1 January 2013 in International Journal of Energy for a Clean Environment
In view of the extreme importance of an effective cooling of power equipment, as confirmed by accidents that have taken place in nuclear reactors, development of nanofluids and study of their properties, intensity of heat transfer, including boiling crisis, are very important today. For this purpose, test units for pool boiling of nanofluids investigation were constructed. A nichrome wire at alternating current has been used as a heating source. Nichrome resistivity depends on a temperature. This fact is taken as a basis of the heater's temperature determination. All measurements, data collection, and calculations of the parameters (current, voltage, critical heat flux, heat transfer coefficient, etc.) were performed by a computer and developed software data acquisition and processing system in real time. Simultaneously graphical relationships were built that specified the above variables and parameters. The obtained results allowed some conclusions to be made about essential increase of a specific heat flux that defines the boiling crisis for a number of nanofluids, influence of initial concentrations of nanoparticles in liquids, presence of dispersants, nature of nanoparticles and regimes of a fluid flow on a boiling crisis, and a heat transfer coefficient. There were preliminary conclusions also made concerning possible mechanism of nanoparticle influence on a heat transfer at nanofluids boiling.
20 September 2023 in Energy Technologies & Resource Saving
The paper shows that the use of cryogenic technologies for the storage of electrical energy produced by renewable sources makes it possible to move from centralized energy supply systems to microgrids based on distributed energy systems. Also, cryogenic technologies make it possible to switch from centralized gas supply to individual supply of residential buildings and industrial enterprises with liquefied natural gas. It is expedient to create in Ukraine, on the basis of cryogenic storage systems of electricity produced by renewable sources, already existing local systems of electric power generation of various types, distributed systems of generation, united in micro-grids and virtual power plants. It is also possible to create virtual heating systems. Such technologies meet the requirements of the European Union for candidate countries to join the Union and open the possibility of financing projects related to the restoration of the energy system of Ukraine based on renewable sources and advanced energy-efficient technologies. The proposed scheme for obtaining liquid air and placing cryogenic equipment allows us to talk about the creation of a new sector of cryogenic energy in Ukraine. Bibl. 14, Fig. 2, Tab. 2.
20 March 2023 in Energy Technologies & Resource Saving
The article presents the results of the development of the modernization of the complex gas preparation installation, namely the modeling of the processes of removing heavy hydrocarbons at the stage of preparing natural gas for transportation. Heavy hydrocarbons, which are removed at this stage, become a separate commodity product in the process of processing. With the use of software systems for computer simulation of technological processes of GazCondNafta and HYSYS, a variant of the modernization of the existing installation of complex gas preparation of the gas condensate field was developed. Options for modeling technological schemes for obtaining target fractions of methane, ethane, propane, butane from natural gas, gas synthesis and pyrolysis gas are given. Bibl. 9, Fig. 5, Tab. 8.
20 September 2023 in Energy Technologies & Resource Saving
The results of theoretical and experimental studies of heat transfer through the window structures of the building are presented, the thermal characteristics of the windows are established and the level of heat loss realized through them is estimated. To determine the heat transfer resistance of two-chamber double-glazed units, numerical modeling of radiative-convective heat transfer is performed, taking into account the thermal conductivity of the gas layer between the glasses. Natural free convection of the gaseous medium in the double-glazed chambers occurs as a result of the temperature difference between the side glass surfaces of the chamber. Modeling is performed by numerically solving the system of fluid dynamics and energy equations for the air layer and glass. On the inner surfaces of the chambers, conditions of the fourth kind are set, which take into account the radiation and conductive components of the total heat flow coming from the glass surface. The results of simulation of heat transfer through double-glazed windows with ordinary glass indicate that about 60 % of heat is transferred by radiation. Therefore, an effective measure to reduce heat loss through windows is to reduce the radiation component of the total heat flow by applying a low-emissivity coating to the inner surfaces of the glass unit. This makes it possible to reduce the total heat flow (and, accordingly, heat loss to the environment) by 20–34 %, depending on the number of glass surfaces with this coating. Conducted independent experimental studies confirm the modeling results. In order to comply with the current requirements of state building regulations and to achieve the energy efficiency class of type C buildings (specific heat consumption for heating 1 sq. m of usable area is less than 75 kWh), for the climatic conditions of Kyiv, it is recommended to use double-chamber windows with two low-emission coatings with the formula of the glass unit: 4M1-10-i4M1-10-i4M1. Bibl. 22, Fig. 8.
20 December 2022 in Energy Technologies & Resource Saving
The peculiarities of storing electricity produced by traditional systems of its production and using renewable energy sources are considered, the state of the problem is discussed. Examples of industrial application of electricity storage systems using compressed and liquefied air are given. Liquid air storage systems have been shown to be the most efficient. A scheme for the accumulation of electricity and its production with the use of turbo-expander power generator units with the use of liquefied air is proposed. Taking into account the situation that has developed in Ukraine in connection with the spread of the COVID-19 virus, a scheme for obtaining liquid medical oxygen by the cryogenic method on low-tonnage transportable equipment is proposed. Bibl. 10, Fig. 2.
20 June 2024 in Energy Technologies & Resource Saving
The increase in global temperature caused by global climate warming is considered. Open data on Ukraine’s energy strategy until 2050, in particular on the production and use of natural gas and hydrogen, are provided. The results of the energy efficiency of the production of primary energy resources are presented, including main renewable energy sources. The relevance of the problem of production and use of hydrogen as a significant renewable source of reducing greenhouse emissions and increasing energy security is presented. The indicators and their critical indicators for the stability and stability of the terrestrial system of the socio-ecological state of the planet Earth are presented — the so-called planetary boundaries of sustainability, it is emphasized that not only climate change, but also the extinction of biodiversity is critical for life. In response to the latter, the main points of the Kunming-Montreal UN Global Framework Program until 2030 in the field of biodiversity are outlined, the main goal of which is to return the biosphere to recovery. Based on this year’s materials of the International Energy Agency, we will generally consider the global state of hydrogen issues from the point of view of the strategy for the development of production, distribution and final use of renewable hydrogen. Some environmental and energy characteristics of electrolytic hydrogen production are presented. Recommendations for the prospects of hydrogen use are given. Bibl. 34, Fig. 7, Tab. 2.