5 August 2019 in Nature Energy
23 December 2014 in IEEE Journal of Photovoltaics
We report on the fabrication and characterization of ultrathin GaAs solar cells with a silver back mirror and absorber thicknesses of only t = 120 nm and t = 220 nm. The silver back mirror is combined with localized ohmic contacts. Without antireflection coating, Fabry-Perot resonances lead to strong enhancement over single-pass absorption (up to 4), and external quantum efficiency reaches 0.8 at resonance wavelengths. An analytical model is used to determine the resonance wavelengths and the absorption maxima. A short-circuit improvement of 27% results from the enhanced absorption induced by the Fabry-Perot resonances. By implementing an additional antireflection coating, short-circuit currents reach 16.3 mA/cm 2 fort = 120 nm and 20.7 mA/cm 2 for t = 220 nm, corresponding to efficiencies of 8.7 % and 12.9 %, respectively.
23 October 2017 in Nano Letters
2 February 2021 in Physical Review Applied
Doping is a fundamental property of semiconductors and constitutes the basis of modern microelectronic and optoelectronic devices. Their miniaturization requires contactless characterization of doping with nanometer-scale resolution. Here, we use low- and room-temperature cathodoluminescence (CL) measurements to analyze -type and -type thin films over a wide range of carrier densities ( to ). The spectral shift and broadening of CL spectra induced by shallow dopant states and band filling are the signature of doping. We fit the whole spectral lineshapes with the generalized Planck law and refined absorption models to extract the bandgap narrowing and the band tail for both doping types, and the electron Fermi level for doping. This work provides a rigorous method for the quantitative assessment of -type and -type carrier densities using CL. Taking advantage of the high spatial resolution of CL, it can be used to map the doping in nanostructures, and it could be extended to other semiconductor materials.
2 February 2021 in Physical Review Applied
Precise control of doping in single nanowires (NWs) is essential for the development of NW-based devices. Here, we investigate a series of MBE-grown NWs with (-type) and (-type) doping using high-resolution cathodoluminescence (CL) mapping at low and room temperatures. CL spectra are analyzed selectively in different regions of the NWs. Room-temperature luminescence is fitted with the generalized Planck law and an absorption model, and the bandgap and band tail width are extracted. For -doped NWs, the bandgap narrowing provides a quantitative determination of the hole concentration ranging from about to , in good agreement with the targeted doping levels. High-resolution maps of the hole concentration demonstrate the homogeneous doping in the pure zinc-blende segment. For -doped NWs, the electron Fermi level and the full width at half maximum of low-temperature CL spectra are used to assess the electron concentration to approximately to . These findings confirm the difficulty in obtaining highly doped -type NWs, maybe due to doping compensation. Notably, signatures of high concentration [(5–9)] at the very top of NWs are unveiled.
3 May 2019 in Nanotechnology
We report on the structural and optical properties of GaAs 0.7 P 0.3 /GaP core–shell nanowires (NWs) for future photovoltaic applications. The NWs are grown by self-catalyzed molecular beam epitaxy. Scanning transmission electron microscopy (STEM) analyses demonstrate that the GaAsP NW core develops an inverse-tapered shape with a formation of an unintentional GaAsP shell having a lower P content. Without surface passivation, this unintentional shell produces no luminescence because of strong surface recombination. However, passivation of the surface with a GaP shell leads to the appearance of a secondary peak in the luminescence spectrum arising from this unintentional shell. The attribution of the luminescence peaks is confirmed by correlated cathodoluminescence and STEM analyses of the same NW.