2 October 2018 in Water Resources Research
Urban and land use planning is conditioned by flood risk analyses and is a great research challenge. While methods are available for quantitative hazard and risk modeling, there is still a major gap related to reliable rational approaches for vulnerability assessment. This is particularly true for assessing vulnerability of buildings to floods. This vulnerability, which is important for economic reasons as well as for the safety of individuals and communities, is usually conceptualized on an empirical basis. Such empirical approaches, however, are plagued by considerable uncertainties, mostly because the damage‐causing mechanisms on the building envelope are poorly represented. In order to advance this area, this paper focuses on the structural vulnerability of traditional masonry buildings in alpine areas exposed to flash floods. A simplified physically based conceptual model which requires a limited amount of input data is proposed. The resistance of a wall impacted by a flash flood is studied in a limit analysis framework, considering different geometric ratios and building configurations. The resulting stability thresholds, expressed in dimensionless form as a function of the water depth, were positively compared with the results provided by numerical finite element models of the investigated geometries. The application of the proposed vulnerability model in risk mitigation strategies provides reliable information, suitable for a first‐level risk assessment on large building stocks.
1 July 2017 in Journal of Hydraulic Engineering
This paper investigates the lateral outflow over a short-crested side weir inserted in a converging rectangular channel with linearly decreasing width in the flow direction. This type of overflow device induces a spatially varied free-surface flow with decreasing discharge and, because of the convergent geometry, it can potentially improve the performance of the distribution channels commonly used in irrigation systems, sewer networks, wastewater plants, and hydropower facilities for flow diversion and control and for flood protection. A laboratory investigation is carried out to analyze the main hydraulic characteristics of this kind of flow and assess the improvement in outflow efficiency compared to the conventional rectangular side weir in a prismatic channel. Only subcritical steady flow conditions are considered. Experimental data show that the Froude number in the main channel downstream of the weir and the dimensionless weir height are significant variables to describe the outflow efficiency, and they confirm that the nonprismaticity of the main channel induces a noticeable increase in outflow performance. Furthermore, the experimental results show that the assumption of constant specific energy usually adopted in one-dimensional side weir flow modeling is reasonably valid, despite the considerable increase in the velocity-head and momentum correction coefficients along the side weir. Finally, the comparison between experimental data and numerical results shows that the classic one-dimensional modeling approach can adequately predict the main engineering aspects of side weir flows in nonprismatic channels.
1 April 2019 in Journal of Hydrology
1 February 2021 in Water Research
Although sewage diversion outside of a lake's watershed is now ordinary practice in the restoration of eutrophic lakes, often the observed recovery is slower than expected and the internal load from the lake anoxic sediments is identified as a possible reason. However, in the case of combined sewer, the quantification of the residual nutrient load discharged from sewer spillways must also be questioned. In this paper, the diversion efficiency of the sewer system along the east coast of Lake Iseo, a prealpine Italian lake where eutrophication effects are still severe, is investigated. To this purpose, a representative part of the sewer system was modelled by PCSWMM and calibrated by using an extensive series of discharge measurements. Water quality monitoring during wet weather periods reveals that the first flush is common in tributary sewers, whereas it is absent along the main collector. Moreover, flow discharges are strongly affected by infiltration waters, which are controlled by the lake water level. The calibrated model, including infiltration modeling, was used to assess the annual overflow volumes and the nutrient load through a continuous 10-year simulation. Simulations were conducted both with regard to the current conditions and to a climate change scenario. Results show that the discharged residual load is at least 7 times larger than the design value, with the water infiltration contributing to 17% to the overflow volume and that non-structural practices could considerably reduce the overall impact of the sewer. This research thus provides important insight into the potential impact of combined sewer overflows on lacustrine environments and addresses effective mitigation measures in similar contexts.
24 October 2019 in Journal of Hydraulic Research
A large number of flood-related fatalities in urban areas are due to drowning of people in vehicles. Therefore, reliable models of the vulnerability of vehicles impacted by flow are necessary for risk assessment and emergency management. This paper includes the effect of the sloping terrain in a four-parameter dimensionless conceptual model of the stability of vehicles impacted by flow. A set of parameters was calibrated on the basis of experimental data from the literature in order to reproduce the average stability limits of a wide range of vehicles tested in laboratory conditions. These parameters can also be used to represent the average stability conditions of a wide variety of circulating vehicles as required in flood risk mapping.