Michael McVay

Michael McVay

Auto-generated profile, based on publicly available information

Michael McVay

Professor, Dept. of Civil and Coastal Engineering, Univ. of Florida, 365 Weil Hall, Gainesville, FL 32611

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2013 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
STSudheesh Thiyyakkandi
Sudheesh Thiyyakkandi
MMMichael McVay
Michael McVay
DBDavid Bloomquist
David Bloomquist
PLPeter Lai
Peter Lai
With increased urbanization, deep foundation (bridges, signage, walls, etc.) selection is moving toward the minimization of disturbance and installation time, as well as addressing quality control and assurance issues. Unfortunately, many types of deep foundations involve noise and vibration during installation (e.g., driven piles) or integrity and reduced resistance issues (e.g., drilled shafts, both conventional and post grouted tip, continuous flight auger piles). This paper presents a new foundation type, a jetted and grouted precast pile, which uses the advantages of several proven deep foundation installation techniques. The installation of the new pile is comprised of three distinct phases: (1) pressurized water-jetting of a precast pile into the ground; (2) side grouting of the pile; and (3) tip grouting. The pile has two separate side grouting zones, each with its own grout delivery system. Each grout zone is covered with a semirigid membrane, which results in radial expansion of the soil...

1 April 2006 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
ZHZhihong Hu
Zhihong Hu
MMMichael McVay
Michael McVay
DBDavid Bloomquist
David Bloomquist
RHRodrigo Herrera
Rodrigo Herrera
PLPeter Lai
Peter Lai
As a result of recent changes in the requirements involving hurricane extreme events (e.g., wind velocities), the Florida Department of Transportation has moved away from cable-stayed signs, signals, and lights systems to mast arm/pole structures. Unfortunately, the newer systems develop significant lateral and torque loading on their foundations (e.g., drilled shafts). Current design practice for a mast arm/pole foundation is to treat lateral loading and torsion separately (i.e., uncoupled); however, recent field-testing suggests otherwise. This paper reports on the results of 91 centrifuge tests. 54 of the tests were conducted in dry sand and 37, in saturated sands. The tests varied the lateral load to torque ratios, shaft embedment depths, and soil strengths. The experiments revealed that even though the torsional resistances of the shafts were not influenced by lateral load, the shafts’ lateral resistance was significantly impacted by torsion. Reductions in lateral resistance of 50% were recorded for ...

1 January 2009 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
MMMichael C. McVay
Michael C. McVay
SWScott J. Wasman
Scott J. Wasman
GCGary R. Consolazio
Gary R. Consolazio
PBPaul J. Bullock
Paul J. Bullock
DCDavid G. Cowan
David G. Cowan
HBHenry T. Bollmann
Henry T. Bollmann
The paper describes the in situ investigation, site stratigraphy, field monitoring, data reduction, and subsequent time-domain analysis of soil–structure interaction from a full scale vessel impact loading of a bridge pier at the St. George Island Causeway. The in situ investigation included standard penetration testing, electric cone, dilatometer, and pressuremeter testing to identify soil stratigraphy, engineering properties (strength and moduli), and axial and lateral static pile resistance (T–z , and P–y ). Field instrumentation included soil total stress and pore pressure gauges in front of and behind the pile cap, a fully instrumented pile (strain gauges along length), dynamic load cells to monitor barge impact loads, and accelerometers to monitor pier accelerations, velocities, and displacements. Analyses of the field data reveal significant dynamic forces within the soil–structure system as a result of the duration and magnitude of the loading. Inertia from the piers, cap, and piles provide significant resistance in the early portion of the impact. However, postpeak inertia (i.e., pier deceleration) resulted in maximum deformations of the pier. Soil damping provided most of the resisting force at the peak barge loading, whereas static soil resistance dominated at the peak lateral displacement. Time-domain finite element analysis of an impact event employing viscous soil dashpots, nonlinear P–y and T–z springs with nonlinear beam, and shell elements for the pier, cap, and piles resulted in reasonable load displacement predictions.

1 May 2016 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
TNTrung Dung Nguyen
Trung Dung Nguyen
KTKhiem Tran
Khiem Tran
MMMichael McVay
Michael McVay
An application of two-dimensional (2D) time-domain full waveform tomography is presented to evaluate existing foundations using surface-based seismic wave fields. The full waveform inversion (FWI) technique is based on a finite-difference solution of 2D elastic wave equations and the Gauss–Newton inversion method. Both compression-wave (P-wave) and shear-wave (S-wave) velocities are inverted independently and simultaneously to increase the credibility of characterized profiles. The FWI technique was applied on both synthetic and real experimental data sets. Inverted results of synthetic data revealed that individual embedded foundation elements (piles) and soil between piles were distinguished. For real experimental data, seismic surface wave fields were measured next to two drilled shafts with a 1.2-m diameter and a 15-m length and then inverted by the FWI technique. The waveform analysis successfully profiled embedded shaft elements and subsurface soil stratigraphy, and shaft lengths of 15 m we...

18 March 2020 in Geophysics
Verified
Journal Article
Closed access
MMMajid Mirzanejad
Majid Mirzanejad
KTKhiem Tran
Khiem Tran
MMMichael McVay
Michael McVay
DHDavid Horhota
David Horhota
SWScott Wasman
Scott Wasman
Sinkhole collapse may result in significant property damage and even loss of life. Early detection of sinkhole attributes (buried voids, raveling zones) is critical to limit the cost of remediation. One of the most promising ways to obtain subsurface imaging is 3D seismic full-waveform inversion. For demonstration, a recently developed 3D Gauss-Newton full-waveform inversion (3D GN-FWI) method is used to detect buried voids, raveling soils, and characterize variable subsurface soil/rock layering. It is based on a finite-difference solution of 3D elastic wave equations and Gauss-Newton optimization. The method is tested first on a data set constructed from the numerical simulation of a challenging synthetic model and subsequently on field data collected from two separate test sites in Florida. For the field tests, receivers and sources are placed in uniform 2D surface grids to acquire the seismic wavefields, which then are inverted to extract the 3D subsurface velocity structures. The inverted synthetic results suggest that the approach is viable for detecting voids and characterizing layering. The field seismic results reveal that the 3D waveform analysis identified a known manmade void (plastic culvert), unknown natural voids, raveling, as well as laterally variable soil/rock layering including rock pinnacles. The results are confirmed later by standard penetration tests, including depth to bedrock, two buried voids, and a raveling soil zone. Our study provides insight into the application of the 3D seismic FWI technique as a powerful tool in detecting shallow voids and other localized subsurface features.

1 August 2010 in Journal of Geotechnical and Geoenvironmental Engineering
Verified
Journal Article
Closed access
HKHarald Klammler
Harald Klammler
MMMichael McVay
Michael McVay
DHDavid Horhota
David Horhota
PLPeter Lai
Peter Lai
Load and resistance factor design (LRFD) is a method that aims at meeting specified target reliabilities (probabilities of failure) of engineered systems. The present work focuses on ultimate side friction resistance for axial loads on single cylindrical drilled shaft foundations in the presence of spatially variable rock/soil strength. Core sample data are assumed to provide reliable information about local strength in terms of mean, coefficient of variation and spatial correlation structure (variogram) at a site. The geostatistical principle of support up-scaling is applied to quantify the reduction in variability between local strength and the average ultimate shaft side friction resistance without having to recur to lengthy stochastic finite difference/element simulations. Site and shaft specific LRFD resistance factors ( Φ values) are given based on the assumption of lognormal load and resistance distributions and existing formulas recommended by the Federal Highway Administration. Results are effici...