23 February 2015 in Applied Physics Letters
We study light management in a 430 nm-thick GaAs p-i-n single junction solar cell with 10 pairs of InGaAs/GaAsP multiple quantum wells (MQWs). The epitaxial layer transfer on a gold mirror improves light absorption and increases the external quantum efficiency below GaAs bandgap by a factor of four through the excitation of Fabry-Perot resonances. We show a good agreement with optical simulation and achieve around 10% conversion efficiency. We demonstrate numerically that this promising result can be further improved by anti-reflection layers. This study paves the way to very thin MQWs solar cells.
10 June 2024 in Applied Physics Letters
Optimizing the efficiency of optoelectronic devices is challenging at low currents, even with high-quality materials, due to the dominance of non-radiative Shockley–Read–Hall recombination at low carrier densities. In this study, we nearly eliminate the typical non-radiative recombination current in a GaAs/GaInP double-heterojunction light-emitting diode (LED) by shifting the pn-junction 200 nm into the GaInP barrier layer on the n-side. This involves reducing the doping in the n-barrier to below the background p-type doping level to relocate the built-in electric field. As a result, the space charge recombination current with the ideality factor of two is strongly suppressed and remains concealed in our experimental dark current density–voltage measurements. The experimental results, coupled with our physics-based model, indicate the potential for considerable efficiency gains at current densities below ∼ 1 A/cm2. The findings prompt to carefully optimize the doping profiles of high efficiency LEDs and to reconsider the validity of using dark saturation currents as a metric for their performance.
16 July 2019 in Semiconductor Science and Technology
The intermediate-band assisted hot-carrier solar cell (IB-HCSC) concept has been proposed in order to assist the extraction of hot carriers from an absorber that has an intermediate band (IB). In this study, we used a heterostructure based on ten layers of In(Ga)As quantum dots (QDs) embedded in an Al 0.2 Ga 0.8 As single-junction solar cell designed for an intermediate band solar cell (IBSC). QD-IBSCs have proven to be limited by the thermal escape of photo-carriers from QDs at room temperature. In such cases, fundamental improvements in conversion efficiency are only possible if carriers in the IB are not in thermal equilibrium with either conduction or valence bands. Additionally, the IB-HCSC concept provides a high-efficiency limit and enables us to work with all relaxation mechanisms (thermalization, carrier-carrier scattering, and thermal radiation). Under high irradiation, we confirmed the emergence of a hot carrier population in the QDs, limited mostly by thermionic emission, which assists the IBSC by providing a thermoelectric gain in voltage without hindering the possibility of sequential two-photon absorption. Absolute intensity calibrated photoluminescence spectroscopy indicated that the triggering mechanism happens when the QD ensemble is estimated to have a high carrier concentration that behaves as a metal-like IB. Experimental results suggested that the hot carrier effect also occurred in other solar cells based on quantum heterostructures and directions for improvements of hot-carrier assisted QD-IBSCs are proposed for further efficiency gain in optimized device architectures.
16 June 2023 in Physical Review Applied
Alternative types of artificial cooling techniques are of large interest for multiple applications. Here, we develop a framework for studying the role of electro-optical coupling in the analysis of solid-state refrigerators based on electroluminescent cooling (ELC) by combining device measurements with optical simulations. The studied device consists of a light-emitting diode (LED) epitaxially connected to a photodetector (PD) in a double-diode structure (DDS). Previous results of the DDS have indicated that the LED side already operates at conditions corresponding to ELC, but Ohmic losses and imperfect photodetection of the LED light in the PD have prevented observing the effect directly. Here, to break down the detection losses of the DDS, we report on the electro-optical response of the LED and the PD in detail, as well as the role of the spectral coupling from the LED to the PD. We present a detailed framework for combining measurements and simulations of the DDS to gain quantitative insight of the electro-optical response of the LED and PD, as well as the coupling between them, including the analysis of effects that are not directly accessible by standard measurements. The developed approach allows identifying the different photodetection loss mechanisms from the current-voltage and electroluminescence measurements and thereby gives guidance for designs toward a direct demonstration of ELC at practically relevant cooling powers. Somewhat surprisingly, the results show that an imperfect spectral absorption efficiency of the PD, in addition to its below unity quantum efficiency, are together required to explain the previously observed low photodetection efficiency of the DDS even for several microns thick PD structures. In comparison, the LED top mirror introduces only a minuscule drop in photodetection efficiency. Put in plain numbers, our analysis reveals that in the current DDS designs, there is headroom by 14% in the spectral matching between the LED and the PD, 5% in the charge collection efficiency of the PD, and 4% in the efficiency at which photons emitted from the LED reach the PD.
28 April 2026 in Solar Energy Materials and Solar Cells