A novel and simple technique for Direction of Arrival (DoA) estimation in 802.11 Wi-Fi networks is proposed. It is based on the use of a dual-port frequency-beam scanning antenna, which is connected to single MIMO access point. By simply performing a channel hopping scheme and acquiring Received Signal Strength Information (RSSI) from each channel, the DoA can be estimated in a wide Field of View of 180° with a mean angular error of 5°. Due to its simplicity, a single commodity Wi-Fi AP can be used without the need of Channel State Information (CSI), or complex electronically reconfigurable or mechanically revolving antennas.
3 June 2022 in IEEE Journal of Radio Frequency Identification
This work proposes a novel system for location applications of RFID tags in UHF band. The system is based on a frequency-scanning leaky-wave antenna (LWA), commodity hardware and Angle-of-Arrival (AoA) estimation of the signal reflected from RFID tags, by using only RSSI (Received Signal Strength Indicator) data. The LWA is completely passive, manufactured in simple printed technology and directly connected to the RFID reader. The dispersive nature of the LWA combined with the selection of a proper high permittivity substrate allows the radiation of frequency steered directive beams. The system is based on four directive beams created by the two-port antenna and two RFID channels to estimate the AoA by amplitude-monopulse signal processing and angular pseudospectrum technique. Thus, our approach is efficient, simple and low-cost, since the use of expensive or complex hardware required for electronic phased-array steering/beam-switching is avoided and the required computational load is low. Several experiments have been performed in different scenarios, reporting a wide FoV of 130°, multi-tag detection and a RMSE of 8,1°.
26 October 2021 in IEEE Antennas and Wireless Propagation Letters
A compact printed-circuit leaky-wave antenna is designed to synthesize frequency-scanned monopulse patterns in the UHF RFID band from 902 to 928 MHz. A high-permittivity ceramic substrate is used to maximize the angular scanning range in such a narrow band. Two operating modes, i.e., narrow-field and wide-field modes, can be chosen by properly selecting the frequency channels and antenna ports. This allows to adapt to different fields of view while maximizing the maximum reading distance, as demonstrated with a fabricated prototype.
13 September 2023 in IEEE Transactions on Antennas and Propagation
We investigate the use of a single leaky wave antenna (LWA) for amplitude-monopulse direction finding when compared to the more conventional use of two tilted antennas. Thanks to the inherent bidirectional feeding and scanning behavior of LWAs, it is demonstrated a more compact and planar design while offering similar functionality in the far field. The frequency beam squinting effect suffered by the LWA, and its capability to create frequency-scanned monopulse patterns, are also analyzed; moreover, its smaller size mitigates the near-field effects, thus reporting a superior localization performance in the proximity of the antenna. This is experimentally demonstrated with prototypes designed in the 2.4 GHz ISM band, which are subsequently applied for direction finding of mobile devices connected to a Wi-Fi network.
A novel two-dimensional indoor location system for IoT devices employing a single Wi-Fi Access Point is presented. The x, y position is estimated with a combination of Directionof-Arrival (DoA) and Time-of-Flight (ToF) algorithms. The azimuthal DoA is estimated using a modified MUSIC technique, which requires the acquisition of the Received Signal Strength Indicator (RSSI) using different Wi-Fi frequency channels in the 2.4 GHz band, together with a dual-port frequency-scanning antenna (FSA). This allows a wide Field-of-View (FoV) of 180: for the DoA. To estimate the ranging distance, an algorithm based in the 802.11mc Fine Time Measurement (FTM) protocol is employed to consider the effects of the channel hopping. Therefore, the proposed system does not rely on Channel State Information (CSI) or complex IQ information, which is not available in commercial Wi-Fi APs. The proposed system has been fully implemented with a commercial Wi-Fi AP and tested in a practical scenario, proving a root-mean-square error (RMSE) when estimating the localization of mobile devices of only 1.43m, in a wide area of 12 m x 12 m.
8 March 2023 in IEEE Antennas and Wireless Propagation Letters
The functionality of a metadome to provide fast frequency conical beam scanning using a simple feeding, is reported in this letter. A metasurface composed by periodic patches covering a simple monopole antenna, acts as a partially reflective sheet to produce frequency-scanned conical beams. Then, the addition of a high impedance surface in the ground plane, is used to increase the scanning ratio. This is important to cover a wide scanning range using a narrow frequency bandwidth. A design example for conical direction finding with a field of view of 60 degrees and using the 200 MHz unlicensed band from 5.1 GHz to 5.3 GHz, is demonstrated with a metadome antenna prototype.