Chair of Vibro-Acoustics of Vehicles and Machines, Department of Engineering Physics and Computation, TUM School of Engineering and Design, Technical University of Munich 1 , Boltzmannstrasse 15, 85748 Garching
Auto-generated profile, based on publicly available information
Steffen Marburg
Chair of Vibro-Acoustics of Vehicles and Machines, Department of Engineering Physics and Computation, TUM School of Engineering and Design, Technical University of Munich 1 , Boltzmannstrasse 15, 85748 Garching
Spatial characterization of the sound field in a room is a challenging task, as it usually requires a large number of measurement points. This paper presents a probabilistic approach for sound field reconstruction in the modal frequency range for small and medium-sized rooms based on Bayesian inference. A plane wave expansion model is used to decompose the sound field in the examined domain. The posterior distribution for the amplitude of each plane wave is inferred based on a uniform prior distribution with limits based on the maximum sound pressure observed in the measurements. Two different application cases are studied, namely a numerically computed sound field in a non-rectangular two-dimensional (2D) domain and a measured sound field in a horizontal evaluation area of a lightly damped room. The proposed reconstruction method provides an accurate reconstruction for both examined cases. Further, the results of Bayesian inference are compared to the reconstruction with a deterministic compressive sensing framework. The most significant advantage of the Bayesian method over deterministic reconstruction approaches is that it provides a probability distribution of the sound pressure at every reconstruction point, and thus, allows quantifying the uncertainty of the recovered sound field.
9 November 2022 in Advanced Materials Technologies
Noise pollution remains a challenging problem requiring the development of novel systems for noise insulation. Extensive work in the field of acoustic metamaterials has led to various ventilated structures which, however, are usually demonstrated for rather narrow regions of the audible spectrum. In this work, the idea of metamaterial‐based systems is further extended, developing the concept of a metahouse chamber representing a ventilated structure for multiple band noise insulation. Broad stop‐bands originate from strong coupling between pairs of Helmholtz resonators constituting the structure. The averaged transmission −18.6 dB are demonstrated numerically and experimentally within the spectral range from 1500 to 16 500 Hz. The sparseness of the structure together with the possibility to use optically transparent materials suggest that the chamber may be also characterized by partial optical transparency depending on the mutual position of structural elements. The obtained results are promising for development of novel noise‐insulating structures advancing urban science.
Resonant states underpin a variety of metastructures that exhibit remarkable capabilities for the effective control of acoustic waves at subwavelength scales. The development of metamaterials relies on rigorous mode engineering, providing the implementation of the desired properties. At the same time, the application of metamaterials is still limited, as their building blocks are frequently characterized by complicated geometry and cannot be tuned easily. In this work, we consider a simple system of coupled Helmholtz resonators and study their properties associated with the tuning of coupling strength and symmetry breaking. We numerically and experimentally demonstrate the excitation of the quasibound state in the continuum in the resonators placed in free space and in a rectangular cavity. It is also shown that tuning the intrinsic losses via introducing porous inserts can lead to spectral splitting or merging of quasibound states in the continuum and the occurrence of exceptional points. The obtained results open opportunities for the development of simple and easily tunable metastructures based on Helmholtz resonances.
1 September 2020 in The Journal of the Acoustical Society of America
The instability of a floating object is the main factor preventing near-field acoustic levitation (NAFL) from being widely used in the manufacture of micro-electro-mechanical systems. Therefore, investigating the restoring force due to the generation mechanisms of NAFL is necessary to ensure the stable levitation of the floating object. This study presents a theoretical analysis to evaluate the restoring force based on the gas-film-lubrication theory. The gas-film pressure between the reflector and the radiator is expressed in the form of the dimensionless Reynolds equation in a cylindrical coordinate system, which is solved by an eight-point discrete grid method due to the discontinuous gas-film distribution. An experimental rig is constructed to measure the restoring force at various eccentricities, which can be used to support the developed numerical model. The theoretical results show that the restoring force increases with an increment in eccentricity, which agrees with experimental results. Furthermore, theoretical prediction results indicate that the restoring force increases when the amplitude of the radiator and weight of the levitator increases, which indicates higher system stability. The results of the radiator vibration mode on the restoring force show that the restoring force is the largest in the first-order mode.
The recently proposed bianisotropic acoustic metagratings offer promising opportunities for passive acoustic wavefront manipulation, which is of particular interest in flat acoustic lenses and ultrasound imaging at ultra‐high frequency ultrasound. Despite this fact, acoustic metagratings have never been scaled to MHz frequencies that are common in ultrasound imaging. One of the greatest challenges is the production of complex microscopic structures. Owing to two‐photon polymerization, a novel fabrication technique from the view of acoustic metamaterials, it is now possible to precisely manufacture sub‐wavelength structures in this frequency range. However, shrinking in size poses another challenge; the increasing thermoviscous effects lead to a drop in efficiency and a frequency downshift of the transmission peak and must therefore be taken into account in the design. In this work three microacoustic metagrating designs refracting a normally incident wave toward −35° at 2 MHz are proposed. In order to develop meta‐atoms insensitive to thermoviscous effects shape optimization techniques incorporating the linearized Navier–Stokes equations discretized with finite element method are used. The authors report for the first time microscopic acoustic metamaterials manufactured using two‐photon polymerization and, subsequently, experimentally verify their effectiveness using an optical microphone as a detector in a range from 1.8 to 2.2 MHz.