We propose Inkjet 4D Print, a self-folding fabrication method of 3D origami tessellations by printing 2D patterns on both sides of a heat-shrinkable base sheet, using a commercialized inkjet ultraviolet (UV) printer. Compared to the previous folding-based 4D printing approach using fused deposition modeling (FDM) 3D printers [An et al. 2018], our method has merits in (1) more than 1200 times higher resolution in terms of the number of self-foldable facets, (2) 2.8 times faster printing speed, and (3) optional full-color decoration. This paper describes the material selection, the folding mechanism, the heating condition, and the printing patterns to self-fold both known and freeform tessellations. We also evaluated the self-folding resolution, the printing and transformation speed, and the shape accuracy of our method. Finally, we demonstrated applications enabled by our self-foldable tessellated objects.
31 August 2023 in ACM Transactions on Computer-Human Interaction
Despite the recent trend of computational origami for human-computer interaction (HCI) and digital fabrication, it is still difficult for designers to complete a series of design, simulation, and fabrication of objects leveraging computational origami theory. In this paper, we propose Crane, an integrated origami design platform implemented with Grasshopper. With this platform, users can seamlessly (1) design the 2D and 3D crease pattern, (2) simulate 3D folding transformation from the given crease pattern, (3) inversely find a new pattern under design constraints, (4) thicken the 2D pattern into a 3D volume along with the appropriate hinge structures for different fabrication methods, and (5) optionally connect the resulting design to other Rhinoceros or Grasshopper plugins for post-processes. To help understand how to use our system and demonstrate its feasibility, we showed three examples of origami products designed using our system. We also reported user feedback from the workshop as an evaluation.
A self-folding method that can fold a thick (~10 μm) metal layer with a large curvature (>1 mm−1) and is resistant to repetitive folding deformation is proposed. Given the successful usage of hinged origami/kirigami structures forms in deployable structures, they show strong potential for application in stretchable electronic devices. There are, however, two key difficulties in applying origami/kirigami methods to stretchable electronic devices. The first is that a thick metal layer used as the conductive layer of electronic devices is too hard for self-folding as it is. Secondly, a thick metal layer breaks on repetitive folding deformation at a large curvature. To overcome these difficulties, this paper proposes a self-folding method using hinges on a thick metal layer by applying a meander structure. Such a structure can be folded at a large curvature even by weak driving forces (such as those produced by self-folding) and has mechanical resistance to repetitive folding deformation due to the local torsional deformation of the meander structure. To verify the method, the large curvature self-folding of thick metal layers and their mechanical resistance to repetitive folding deformation is experimentally demonstrated. In addition, an origami/kirigami hybrid stretchable electronic device with light-emitting diodes (LEDs) is fabricated using a double-tiling structure called the perforated extruded Miura-ori.