Multilayer (TiSi)N/CrN coatings were fabricated through vacuum-arc deposition by applying the arc currents of (100 ÷ 110) A on TiSi cathode and (80 ÷ 90) A on Cr cathode, negative bias potential connected to the substrate holder of –(100 ÷ 200) V and reactive gas pressure of (0.03 ÷ 0.6) Pa. Applying a negative bias voltage on substrates enhanced the ion bombardment effect, which affected the chemical compositions, phase state, mechanical and tribological properties of (TiSi)N/CrN coatings. Obtained results indicated that (TiSi)N/CrN coatings with Si content ranging from 0.53 to 1.02 at. % exhibited a high hardness level of (22.1 ÷ 31.1) GPa accompanied with a high Young’s modulus of (209 ÷ 305) GPa, H/E* level of (0.080 ÷ 0.100), H3/E*2 level of (0.15 ÷ 0.33) GPa, and the friction coefficient of 0.35. Values of critical loads at dynamic indentation, changes in friction coefficient and level of acoustic emission signal evidence the high adhesive strength of (TiSi)N/CrN coatings, which allows recommending them to increase cutting tool performance.
8 December 2024 in East European Journal of Physics
Using the TiSiN/MeN (Me = Cr, Nb, W, Mo, TiZr) coatings system as an example, the analyzed results of multilayer coatings with nanolayers of various functional purposes require a systematic approach to understanding the role of selected materials, growth conditions, microstructure, and required properties. Nanoscale grain boundaries, coherent interlayer boundaries, and changes in columnar morphology at the micro level significantly change the physical and mechanical properties of coatings. For all coatings, an increase in mechanical parameters (hardness, modulus of elasticity) is observed due to the formation of a nanoscale phase (which additionally prevents the movement of dislocations together with nanocomposite TiSiN). In addition, there is a mismatch of crystal lattices between layers. Effectively contributes to strengthening due to variable fields of stresses and strains caused by deformations of elastic coherence. Research has determined optimal conditions for the formation of coatings in a wide range of gas (nitrogen) pressure and shear potential, which also allowed for establishing the factors of structural changes and operational characteristics that will be optimal for their industrial use.
Reactive gases such as nitrogen, oxygen, and carbon-based gases (e.g., acetylene) are introduced into the generated plasma flow to create coatings with chemical compounds including nitrides, oxides, and carbides. By managing the rate of gas addition, the stoichiometric composition of the material, which influences its crystal structure and range of properties, can be controlled. In light of this, the vacuum-arc PVD technique was utilised to deposit carbide/nitride multilayer coatings based on W and Nb in a dynamically changing atmosphere of nitrogen and acetylene gases. The two-channel control device – “evaporator-injector” – was employed to control the functions of vacuum-arc evaporators and the gas introduction ports in the vacuum chamber of the installation. The material of the substrates for the deposition of coatings was corrosion-resistant high-temperature steel (grade 12X18H9T). The W (99.97 wt.%) and Nb (98.2 wt.%) cathodes were produced through mechanical boring of ingots made from the respective metals obtained via electron beam re-melting. The present work reports on the deposition strategy of vacuum-arc multilayer WNbN/WNbC, WN/WC, and NbN/NbC coatings with nanometre layer thicknesses and a preliminary assessment of their microstructure. The multilayer systems presented have yet to be studied and hold considerable scientific interest regarding synthesis and experimental investigation.
2 December 2023 in East European Journal of Physics
Two series of multilayer coatings with different numbers of bilayers (268 and 536, respectively) were synthesised using the cathodic vacuum-arc deposition (CVAD) with the simultaneous sputtering of two different cathodes. The first cathode was made of the multicomponent TiZrSiY material, and the second one was made of technical niobium. The coatings were condensed in a nitrogen atmosphere at a constant negative bias potential applied to the substrate. The resulting coatings have a distinct periodic structure composed of individual layers of (TiZrSiY)N and NbN with the thicknesses determined by the deposition interval (10 or 20 s, respectively). The total thicknesses of the coatings determined by the number of bilayers were 11 and 9 microns, respectively. The formation of polycrystalline TiN and NbN phases with grain size comparable to the size of the layers has been identified for both series of coatings. The layers exhibit a columnar structure growth with a predominant orientation (111). The hardness of the experimental coatings depends on the thickness of the layers and reaches 39.7 GPa for the coating with the smallest layer thickness. The friction coefficient of the obtained coatings varies from 0.512 to 0.498 and also depends on the thickness of the layers. A relatively large value of the friction coefficient is due to high roughness and the presence of a droplet fraction on the surface as well as in the volume of the coatings.
This study investigates the structural and compositional evolution of monolayer WNbN and multilayer WNbN/WNbC coatings deposited by the cathodic arc evaporation. The effects of substrate bias voltage (–50 V to –200 V) and cathode arc current (130 – 150 A for W, 110 – 120 A for Nb) were systematically studied to tailor coating morphology, phase formation, and elemental distribution. Cross-sectional microstructural analysis revealed pseudo-multilayer structures within monolayers due to substrate rotation and limited interdiffusion. Increasing bias voltage promoted densification, grain refinement, and improved adhesion, but also enhanced the re-sputtering of nitrogen, affecting stoichiometry and deposition rates. Multilayer coatings showed well-defined alternations between nitride and carbide layers, with morphology and crystallinity strongly influenced by ion energy and metal ion flux. The structural analysis confirmed the dominance of cubic solid solutions based on WNbN and WNbC, with minor hexagonal W2N and Nb2N detected. Grain sizes ranged from 6 to 15 nm, depending on deposition parameters. Optimal structure was achieved at moderate bias (–120 V) and high W arc current, yielding uniform layers, balanced composition, and enhanced crystallinity. The results demonstrate how controlled process parameters enable the design of high-performance nanocomposite coatings with tunable microstructure and phase composition, suitable for protective applications.
4 September 2023 in East European Journal of Physics
The effect of reaction gas (nitrogen) pressure on the structural-phase state and properties of vacuum-arc nitride coatings of (TiZrSiY)N system has been studied. On the surface of the coatings, a significant amount of the droplet fraction and solidified macroparticles of the sputtered cathode is observed, which is typical for vacuum-arc condensates obtained from unseparated plasma flows. In all samples, titanium nitride with a cubic fcc lattice is identified. In the coatingobtained at nitrogen pressures 0.08 Pa and 0.2 Pa, the α-Ti phase was determined, and the measured lattice parameter of this phase suggests that it is a solid solution of nitrogen in titanium. The texture coefficient of the multicomponent coating obtained at the highest nitrogen pressure of 0.55 Pa has the highest value of 5.95 compared to others. The Vickers hardness of multicomponent coatings increases depending on the partial pressure of nitrogen from 25.0 GPa to 36.0 GPa. According to the complex of tribo-mechanical parameters (hardness, elastic modulus, elastic strain to failure, friction coefficient etc.), suggested multicomponent (TiZrSiY)N coatings can be very attractive for tribological applications.