19 April 2023 in POWER ENGINEERING: economics, technique, ecology
Goal. Investigate the existing methods of lighting rooms of various search purposes, make effective decisions on increasing the energy efficiency of electrical engineering systems of internal education through the implementation of automated education management systems and energy-efficient management algorithms, explain the principles of lighting construction using natural lighting and the application of modern technologies of familiar and modern lighting devices. Task. Analysis of existing technical solutions to increase the energy efficiency of the internal lighting system and substantiation of their energy efficiency indicators.Synthesis of the internal lighting control system of the administrative building. Development of algorithms for energy-efficient control of the internal lighting system taking into account external factors. The result of the study. The work is devoted to the analysis of lighting methods and devices used today, as well as the search for effective solutions to increase the energy efficiency of the electrical system of internal lighting due to the implementation of an automated lighting control system and energy-efficient control algorithms, an explanation of the principles of lighting construction using natural lighting and modern application technologies conventional and modern lighting devices, as well as methods of improving lighting efficiency using the latest technologies from existing lighting devices. The main attention is paid to the problems of the currently existing methods of artificial lighting of rooms in houses of various purposes, and to the solution of these problems with the most effective and real methods in practical use. This article may be useful for those interested in upgrading existing lighting or building a new lighting system with efficient use of electricity. Conclusions and practical significance. In this work, an analysis of existing energy-efficient technical solutions in interior lighting systems was carried out, based on the results of which it can be concluded that it is appropriate to use LED lamps in the lighting system due to their excellent indicators of luminous flux, light output, long service life and affordable price. It was also a source of various energy-saving methods in lighting systems, which can be attributed to: the introduction of half-light, LED lights and fluorescent lamps, the installation of electronic start-up control devices, more efficient use of light output, the introduction of a system of automatic lighting regulation depending on external factors and maintaining efficiency. education system.
28 March 2024 in POWER ENGINEERING: economics, technique, ecology
The development of technologies for the construction of digital substations is discussed in the article. The construction of a digital substation provides the following advantages. There are increasing the reliability of the equipment's functioning; reducing the costs of operating the equipment; increasing the efficiency of the use of the main equipment. Modern information technologies and innovative approaches to solving the tasks of automation and management of power facilities, which allow creating new type substations, have been studied. The principle of interaction of digital substation equipment is given. The differences between digital substations and analog substations are shown. The principle of operation of classical and digital substations is presented. The international experience of implementing digital substations is described. Digital substation is one of the basic technologies of Smart Grid. The basis of the construction of a digital substation is the replacement of numerous connections made by wires for the exchange of traditional analog and discrete signals with a unified exchange of digital messages, which provide the possibility of distributed implementation of the functions of the substation automation system and full functional compatibility of intelligent electronic devices of various manufacturers. The concept of "Intelligent" transformer is disclosed. A step-by-step transition to a digital substation is presented. У статті розглянуто питання розвитку технологій будівництва цифрових підстанцій. Досліджено сучасні інформаційні технології та інноваційні підходи до вирішення завдань автоматизації та управління енергооб'єктами, що дозволяють створювати підстанції нового типу. Наведено принцип взаємодії обладнання цифрової підстанції. Показані відмінності йифрових підстанцій та аналогових підстанцій.Представлений принцип роботи класичної та цифрової підстанції. Описаний міжнародний досвід впровадження йифрових підстанцій. Розкрито поняття «Інтелектуальний» трансформатор. Представлений поетапний перехід до цифрової підстанції.
19 April 2023 in POWER ENGINEERING: economics, technique, ecology
The issue of using modern equipment in the construction and modernization of electrical substations is discussed in the article. The current state of electrical substation equipment is analyzed. It is shown that more than half of the equipment has exhausted its technical resource. The percentage of refusals due to aging has increased significantly. Modern trends in design and new concepts of construction and installation of electrical substations are described. The complete-block technology of construction of electrical substations is considered. The experience of substation reconstruction in Europe is presented. ODD, MTS and GIS technologies are compared. The main suppliers of equipment for electrical substations in Ukraine are characterized. Variants of the use of electric and gas equipment are described. Concepts of closed modular construction and "hybrid modules" are given. Gradual changes to the traditional for the unified energy system of Ukraine scheme "two working bus systems with a bypass bus system" are presented, depending on the choice of switching devices. New schematic solutions for substations on desolderings are provided (the RP scheme of the TP supply voltage on desolderings with a jumper on separate equipment; a typical RP scheme of the TP supply voltage on desolderings on integrated power equipment, the RP scheme of the TP supply voltage on desolderings with a jumper on enlarged cells on an integral power equipment). The advantages and disadvantages of the presented schemes are analyzed. On the basis of a complex analysis, conclusions are made about the advantages and disadvantages of the presented schemes and the criteria for choosing one or another scheme and the corresponding equipment are presented.
17 March 2025 in POWER ENGINEERING: economics, technique, ecology
The aim of this article is to review the development of electric road transport and assess its feasibility in European countries based on an analysis of CO₂ emissions using an integral index. Electric road transport is evolving in three main directions: battery-powered vehicles, hydrogen fuel cell vehicles, and road electrification. Battery electric vehicles are widely used, but their future may be constrained by issues related to cost, charging infrastructure, and raw material availability. Hydrogen-powered vehicles offer fast refueling; however, they require substantial investments and strict safety standards. Road electrification includes both contact and wireless energy transfer systems. Contact-based systems, in particular, provide high power and low energy losses, making them optimal for vehicles with significant energy demands. The environmental efficiency of electric vehicles largely depends on the source of electricity. Countries with a high share of renewable energy, such as Norway and France, demonstrate greater environmental efficiency in electric vehicle adoption. Special attention should be given to road electrification, which reduces the duration of battery-powered autonomous driving and allows for smaller battery sizes, thereby extending their lifespan. This approach not only increases battery longevity but also has a positive environmental impact by reducing emissions associated with battery production and disposal.
28 March 2024 in POWER ENGINEERING: economics, technique, ecology
The article deals with maintenance and repair of traction substations. The general problem of improving the maintenance and repair system of traction substations of electrified railways is described. An analysis of methods and means of maintenance and repair of substation equipment was carried out. The causes of malfunctions of the traction substations equipment are analyzed/ The distribution of malfunctions of TP equipment by types of equipment was analyzed. The results of transformer inspections are presented. У статті розглянуто питання технічного обслуговування і ремонту тягових підстанцій. Описана загальна проблема удосконалення системи технічного обслуговування і ремонту тягових підстанцій електрифікованих залізниць. Проведений аналіз методів і засобів технічного обслуговування і ремонту обладнання підстанцій. Проаналізовані причини порушення роботи обладнання ТП та розподіл порушень роботи обладнання ТП за типами устаткування. Наведені результати обстежень трансформаторів.