18 April 2024 in Mechanical Systems and Signal Processing
1 December 2021 in The Journal of the Acoustical Society of America
Spatial characterization of the sound field in a room is a challenging task, as it usually requires a large number of measurement points. This paper presents a probabilistic approach for sound field reconstruction in the modal frequency range for small and medium-sized rooms based on Bayesian inference. A plane wave expansion model is used to decompose the sound field in the examined domain. The posterior distribution for the amplitude of each plane wave is inferred based on a uniform prior distribution with limits based on the maximum sound pressure observed in the measurements. Two different application cases are studied, namely a numerically computed sound field in a non-rectangular two-dimensional (2D) domain and a measured sound field in a horizontal evaluation area of a lightly damped room. The proposed reconstruction method provides an accurate reconstruction for both examined cases. Further, the results of Bayesian inference are compared to the reconstruction with a deterministic compressive sensing framework. The most significant advantage of the Bayesian method over deterministic reconstruction approaches is that it provides a probability distribution of the sound pressure at every reconstruction point, and thus, allows quantifying the uncertainty of the recovered sound field.
11 October 2023 in Mechanical Systems and Signal Processing
4 November 2023 in Journal of Theoretical and Computational Acoustics
1 May 2025 in The Journal of the Acoustical Society of America
Widely used empirical and semi-phenomenological models lack practicality due to unstable predictions, which exhibit poor reproducibility, or reliance on numerous parameters that are not directly measurable. This paper presents an experiment-driven method to simplify the Johnson–Champoux–Allard–Lafarge (JCAL) model using a two-microphone impedance tube. Bayesian inference is applied to determine the non-acoustical parameters (i.e., tortuosity, airflow resistivity, viscous and thermal characteristic lengths, and static thermal permeability), and the regression method is used to correlate porosity with these non-acoustical parameters. The simplified JCAL model is validated against the original model and experimental results for acrylic, silk, and wool fibers. The simplified JCAL model shows good agreement with the original model for acrylic and wool fibers. Both models perform reliably for porosities between 92% and 98%, but show a mismatch with experimental data at 99% porosity, likely due to frame vibration effects. The poroelastic behavior leads to the original and simplified JCAL models failure for silk fiber. This experiment-driven simplification method reduces the JCAL model to a single parameter, porosity, which significantly enhances computational efficiency and enables faster predictions. It also enhances the model's applicability to optimization strategies, such as tuning design parameters for optimal sound absorption while minimizing thickness and mass.
1 April 2023 in The Journal of the Acoustical Society of America
Highly accurate predictions from large-scale numerical simulations are associated with increased computational resources and time expense. Consequently, the data generation process can only be performed for a small sample size, limiting a detailed investigation of the underlying system. The concept of multi-fidelity modeling allows the combination of data from different models of varying costs and complexities. This study introduces a multi-fidelity model for the acoustic design of a vehicle cabin. Therefore, two models with different fidelity levels are used to solve the Helmholtz equation at specified frequencies with the boundary element method. Gaussian processes (GPs) are trained on each fidelity level with the simulation results to predict the unknown system response. In this way, the multi-fidelity model enables an efficient approximation of the frequency sweep for acoustics in the frequency domain. Additionally, the proposed method inherently considers uncertainties due to the data generation process. To demonstrate the effectiveness of our framework, the multifrequency solution is validated with the high-fidelity (HF) solution at each frequency. The results show that the frequency sweep is efficiently approximated by using only a limited number of HF simulations. Thus, these findings indicate that multi-fidelity GPs can be adopted for fast and, simultaneously, accurate predictions.