19 August 2013 in Advanced Materials
1 May 2000 in Journal of Applied Physics
The nanostructure and magnetic properties of composite CoPt:C films at room temperature were investigated as a function of annealing temperature, carbon concentration, and film thickness. CoPt:C films with a variety of carbon concentrations were fabricated by cosputtering Co, Pt, and C onto water-cooled Si(100) substrates followed by annealing. X-ray diffraction and transmission electron microscopy analyses indicate that nanocrystallites of face-centered-tetragonal (fct) CoPt phase, which has a uniaxial magnetocrystalline anisotropy constant of about 5×107 erg/cm3, can be formed in carbon matrix when the annealing temperature is higher than 600 °C. The grain sizes of the fct CoPt crystallites are about 10 nm and the coercivities can be as high as 12 kOe. Higher annealing temperature and lower carbon concentration generally lead to larger grain sizes and perhaps more complete formation of the fct CoPt phase, and therefore higher coercivities. The coercivity is insensitive to the film thickness until the thickness is smaller than the CoPt grain size, when the coercivity starts to decrease with film thickness. The magnetic activation volumes are typically around 1×10−18 cm3. The nanostructure and the associated magnetic properties of these composite CoPt:C films are promising as potential media for extremely high-density recording.
19 May 2005 in Applied Physics Letters
We report the magnetic properties of Cr-doped AlN thin films grown by reactive magnetron sputtering under various nitrogen pressures. Ferromagnetism is observed up to the highest temperature measured, 400 K, and shows strong dependence on the Cr concentration and, especially, the nitrogen growth pressure. By varying the nitrogen pressure during film growth, the magnetic properties of the films can be changed while keeping a constant Cr concentration. The ferromagnetism is enhanced in the films that were grown at low nitrogen pressures and thus nitrogen deficient, suggesting an important role of defects in the ferromagnetism of this material.
2 September 2014 in Scientific Reports
Nanoscience has been one of the outstanding driving forces in technology recently, arguably more so in magnetism than in any other branch of science and technology. Due to nanoscale bit size, a single computer hard disk is now able to store the text of 3,000,000 average-size books and today's high-performance permanent magnets—found in hybrid cars, wind turbines and disk drives—are nanostructured to a large degree. The nanostructures ideally are designed from Co- and Fe-rich building blocks without critical rare-earth elements and often are required to exhibit high coercivity and magnetization at elevated temperatures of typically up to 180 °C for many important permanent-magnet applications. Here we achieve this goal in exchange-coupled hard-soft composite films by effective nanostructuring of high-anisotropy HfCo7nanoparticles with a high-magnetization Fe65Co35phase. An analysis based on a model structure shows that the soft-phase addition improves the performance of the hard-magnetic material by mitigating Brown's paradox in magnetism, a substantial reduction of coercivity from the anisotropy field. The nanostructures exhibit a high room-temperature energy product of about 20.3 MGOe (161.5 kJ/m3), which is a record for a rare earth- or Pt-free magnetic material and retain values as high as 17.1 MGOe (136.1 kJ/m3) at 180°C.
6 February 2020 in Physical Review Letters
Magnets with chiral crystal structures and helical spin structures have recently attracted much attention as potential spin-electronics materials, but their relatively low magnetic-ordering temperatures are a disadvantage. While cobalt has long been recognized as an element that promotes high-temperature magnetic ordering, most Co-rich alloys are achiral and exhibit collinear rather than helimagnetic order. Crystallographically, the B20-ordered compound CoSi is an exception due to its chiral structure, but it does not exhibit any kind of magnetic order. Here, we use nonequilibrium processing to produce B20-ordered with a maximum Co solubility of . Above a critical excess-Co content (), the alloys are magnetically ordered, and for , a critical temperature is obtained, the highest among all B20-type magnets. The crystal structure of the alloy supports spin spirals caused by Dzyaloshinskii-Moriya interactions, and from magnetic measurements we estimate that the spirals have a periodicity of about 17 nm. Our density-functional calculations explain the combination of high magnetic-ordering temperature and short periodicity in terms of a quantum phase transition where excess-cobalt spins are coupled through the host matrix.
24 July 2014 in Nanoscale
We report a facile synthesis of hard magnetic L10-FePtAu nanoparticles by coreduction of Fe(acac)3, Pt(acac)2 (acac = acetylacetonate) and gold acetate in oleylamine.