24 January 2020 in IEEE Transactions on Applied Superconductivity
22 January 2024 in IEEE Transactions on Applied Superconductivity
REBCO, the second generation of high-temperature superconducting (HTS) tape, has broad application prospects in nuclear fusion and high-field magnetic devices due to its excellent critical current density, superior mechanical properties, and electromagnetic characteristics. The REBCO-based six around one Cable-In-Conduit Conductor (CICC) for application in the toroidal field magnet of the China Fusion Engineering Test Reactor (CFETR) has been proposed. In this paper, two 1-m-long preliminary Twisted Stack Slotted-core Cables (TSSC) stacked by REBCO and copper tapes were fabricated. Subsequently, the critical current characteristics were tested at 77 K and self-field, and compared with the results simulated by the self-consistent model. The calculated values of the critical current are in high agreement with the experimental values, which proves the accuracy of the finite element model. The results of cross-section scanning after cutting the samples indicate that the gaps are uniformly filled with solder and the fabrication process is performed reliably. This study is of great importance for future applications of high-field fusion magnets.
1 January 2018 in Review of Scientific Instruments
High-Temperature Superconductors (HTS) are potential materials for high-field magnets, low-loss transmission cables, and Superconducting Magnetic Energy Storage (SMES) due to their high upper critical magnetic field (Hc2) and critical temperature (Tc). The critical current (Ic) of HTS, which is one of the most important parameters for superconductor application, depends strongly on the magnetic fields and temperatures. A new Ic measurement system that can carry out accurate Ic measurement for HTS short samples with various temperatures (4.2–80 K), magnetic fields (0–14 T), and angles of the magnetic field (0°–90°) has been developed. The Ic measurement system mainly consists of a measurement holder, temperature-control system, background magnet, test cryostat, data acquisition system, and DC power supply. The accuracy of temperature control is better than ±0.1 K over the 20–80 K range and ±0.05 K when measured below 20 K. The maximum current is over 1000 A with a measurement uncertainty of 1%. The system had been successfully used for YBa2Cu3O7-x(YBCO) tapes Ic determination with different temperatures and magnetic fields.
2 September 2021 in IEEE Transactions on Applied Superconductivity
Superconducting transformer, which used for power supply of the large current superconductor, is faced with the conductor sample current attenuation problem since the existence of joint resistance. A solution is proposed to solve this attenuation problem to make the conductor sample current controllable. The adaptive Proportion Integration Differentiation (PID) control strategy based on learning rates (η) Radial Basis Function (RBF) neural network (NN) is an improvement over the conventional PID algorithm. The algorithm is applied to obtain the optimal parameters for the PID controller to the working variations arising from transformer nonlinear dynamics. The controller system is carried out on the superconducting conductor test platform of the Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP). The results showed that the overall deviation of the system was within 0.2%. The performance of the proposed approach is validated by superconductor experiments under practical conditions.
23 January 2019 in IEEE Transactions on Applied Superconductivity
High-current superconducting conductors are widely used in fusion magnets, high energy accelerators and supercon-ducting power transmission. In order to carry out experimental research on new high-current conductors such as Bi2Sr2CaCu2Ox (Bi-2212) Cable-in-Conduit conductor (CICC), YBa2Cu3O7-x (YBCO) twisted stacked-tape cable (TSTC) conductor and Ruth-erford cable, we have developed a new test facility for their criti-cal current measurement. The key component of the facility is a 6 T dipole magnet with a useful bore of 80 mm, which is connect-ed through a pair of 6 kA binary current leads to the external DC power supply. The homogeneous high field length is 400 mm with uniformity better than 98%. Instead of the traditional expensive DC power supply and complicated current leads, a superconduct-ing transformer is used to supply the test sample with current up to 30 kA. Quench detection and protection system is also used for both the primary coil of superconducting transformer and 6 T dipole magnet. A NbTi Rutherford cable with 10 strands has been tested to verify the test facility. The status of our test facility and the test results are described in this paper.
13 December 2023 in IEEE Transactions on Applied Superconductivity
This paper presents the design and preliminary test results of a 20 T REBCO insert coil for a 35 T all superconducting magnet. The 20 T insert coil consists of two coils nested in series. The internal coil (coil 1) is composed of a stack of 20 REBCO double pancake (DP) coils, and the no-insulation (NI) winding approach was applied to increase its current density. The outer coil (coil 2) consists of 28 REBCO DP coils, metal-as-insulation (MI) technology was used to improve the overall mechanical strength and reduce the charging-delay time constant. The electromagnetic and mechanical analysis considering the screening current (SC) effect have been discussed in detail. The maximum hoop stress and hoop strain of the insert coil with the SC effect under operating conditions are 1010 MPa and 0.658%, respectively, but some favorable conditions have not been considered. The tests at 77 K and all assembly work have been completed. The preliminary test results of the insert coil at 4.2 K in self-field show that the large resistances of DP 3 and DP 4 in coil 1 caused the local temperature to rise, which led to the early quench of the whole insert coil. The maximum applied current was 229 A, and the actual central magnetic field with the SC effect was 18.4 T.