27 June 2022 in Geophysical Prospecting
20 January 2022 in Geophysical Prospecting
6 July 2022 in Geophysics
Due to the finite acquisition aperture and sampling of seismic data, the Radon transform (RT) suffers from a smearing problem which reduces the resolution of the estimated model. In addition, inverting the RT is typically an ill-posed problem. To address these challenges, a sparse RT mixing the ℓ1 and ℓ2 norms of the RT coefficients in the mixed frequency-time domain is developed, and it is denoted as SRTL1-2. In most conventional sparse RTs, the sparse constraint term often is the ℓ1 norm of the Radon model. We prove that the sparsity effect of the ℓ1-2 minimization is better than that of the ℓ1 norm alone by comparing and analyzing their 2D distribution patterns and threshold functions. The difference of the convex functions algorithm and the alternating direction method of multipliers algorithm are modified by combining the forward and inverse Fourier transforms to solve the corresponding sparse inverse problem in the mixed frequency-time domain. Our method is compared with three RT methods, including a least-squares RT (LSRT), a frequency-domain sparse RT (FSRT), and a time-invariant RT in the mixed frequency-time domain based on an iterative 2D model shrinkage method (SRTIS). Furthermore, we modify the basis function in SRTL1-2 by including an orthogonal polynomial transform to fit the amplitude-variation-with-offset (AVO) signatures found in seismic data, and we denote this as high-order SRTL1-2. Compared to the SRTL1-2, the high-order SRTL1-2 performs better when processing seismic data with AVO signatures. Synthetic and real data examples indicate that our method has better performance than the LSRT, FSRT, and SRTIS in terms of attenuation of multiples, noise mitigation, and computational efficiency.
28 December 2022 in IEEE Geoscience and Remote Sensing Letters
The time-frequency analysis methods are powerful tool in seismic interpretation and bright spot identification. The S-transform (ST), as a hybrid of the short-time Fourier transform and continuous wavelet transform, can achieve progressive time-frequency resolution. However, limited by its linear-frequency-dependent term, the ST obtains a deviated frequency distribution. By removing this term, the frequency form of unscaled S transform (FUST), as a variation of the ST, is proposed to preserve the reliable frequency distribution. The fly in the ointment is that the FUST decreases the temporal resolution of the low frequency components, which may not be suitable for seismic reflection interpretation and reservoir location. In addition, the ST cannot tailor the time-frequency resolution for particular application. To solve these problems, a simple and effective method is proposed by substituting the basis of the FUST. The proposed method can obtain the desired time resolution by adjusting two adjustable parameters. The corresponding inverse transform is also derived to guarantee its energy-conserve and inevitable property. Numerical experiments and real data examples show the better performance of the proposed method in improving temporal resolution and reservoir location over the ST and FUST.
19 August 2021 in Geophysics
Time-lapse (TL) seismic has great potential in monitoring and interpreting time-varying variations in reservoir fluid properties during hydrocarbon exploitation. Obtaining the disparities of reservoir elastic parameters by inversion is essential for TL reservoir monitoring. Conventional TL inversion is carried out by stages without coupling processing and leads to inaccurate results. We directly use the differences in seismic data responses from different vintages, namely, difference inversion, to improve the results’ credibility. It may reduce the deviations of the subtraction of base and monitor inversions in traditional methods. Moreover, most existing studies involving prestack inversion methods use the Zoeppritz equation or its approximants, which failed to consider the wave-propagation effects. We have developed a new TL difference inversion based on the modified reflectivity method (MRM), in which the internal multiples and transmission losses are taken into consideration to fine-tune the characterization of the seismic wave propagating underground. The new method is modified on the basis of the reflectivity method making it feasible in TL difference inversion, and it is derived from the Bayesian theorem. For further delineating the boundaries between layers, the differentiable hyper-Laplacian blocky constraint (DHLBC) is introduced into the prior information of a Bayesian framework, which heightens the sparseness in the vertical gradients of the inversion results and leads to sharp interlayer boundaries of the difference parameters. Synthetic and field data experiments demonstrate that our TL difference inversion method has clear advantages in accuracy and resolution compared with the Zoeppritz method and MRM without DHLBC.
27 September 2024 in IEEE Transactions on Geoscience and Remote Sensing
Quality factor (Q) estimation is critical for the processing of nonstationary seismic data and is an important indicator of oil and gas. Traditional methods for Q value estimation require the identification of the top and bottom of each constant Q layer, which can be challenging in the processing of field seismic data. Deep-learning(DL)-based Q inversion methods leverage the powerful nonlinear fitting capabilities of deep network to automatically obtain interval Q estimates directly from the input seismic data. However, these methods possess so-called ’black box’ characteristics and lack interpretability, thereby limiting their practical application. To address these issues, this study proposes a Physics-Driven Neural Network (PDNN) that integrates physical knowledge with deep neural networks, embedding the frequency-shift method for Q value calculation into the computational layers of the network. Our approach uses nonstationary seismic signals and their corresponding logarithmic time-frequency amplitude spectrum (LTFAS) as input. The neural network decouples the dynamic wavelets and reflection coefficients to obtain the LTFAS of dynamic wavelets. Furthermore, a network layer is designed based on the frequency-shift method to generate the interval Q curve. Experiments on both synthetic and field data demonstrate that the neural network constrained by physical knowledge can alleviate the instability in interval Q calculations, yielding more stable Q estimates. Additionally, this approach enhances the interpretability and generalization capabilities of DL methods, offering significant practical value.