Abebe Teklu Woldegiorgis

Abebe Teklu Woldegiorgis

Auto-generated profile, based on publicly available information

Abebe Teklu Woldegiorgis

African Railway Engineering Center, Addis Ababa Institute of Technology, Addis Ababa University, Addis Ababa, Ethiopia

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2022 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
YZYun Zuo
Yun Zuo
XGXinglai Ge
Xinglai Ge
YZYuelei Zheng
Yuelei Zheng
YCYuexuan Chen
Yuexuan Chen
HWHuimin Wang
Huimin Wang
AWAbebe Teklu Woldegiorgis
Abebe Teklu Woldegiorgis
Speed-sensorless control of induction motor drives based on the extended state observer (ESO) attracts much popularity due to its key characteristics, e.g., satisfactory estimation performance, and high robustness against disturbances. However, the conventional ESO generally uses fixed high gains to achieve fast convergence. This may bring about the concern of noise sensitivity. Moreover, a proportional-integral (PI)-type speed controller is mostly adopted in speed-sensorless control of induction motor drives, which may cause unsatisfactory system dynamics. To address these, an adaptive active disturbance rejection control (ADRC) strategy is proposed for speed-sensorless induction motor drives in this article. In this scheme, a third-order adaptive ESO (AESO) is first used to estimate the speed, the phase, and the overall disturbance. Then, a speed controller based on the state error feedback control rate (SEFCR) is designed to improve system dynamics. In practice, disturbances like dc offsets may further challenge estimation performance, and hence, a closed-loop flux observer (CLFO) is employed to deal with this issue. Additionally, a parameter sensitivity analysis of the CLFO is also provided to evaluate the performance of the proposed scheme. Finally, extensive experimental tests have been carried out to validate the effectiveness of the proposed.

7 March 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
AWAbebe Teklu Woldegiorgis
Abebe Teklu Woldegiorgis
XGXinglai Ge
Xinglai Ge
HWHuimin Wang
Huimin Wang
YZYun Zuo
Yun Zuo
Active flux model of permanent magnet synchronous motors simplifies the model and eases sensorless control implementation. However, incorporating the current model (CM) that depends on the estimated electrical position for active flux estimation may cause performance degradation. The conventional active flux observer analysis revealed that position error influences sensorless control performance, especially during transient conditions. Thus, two improvement strategies named method-1 and method-2 are proposed in this article. Method-1 is based on an adaptive gain observer-based approach designed to discard the effect of position error. The observer gains are dependent on the estimated reference frame currents, which leads to the observer complexity. Method-2, on the other hand, uses the position error from the estimated active flux to obtain the true CM active flux without changing the conventional observer gains. Thus, the effect of position error on active flux estimation is discarded. Method-1 and method-2 fully decoupled the speed-position identification and the active flux observer. Meanwhile, a feedforward compensated phase-locked loop is adopted for speed-position identification. The proposed sensorless control strategies have been extensively validated using the Texas digital signal processor (TMS320F28335) and RT-LAB real-time simulator. The experimental results indicated that the proposed methods improved the sensorless control and active flux estimation performance.

31 December 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
AWAbebe Teklu Woldegiorgis
Abebe Teklu Woldegiorgis
XGXinglai Ge
Xinglai Ge
HWHuimin Wang
Huimin Wang
MHMANNAN HASSAN
MANNAN HASSAN
In this article, a new frequency adaptive second-order disturbance observer (FASODO) for back electromotive force (EMF) and active flux estimation is proposed using the active flux model of interior permanent magnet synchronous motors. FASODO is a frequency adaptive approach and eliminates the phase delay compensator demand of the traditional sliding mode observer-based back EMF estimator. Besides, FASODO estimates the active flux and the back EMF simultaneously. As a result, a quadrature phase-locked loop (Q-PLL) using either the back EMF or the active flux and a tan inverse approach can be used for speed-position identification. Meanwhile, an integrally compensated Q-PLL is designed to overcome the traditional Q-PLL position estimation error during ramp frequency tracking. The design guideline of FASODO and the integrally compensated Q-PLL are provided. A comparative analysis with traditional SMO shows that the proposed approach can deliver a better sensorless control performance. Furthermore, a comparison with a frequency adaptive complex coefficient filter enhanced SMO shows a comparable result, while the proposed approach additionally delivers the active flux. The approach is verified using the Texas Digital Signal Processor (TMS320F28335) and RT-LAB Real-Time Simulator, taking into account different operating conditions.

1 December 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
AWAbebe Teklu Woldegiorgis
Abebe Teklu Woldegiorgis
XGXinglai Ge
Xinglai Ge
YZYun Zuo
Yun Zuo
HWHuimin Wang
Huimin Wang
MHMANNAN HASSAN
MANNAN HASSAN
Extended sliding mode disturbance observer-based current observer for interior permanent magnet synchronous motors (IPMSM) is an efficient method, where the estimated dq -axis disturbances are linearly dependent on the position estimation error. Thus, this article proposed a robust speed-position identification strategy using the estimated disturbances. First, an analysis of the estimated disturbances concerning parameter variation, position estimation error, and the effect on the sensorless control performance is given. Then, a combined method that uses the dq -axis disturbances is proposed for speed-position identification. The proposed method is robust against stator resistance variation without estimating the stator resistance. However, the flux linkage variation effect sustains per the external load. Therefore, the permanent flux linkage variation electromotive force (EMF) compensator is included. The compensator is activated in the medium to the high-speed range while deactivated in the low-speed area. Thus, the advantage of the combined method for the low-speed area against resistance variation is kept. Various hardware-in-the-loop experimental studies and comparative analysis show that the proposed method with a permanent flux linkage variation back EMF compensator achieved an excellent sensorless control performance for IPMSM.

3 December 2019 in IEEE Access
Verified
Journal Article
Open access
AWAbebe Teklu Woldegiorgis
Abebe Teklu Woldegiorgis
XGXinglai Ge
Xinglai Ge
SLSongtao Li
Songtao Li
MHMANNAN HASSAN
MANNAN HASSAN
The sliding mode observer (SMO)-based approach known for its robustness towards parameter variation (external disturbance) has been used for the sensorless motor drive system. Delay compensation is commonly added to overcome the phased delay resulted from the introduction of the low-pass filter for chattering suppression. In this paper, a new extended sliding mode disturbance observer (ESMDO)-based sensorless control of interior permanent magnet synchronous motor for the medium and high-speed range is presented. The effect of parameter variation and coordinate transformation is considered as a lumped disturbance, and ESMDO is designed to compensate for the imminent impact of such scenarios. A Lyapunov stability theory is adopted to guarantee the stability of the proposed ESMDO-based sensorless control method. The ESMDO has an inbuilt low-pass filter and does not introduce a phased delay. A very large load change/reference speed variation may result in system instability or require higher controller gains that lead to system chattering. Hence, a PI-based compensation is incorporated to achieve a smooth and robust sensorless control algorithm considering the d-axis disturbance. Finally, extensive simulation and hardware-in-the-loop (HIL) test using the TMS320F28335 control unit in a real-time environment are conducted to verify the effectiveness of the proposed sensorless control method.

4 May 2021 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
AWAbebe Teklu Woldegiorgis
Abebe Teklu Woldegiorgis
XGXinglai Ge
Xinglai Ge
SLSongtao Li
Songtao Li
YZYun Zuo
Yun Zuo
A pulsating high-frequency signal injection-based low-speed sensorless control of interior permanent magnet synchronous motor (IPMSM) using a conventional stationary reference frame low-pass filter (LPF) may experience a phase delay. Similarly, the heterodyning process may exhibit time delay and bandwidth restriction. Thus, an improved approach with a single high-pass filter in a stationary reference frame is proposed. The rotor position error is extracted from the high-frequency current using the sign of sine of the injected signal considering the phase shift. Consequently, the estimated reference frame LPF in the heterodyning process and the delay compensator for a stationary reference frame LPF-based approach are discarded. A phase-shift tracking observer (PSTO) independent of position error is included. Meanwhile, an online d-axis high-frequency current amplitude estimation is adopted to normalize the effect of d-axis inductance variation. The comparative study with a stationary reference frame LPF and the heterodyning process has shown that the proposed self-sensing strategy delivers an excellent speed sensorless control performance. Thanks to the online d-axis current amplitude estimation, the impact of d-axis inductance variation on speed-position identification has been improved. The proposed self-sensing strategy has been validated using MATLAB simulation and Hardware-in-the-loop (HIL) with TMS320F28335 digital signal processor considering rail transit applications.