Donghyun Han

Donghyun Han

Auto-generated profile, based on publicly available information

Donghyun Han

Computer Systems Reliable SOC Laboratory, Department of Electrical and Electronic Engineering, Yonsei University, Seoul, South Korea

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2021 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Verified
Journal Article
Closed access
SPSangmin Park
Sangmin Park
MCMinho Cheong
Minho Cheong
DHDonghyun Han
Donghyun Han
SKSungho Kang
Sungho Kang
Three-dimensional integrated circuits (3-D ICs) utilizing through-silicon via (TSV) technology have many advantages over 2-D ICs, including high bandwidth, high density, and low power consumption. However, TSV, which is a key feature of 3-D ICs, has not only problems due to defects in the manufacturing process but also potential problems due to aging. Various solutions have been proposed to address each of these issues, but no one solution has been proposed considering both. In practice, to improve the overall reliability of the TSV, the two problems should be solved together, not separately. In this article, a new TSV architecture is proposed to cope with both issues. The proposed TSV architecture uses redundant TSVs (RTSVs) to repair faulty TSVs due to manufacturing defects and uses unused RTSVs in this way to solve the aging-related problems. Experimental results show that the proposed architecture achieves similar repair rate with less than 1% difference in less than six clustered faults using smaller hardware overhead, and also shows that unused RTSVs are available with a 98.5% high probability, resulting in a 1.5 times improvement in lifetime.

1 March 2023 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
YLYoungkwang Lee
Youngkwang Lee
DHDonghyun Han
Donghyun Han
SKSungho Kang
Sungho Kang
High-bandwidth memory (HBM) is the latest 3-D-stacked dynamic random access memory (DRAM) standard adopted in Joint Electron Device Engineering Council (JEDEC). It has many advantages, such as high bandwidth, large capacity, and low power consumption, but mass production is challenging due to its low yield and reliability. One of the reasons is that through-silicon-vias (TSVs) are prone to defects. Therefore, HBM requires a TSV built-in self-repair (TBISR) architecture that can repair the TSV at a high repair rate even after chip shipment; however, implementing it through existing TSV repair architectures is difficult. They have a large area overhead or a low repair rate. In addition, they lack consideration for bidirectional TSV repair. To address these issues, this article proposes a novel TBISR architecture that can repair bidirectional TSVs and has a small area overhead and a high repair rate. Experimental results show that the proposed architecture, capable of bidirectional TSV repair, has a high repair rate, despite the small size compared to other architectures.

24 May 2021 in IEEE Access
Verified
Journal Article
Open access
DHDonghyun Han
Donghyun Han
HLHayoung Lee
Hayoung Lee
SKSungho Kang
Sungho Kang
The memory cell density and memory capacity have been increased for obtaining larger and faster memory. However, this threatens the memory reliability by increasing the probability of faulty cell generation. In this paper, a fast and small-area built-in redundancy analysis (RA) for the post-bond repair process in 3D memory is proposed. Spare line allocation is the structure for memory repair which the most widely used. However, the spare line structure that replaces the entire line which contains faults in each memory layer occurs inefficiency in repairing a small number of faults, including single faults, and it is difficult to share spares between layers. The proposed idea is to use spare line to repair line faults according to the characteristics of it, and to complement the structural limitations by proposing a new redundant spare. This is base common spare located on the base die, and it can be shared across all layers. The proposed BIRA improves the efficiency of spare lines with two complementary spare resource structures, achieving a short repair time and high repair rate. The proposed BIRA achieves 100% repair rate when there are at least 2 times more faults than the previous works with the same hardware overhead. In addition, it takes only at most 80% of the analysis time compared to the previous works, and as the number of faults increases, the analysis time reduction becomes greater compared to the previous works.

3 September 2021 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Verified
Journal Article
Closed access
HKHogyeong Kim
Hogyeong Kim
HLHayoung Lee
Hayoung Lee
DHDonghyun Han
Donghyun Han
SKSungho Kang
Sungho Kang
With technological advancements, the density and capacity of memory are rapidly increasing. As the number of memory cells increases, the difficulty of fault analysis and the number of faults also increase. Hence, the yield and test cost of memory have become essential issues in memory manufacturing. Many manufacturers have used redundancy analysis (RA) to improve the memory yield and decrease the test cost. However, most conventional RA methods require a lengthy analysis time to find a repair solution, and it is difficult to obtain an optimal repair rate with conventional RA algorithms. Although several algorithms using various spare structures to achieve performance improvement have been proposed, those improvements have not been ground breaking. In this article, a new multibank optimized RA (MORA) algorithm is proposed. It achieves a very high repair rate and a drastic reduction in the analysis time compared with conventional RA algorithms using various spare structures. During testing, the proposed algorithm stores the faulty cell information efficiently. Therefore, the analysis time can be shortened through the presolution process of the repair analysis using the proposed fault storage spaces. Additionally, the proposed spare structures are used to increase the repair rate. The experimental results reveal that the proposed algorithm can achieve a very high repair rate at a faster speed than conventional RA algorithms.

2 May 2022 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Verified
Journal Article
Closed access
YLYoungkwang Lee
Youngkwang Lee
DHDonghyun Han
Donghyun Han
SLSooryeong Lee
Sooryeong Lee
SKSungho Kang
Sungho Kang
A voltage-divider-based through-silicon-via (TSV) test architecture tests the TSV by using the voltage value differently divided according to TSV defects. This architecture is widely used for TSV testing owing to its small hardware overhead and high test speed. However, the existing voltage-divider-based TSV test architectures are vulnerable to process–voltage–temperature (PVT) variations and noise. In addition, they cannot effectively detect pinhole defects. This study proposes a novel error-tolerant voltage-divider-based TSV test architecture to address these problems. The proposed architecture reduces the test errors by appropriately adjusting the on-resistance value of each MOSFET and adding a compensator circuit. In addition, it effectively detects the pinhole defects by modifying the voltage divider structure and changing the MOSFET control method. Experimental results reveal that the proposed architecture promptly tests various TSV defects and significantly reduces the test errors.

7 August 2024 in IEEE Transactions on Reliability
Verified
Journal Article
Closed access
DHDonghyun Han
Donghyun Han
DWDuyeon Won
Duyeon Won
SKSunghoon Kim
Sunghoon Kim
SKSungho Kang
Sungho Kang
High-bandwidth memory (HBM) is one of the 3-D stacked memory standards that demonstrate high performance, including high bandwidth, large capacity, and low power consumption. However, despite these advantages, issues related to reliability and yield have imposed limitations on mass production. Various methodologies to enhance the reliability of HBM have been proposed, such as built-in self-repair (BISR) architectures and error correction code algorithms. Nevertheless, ensuring the reliability of through-silicon vias (TSV) remains a challenging problem. Existing built-in architectures aiming to enhance TSV reliability often incur significant hardware overhead, limiting practical applications. In this article, an innovative TSV BISR architecture that can detect and repair permanent TSV faults in real time at the user stage is proposed. The proposed architecture significantly enhances the reliability of HBM while implementing it with minimal hardware overhead. Furthermore, it effectively identifies both temporary errors and permanent TSV faults, enabling efficient TSV repairs. Through fast and accurate TSV fault repair, the proposed architecture substantially improves the reliability of HBM.