11 February 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
As an energy storage technology, supercapacitors feature a high power density. In particular, supercapacitors can be charged or discharged by a relatively large pulse current for a limited period of time. This paper takes advantage of this characteristic and develops a dual-mode fast charger for supercapacitors that employs both continuous and fine-tuned pulse currents. Based on the conventional forward converter, the proposed charger introduces an energy storage capacitor and a branch resistor to tune the rising and falling edges of the pulse current, respectively. Consequently, the transitions between the continuous and pulse current modes are significantly accelerated, which ultimately shortens the supercapacitor charging time. A prototype is built and tested using a 3 V/6 F supercapacitor. To charge the supercapacitor from 2 to 2.5 V, the proposed charger takes 0.87 and 1 s when it is configured to operate in the dual-mode and the continuous current mode only, respectively, which leads to a 13% reduction in the charging time. Moreover, compared to the forward converter, the pulse characteristics of the proposed charger are significantly improved in that the pulse rising and falling times are dramatically reduced: 2.1 versus 147 μs and 7.2 versus 103 μs, respectively.
18 November 1991 in Journal of Physics: Condensed Matter
The mechanism of columnar crystallite orientation in electroless Co-Ni-Mn-P films for perpendicular magnetic recording media was investigated using SEM, TEM and other methods. Micro-region analysis revealed that the Ni and P in the film is mainly distributed in the grain boundary. So it is suggested that the film has a segregated microstructure. The segregation of Ni-P alloy is the main cause which makes the c axis of alpha -Co orient along the film normal and the columnar grain become fine. Magnetic measurements also showed that the films had a good perpendicular property.
16 December 2025 in IEEE Transactions on Power Electronics
Supercapacitors can be charged or discharged by pulse currents with much higher magnitudes compared to the maximum continuous current for limited periods of time. To exploit this characteristic, this article proposes a dual-mode fast charger for supercapacitors that utilizes both continuous and fine-tuned pulse currents by modifying the conventional forward converter. Specifically, the proposed charger introduces two energy storage capacitors to tune the rising and falling edges of the pulse current, respectively. By establishing and maintaining relatively high voltages on the two capacitors, the pulse rising and falling processes are significantly accelerated and the charging time is shortened. To evaluate the proposed charger, a prototype is designed and implemented, which is then used to charge a 12 V/1.5 F supercapacitor moddule from 4 to 8 V. The charging times are 1.68 and 2.04 s when the prototype is configured to operate in the dual-mode and the continuous current mode, respectively. Therefore, the charging time is reduced by 17.6% . Moreover, the pulse characteristics of the proposed charger are significantly improved compared to the conventional forward converter. Specifically, the pulse rising and falling times are dramatically reduced: 4.4 versus 150 $\mu$s and 4.2 versus 100 $\mu$s, respectively.