Here, we propose a fully-metallic implementation of a Luneburg lens operating at Ka-band with potential use for 5G communications. The lens is implemented with a parallel plate that is loaded with glide-symmetric holes. These holes are employed to produce the required equivalent refractive index profile of a Luneburg lens. Glide symmetry and inner metallic pins are employed to increase the equivalent refractive index. The lens is fed with rectangular waveguides designed to match the height of the parallel plate, and it is ended with a flare to minimize the reflections.

Antennas for future communication systems are required to be highly directive and steerable to compensate for the high path loss in the millimeter-wave band. In this work, we propose a linear array of modulated geodesic Luneburg lens (the so-called water drop lens) antennas operating at 56-62 GHz. The lens array antenna features two-dimensional beam scanning with low structural complexity. The lenses are fully metallic and implemented in parallel plate waveguides, meaning that they are highly efficient. Each lens is fed with 13 rectangular waveguides surrounded by glide-symmetric holes to suppress leakage. The lenses provide 110 degree beam coverage in the H-plane with scan losses below 1 dB. In order to scan in the E-plane, we use a feeding network based on a 1:4 power divider and three phase shifters. In this configuration, the array can scan 60 degrees in the E-plane, albeit with higher scanning losses than in the H-plane. The lens array is manufactured and a good agreement between simulated and experimental results is obtained.

We investigate the use of a single leaky wave antenna (LWA) for amplitude-monopulse direction finding when compared to the more conventional use of two tilted antennas. Thanks to the inherent bidirectional feeding and scanning behavior of LWAs, it is demonstrated a more compact and planar design while offering similar functionality in the far field. The frequency beam squinting effect suffered by the LWA, and its capability to create frequency-scanned monopulse patterns, are also analyzed; moreover, its smaller size mitigates the near-field effects, thus reporting a superior localization performance in the proximity of the antenna. This is experimentally demonstrated with prototypes designed in the 2.4 GHz ISM band, which are subsequently applied for direction finding of mobile devices connected to a Wi-Fi network.

This paper describes the design and realization of a transition from a microstrip line to a ridge gap waveguide operating between 95 and 115 GHz. The study includes simulations, measurements, and a Monte Carlo analysis of the assembly tolerances. The purpose of this tolerance study is to identify the most critical misalignments that affect the circuit performance and to provide guidelines about the assembly tolerance requirements for the proposed transition design.

The application of lenses combined with array antennas (also known as dome arrays or dome antennas) to the next generation of terrestrial and satellite communication systems brings a wide range of advantages in terms of improved radiation performance, reconfigurability in the use case, and reduction in power consumption. To facilitate the industrial implementation of dome antennas, highly efficient simulation tools are required. In this paper, we present a streamlined implementation of ray tracing for fast and efficient numerical analysis of the far-field radiation performance of 2D multilayer dielectric lenses combined with phased arrays. Unlike commercial physical-optical methods, our proposed ray-tracing method is capable of computing the effects of internal reflections in the dome in a multilayer configuration. In addition, the method estimates the absorption losses as a result of the Joule effect. To demonstrate the effectiveness of the proposed approach, we provide comparisons of the simulated radiation patterns using our proposed ray tracing with the results obtained from commercial full-wave simulation tools.

Quasi-optical beamformers provide attractive properties for antenna applications at millimetre-wave frequencies. Antennas implemented with these beamformers have demonstrated wide angle switching of directive beams, making them suitable as base station antennas for future communication networks. For these applications, it is essential to ensure a high beam crossover gain to provide a robust service to end users within the steering range. Here, we propose a geodesic generalized Luneburg lens antenna operating from 57 to 67 GHz that provides increased crossover gain compared to previously reported geodesic Luneburg lens antennas. The focal curve of the generalized Luneburg lens can be displaced from the beamformer, allowing for a higher angular resolution in the placement of the feed array along the focal curve. The lens is fed with 21 ridge waveguides with an angular separation of 5.1 degrees, thus providing beam steering in a 102-degree range. The peak realized gain varies from 19 to 21 dBi throughout the steering and frequency ranges and the beam crossover gain is roughly 3 dB below the peak gain. The simulations are experimentally validated.