Andréa de Souza Almeida

Andréa de Souza Almeida

Auto-generated profile, based on publicly available information

Andréa de Souza Almeida

Universidade de São Paulo, Brasil

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Materials Research
Verified
Journal Article
Open access
PDF file
AAAndréa de Souza Almeida
Andréa de Souza Almeida
GCGabriel Criscuolo
Gabriel Criscuolo
TATiago Hendrigo de Almeida
Tiago Hendrigo de Almeida
ACAndré Luis Christoforo
André Luis Christoforo
FLFrancisco Antonio Rocco Lahr
Francisco Antonio Rocco Lahr
This aim of this work is to present an analysis of the influence of impregnation against biological demand, realized with saline solution of CCB (Chromated Copper Borate preservative) by vacuum-pressure process, on physical-mechanical properties of tropical wood species Simarouba sp., Cedrelinga catenaeformis and Erisma uncinatum Warm. In theory, such process could increase the number of surface defects in wood pieces and reduce its strength properties. To investigate this influence, the complete species characterization was carried out in two conditions (without treatment and CCB treated wood). Tukey’s multiple comparisons test (5% significance level) was applied. In addition, scanning electron microscopy (SEM) photomicrographs were obtained with the energy dispersive spectroscopy (EDS) to investigate preservative presence at the cellular level. Results permitted to conclude that CCB impregnation process did not affect physical-mechanical properties of the studied species.

1 January 2018 in International Journal of Materials Engineering
Verified
Journal Article
Open access
PDF file
PCPaulo Ricardo Santos Coimbra
Paulo Ricardo Santos Coimbra
AAAndréa de Souza Almeida
Andréa de Souza Almeida
TATiago Hendrigo De Almeida
Tiago Hendrigo De Almeida
DADiego Henrique de Almeida
Diego Henrique de Almeida
ECEduardo Chahud
Eduardo Chahud
FLFrancisco Antonio Rocco Lahr
Francisco Antonio Rocco Lahr
Wood is widely used in many sectors of civil construction as a structural material. Brazilian code ABNT NBR 7190:1997 Design of Timber Structures governs the method of project design as well as the characterization of wood for structural design. In this aspect the code considers wood as an orthoptic material, however is well known that the organic origin provides great anatomical complexity to its. This work aims to study the distribution of normal stresses in a Tauari wood beam subjected to the elastic regime, and to ascertain the current position of the Neutral Line during test. For this purpose, a four-point static bending test and subsequent compression and tension to the grain tests were performed to determine the modulus of elasticity and calculate the normal stresses by recording deformations and applying Hooke's Law. The data were statistically analyzed to define bests adjusts to Stress vs. Strain diagrams, and thus determine the location of the Neutral Line. It was verified that the position of the Neutral Line was a normal distribution variable, being located at 1,07cm above the geometric center of the board. Finally, the comparison between values of normal tension obtained experimentally and through the theoretical method was determined and similarities were verified in these data, being also plausible the theory for the calculation of the normal tensions of the wood beams, when it is in the elastic regime.

1 January 2025 in Matéria (Rio de Janeiro)
Verified
Journal Article
Open access
ACAndréa Almeida Criscuolo
Andréa Almeida Criscuolo
GCGabriel Criscuolo
Gabriel Criscuolo
FLFrancisco Antonio Rocco Lahr
Francisco Antonio Rocco Lahr
This study analyzes the influence of carbon black (CB) addition to a mixed adhesive based on vegetable oils, used in manufacturing Pinus sp. wood composite panels. To this end, test specimens were made to evaluate the following concentrations of carbon black (CB) was added at concentrations ranging from 0% to 100%. For each class of CB concentration, 6 specimens were made for physical and mechanical characterization in accordance with ABNT NBR 14810:2018 and used for microstructural analysis using Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR) of the panels. As a result, the addition of CB to the vegetable oil-based mixed adhesive resulted in statistically higher average values for the mechanical properties of the panels with 30% CB, achieving the same level of significant increase as the panels with 60% CB and 100% CB in their strength values. According to the ABNT NBR 14810:2018 standards, the panels from 0% CB to 5% CB were classified as P6 (structural panels for use in severe load conditions, in dry conditions) and the panels from 10% CB to 100% CB were classified as P7 (structural panels for use in severe load conditions, in humid environments).

10 July 2023 in Revista Principia
Verified
Journal Article
Open access
AAAndréa De Souza Almeida
Andréa De Souza Almeida
TLTamiris Luiza Soares Lanini
Tamiris Luiza Soares Lanini
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
FLFrancisco Antonio Rocco Lahr
Francisco Antonio Rocco Lahr
André Luis ChristoforoAndré Luis Christoforo
André Luis Christoforo
Estruturas mistas de madeira-concreto unem as melhores qualidades da madeira e do concreto, resultando em estruturas mais leves, rígidas e resistentes. São utilizadas na restauração de pisos e pontes de madeira, bem como na construção destas, em que se percebe um aumento da utilização desse sistema estrutural. Todavia, ainda são poucas as informações referentes às estruturas mistas em madeira-concreto na literatura, e o seu dimensionamento é abordado apenas pela normativa europeia Eurocode 5 (CEN, 2004). Nesse contexto, este trabalho apresenta as principais considerações a respeito do dimensionamento desse sistema estrutural e as principais divergências no emprego de tal técnica, essencialmente no Brasil, considerando a normativa brasileira em estruturas em madeira, para um eventual acréscimo sobre estruturas em madeira-concreto na ABNT NBR 7190 (ABNT, <!--[if supportFields]>ADDIN CSL_CITATION {"citationItems":[{"id":"ITEM-1","itemData":{"abstract":"Origem: Projeto NBR 7190:1996 CB-02 - Comitê Brasileiro de Construção Civil CE-02:003.10 - Comissão de Estudo de Estruturas de Madeira NBR 7190 - Design of wooden structures Descriptors: Wooden structure. Wood. Design Esta Norma cancela e substitui a MB-26:1940 (NBR 6230) Esta Norma substitui a NBR 7190:1982 Válida a partir de 29.09.1997 Palavras-chave:","container-title":"Rio de Janeiro","id":"ITEM-1","issued":{"date-parts":[["1997"]]},"page":"107","publisher-place":"Rio de Janeiro, Brazil","title":"Associação Brasileira de Normas Técnicas. NBR 7190: Projeto de estruturas de madeira","type":"legislation"},"uris":["http://www.mendeley.com/documents/?uuid=9bdab614-6224-4e64-865d-8842aa3a94a1"]}],"mendeley":{"formattedCitation":"(“Associação Brasileira de Normas Técnicas. NBR 7190: Projeto de estruturas de madeira”, 1997)","manualFormatting":"1997","plainTextFormattedCitation":"(“Associação Brasileira de Normas Técnicas. NBR 7190: Projeto de estruturas de madeira”, 1997)","previouslyFormattedCitation":"(“Associação Brasileira de Normas Técnicas. NBR 7190: Projeto de estruturas de madeira”, 1997)"},"properties":{"noteIndex":0},"schema":"https://github.com/citation-style-language/schema/raw/master/csl-citation.json"}<![endif]-->1997<!--[if supportFields]><![endif]-->). Ao final, é possível concluir que alguns ensaios padrões precisam ser normalizados para a implementação do dimensionamento dessa estrutura mista na norma brasileira, como por exemplo o ensaio do módulo de deslizamento do conector.

1 April 2023 in Ambiente Construído
Verified
Journal Article
Open access
AAAndréa de Souza Almeida
Andréa de Souza Almeida
GCGabriel Criscuolo
Gabriel Criscuolo
WFWalter Leal Filho
Walter Leal Filho
Tulio Hallak PanzeraTulio Hallak Panzera
Tulio Hallak Panzera
FLFrancisco Antonio Rocco Lahr
Francisco Antonio Rocco Lahr
André Luis ChristoforoAndré Luis Christoforo
André Luis Christoforo
Resumo ANBR 7190 (ABNT, 1997) define a caracterização simplificada, onde há o uso de relações matemáticas entre as propriedades de resistência e rigidez. Devido à grande influência da porosidade e da densidade aparente nas propriedades das madeiras e à busca por modelos matemáticos cada vez mais precisos, este trabalho teve como objetivo’ gerar modelos de regressão para a estimativa das propriedades de flexão estática (resistência “f M ” e módulo “E M ”), resistência à dureza paralela “f H,0 ” e normal às fibras “f H,90 ”, e resistência à tenacidade “W” de madeiras tropicais brasileiras a partir dos valores de porosidade, obtidos por meio da análise de porosimetria por intrusão de mercúrio, da densidade aparente e com base em ambas as propriedades em modelos de regressão multivariáveis. Todos os modelos de regressão apresentaram coeficientes de determinação “R2” superiores a 50%. A f M , a f H,90 e a W foram melhor estimadas pela densidade aparente, enquanto o E M e a f H,0 foram melhor estimados considerando a densidade aparente e a porosidade.