as low as 0.3%. The temperature resistance of the weak gel system is up to 100 °C, and no syneresis occurs after 330 h at 95 °C. Scanning electron microscopy (SEM) results show that MF-7 has a three-dimensional network structure with spherical nodes. The spherical node is composed of polyacrylamide, and its structure size is completely matched with the hydrodynamic radius of the used polyacrylamide. When combined with the network structure formed by Cr(III), the dense cross-linking network structure with nodes can greatly improve the strength and thermal stability of the gel system. The higher the molecular weight of the polyacrylamide used, the higher the strength of the gel obtained. Overall, the composite cross-linking agent can synergistically improve the mechanical properties of the gel, and this weak gel system formed by oilfield sewage is more economical and tolerant.

29 November 2023 in SPE Journal
Verified
Journal Article
Closed access
PDF file
HXHang Xu
Hang Xu
Fujian ZhouFujian Zhou
Fujian Zhou
HWHao Wu
Hao Wu
SYSasa Yang
Sasa Yang
YLYuan Li
Yuan Li
HXHualei Xu
Hualei Xu
Summary: Hydraulic fracturing is an effective stimulation method to establish high-conductivity channels in tight reservoirs, and the effectiveness of man-made fractures largely depends on the proppant-carrying capacity of the fracturing fluids used. As a novel completion fluid, silica gel-based fracturing fluids have shown desirable stimulation effect in application cases, but a comprehensive evaluation of their proppant settling and transport behaviors in the laboratory remains lacking. In this paper, a silica gel-based fracturing fluid was prepared first, and then the rheological properties, including shear thinning, recovery behavior, and viscoelasticity of the fluid system, were measured. Afterward, the settling velocity of single-particle proppant and the settling rate of multiparticle proppant under various experimental conditions were investigated in the static fluid system; in addition, the dynamic proppant-carrying performance was evaluated using a visualized rough fracture model to study different factors on the dune distribution inside the fractures. Lastly, the proppant-carrying mechanism of silica gel-based fracturing fluid was revealed in three aspects. The rheological test result showed that the shear viscosity of silica gel-based fracturing fluid increased as the SiO2 concentration increased. Furthermore, all tested fluid samples exhibited an elastic modulus that is consistently greater than the viscous modulus, indicating that the silica gel-based fracturing fluid system has a dominant elastic response behavior. In the single-particle static settling test, there was a significant increase in the settling velocities as the particle diameter increased and as the temperature increased. Meanwhile, the settling rate of multiparticles showed a decreasing trend with the increase in mesh size, while the proppant settling rate gradually increased as the proppant concentration rose. The results of dynamic proppant-carrying experiments demonstrate that a higher pumping rate leads to an extended migration distance for proppant, resulting in formed sand dunes with reduced height within fractures. Conversely, an increase in proppant concentration and a reduction in mesh size tend to form higher sand dunes. The proppant-carrying mechanisms of the silica gel-based fracturing fluid relate to the self-polymerization and syneresis of silica gel, the noticeable elasticity characteristics, and the structural encapsulation effect formed between silica gel and proppant. A better understanding of the proppant settling and transport behaviors of silica gel-based fracturing fluid can be helpful in optimizing the hydraulic fracturing design and promoting field application.

1 March 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
HXHang Xu
Hang Xu
YLYuan Li
Yuan Li
HWHao Wu
Hao Wu
ZDZhiyuan Ding
Zhiyuan Ding
SYShuai Yuan
Shuai Yuan
Fujian ZhouFujian Zhou
Fujian Zhou
Nanoemulsions have garnered great attention as a chemical additive for enhanced oil recovery (EOR) technology worldwide due to their small size and unique physicochemical properties. Herein, this work introduces a novel nonionic surfactant-stabilized nanoemulsion prepared using a low-energy method for EOR projects in the Chang 8 tight reservoir. Spontaneous imbibition experiments were conducted in oil-saturated cores, and secondary imbibition experiments were carried out in water-bearing cores. Additionally, core flooding experiments were performed to study the EOR performance of both nanoemulsion and complex surfactant. Finally, the EOR mechanisms were thoroughly investigated, specifically focusing on oil-washing capacity, reduced interfacial tension, and wettability alteration. The designed nanoemulsion, with droplets averaging 10.5 ± 0.7 nm in synthetic formation brine at ambient temperature, exhibits excellent thermal and long-term stability even under reservoir temperature conditions. The oil recovery efficiency of the nanoemulsion system in oil-saturated cores through spontaneous imbibition was 31.28%, representing a 6.42% improvement over the complex surfactant solution. In the secondary imbibition experiments, the nanoemulsion mobilized 8.53% of the residual oil, compared to 4.11% for the complex surfactant. Core flooding experiments revealed that the nanoemulsion system achieved a total oil recovery of 62.69%, outperforming the complex surfactant system by 8.68% during the chemical flooding stage and 1.82% during the subsequent brine flooding stage. The EOR mechanisms of nanoemulsion in tight reservoirs can be attributed to four aspects: reduction of oil/water interfacial tension, wettability alteration, miscibility with crude oil, and increased sweep volume. The generation of the Marangoni effect and the adsorption and diffusion characteristics are essential differences between the nanoemulsion system and the complex surfactant system. The presented findings in this paper could aid in promoting the large-scale use of nanoemulsions in Chang 8 tight reservoirs.

22 February 2024 in ACS Omega
Verified
Journal Article
Open access
XYXiaopeng Yang
Xiaopeng Yang
LSLianqi Sheng
Lianqi Sheng
JSJunfeng Shi
Junfeng Shi
HFHongtao Fei
Hongtao Fei
DGDonghong Guo
Donghong Guo
Er-dong YaoEr-dong Yao
Er-dong Yao
In the Changqing area, over 23.6% of gas wells produce less than 0.1 × 104 m3/d of gas daily, posing a challenge to gas field sustainability. Laboratory analysis of scale samples from three wells and formation water analysis via inductively coupled plasma revealed soluble salt as the primary well blockage, with sodium chloride and calcium chloride comprising 48.0–81.2% of total content. The G3# well blockage contains a small amount of quartz from acid-insoluble components of carbonate acidification. Formation water from all wells exhibited high salinity (up to 153 g/L) with a calcium chloride water type. Scanning electron microscopy and EDS confirmed halite and quartz features in blockage samples. Theoretical calculations show salt crystallization when tubing pressure falls below 10 MPa and daily water production is 90%, and water >85%, making them suitable removal agents. For 3# blockage, mud acid with >80% dissolution is recommended. Chemical methods effectively clean the wellbore and formation. Optimized blockage removal measures increase tubing pressure and daily production by 2.18 and 4.05 times, respectively. This study offers insights into addressing well blockage challenges in low-producing gas wells.