29 October 2021 in Science Advances
Flexible artificial synapses are fabricated with a SIZO/ion gel hybrid structure forming a polyimide substrate.
1 January 2019 in IEEE Transactions on Electron Devices
Amorphous oxide-based thin-film logic circuits have been fabricated using only an n-type amorphous silicon–zinc–tin–oxide (a-SZTO) channel layer with different source/drain electrodes. Enhancement-mode thin-film transistors (TFTs) were fabricated with oxide electrodes. Depletion-mode TFTs were fabricated with metal electrode. Work functions were measured by Kelvin probemicroscopy. The barrier heights ( $\Phi _{\textsf {B}}$ ) between the a-SZTO channel layer and the electrode were measured to be 1.831, 2.341, and 2.339 eV for the Ti/Al electrode, Indium–silicon–oxide (ISO) electrode, and indium–tin–oxide (ITO) electrode, respectively. The physicalmechanism on the variation of sheet and contact resistances was investigated using a transmission line method, and the change in the resistances is closely related to $\Phi _{\textsf {B}}$ . Inverters were fabricated, with different $V_{\textsf {TH}}$ values adopted simply by using different contact characteristics between various electrodes and the semiconductor channel. High values of voltage gains in inverters were obtained: 12.33 (ISO) and 11.75 (ITO) at $V_{\textsf {DD}}= 5$ V. Itwas also confirmed that more complicated n-type-based NAND and NOR thin-film circuits, implementedwith different electrodes, functioned as conventional logic circuits. This simple fabrication method of thin-film logic circuits opens the possibility of implementing next-generation stacked integrated circuit technology.
1 January 2021 in IEEE Journal of the Electron Devices Society
Oxide semiconductors are of particular interest in the field of integrated electronics due to their large-area fabrication, high uniformity, and superior performance. Here, we report an exceptionally sensitive photo-induced inverter device with high linearity based on the unipolar n-type channel material amorphous silicon indium zinc oxide (a-SIZO). The field-effect transistor (FET) based on a-SIZO exhibits maximum mobility of 9.8 cm 2 /Vs at $\text{V}_{\mathrm{ D}}$ of 5 V, high on/off ratio of $\sim 10^{6}$ , and stable threshold voltage ( $\text{V}_{\mathrm{ Th}}$ ) of −0.35 V. Additionally, the optical properties of the proposed FET include excellent $\text{V}_{\mathrm{ Th}}$ shift and photocurrent ( $\text{I}_{\mathrm{ photo}}$ ) with high linearity under various red-light illumination. The proposed enhancement-load type inverter device shows reliable electrical and optical characteristics with an inverter gain of 0.7 at $\text{V}_{\mathrm{ DD}}$ of 1 V and linear photo-response in terms of inverter gain and voltage shift, demonstrating promising potential in the field of integrated electronics for optoelectronic applications.
1 January 2022 in SSRN Electronic Journal
The effect of Si doping in the presence of excess oxygen on the zinc-tin-oxide (ZTO) thin-film transistor is investigated. The threshold voltage increases from 3.86 to 10.8 V, and the ON current reduces from 4 × 10 -4 to 1.1 × 10 -4 A for the undoped and 1 wt% Si-doped ZTO transistor, respectively. The changes in the threshold voltage and the ON current are attributed to the suppression of free charge carriers due to excess oxygen in the film. The annihilation of oxygen vacancy-related defects states is substantiated by the density of states extracted from the photonic capacitance-voltage characteristic of the undoped and Si-doped ZTO thin-film transistors. Moreover, due to the high binding energy of Si and oxygen, excess oxygen is introduced into the film. The excessive oxygen forms the O-O ex dimer that acts as the electron trap and degrades the device's stability. From the bias stress measurement and the density of states extraction, it is concluded that 0.5 wt% doping of Si in ZTO is optimal for moderate device performance, less defects density, and high stability.