Felipe Nascimento Arroyo

Mr. Felipe Nascimento Arroyo

Federal University of São Carlos, São Carlos, São Paulo, Brazil
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 July 2022 in Buildings
Verified
Journal Article
Open access
PDF file
André Luis ChristoforoAndré Luis Christoforo
André Luis Christoforo
AGArthur Filipe Freire Gomes
Arthur Filipe Freire Gomes
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
FMFernando Júnior Resende Mascarenhas
Fernando Júnior Resende Mascarenhas
HSHerisson FERREIRA Santos
Herisson FERREIRA Santos
JAJorge Luís Akasaki
Jorge Luís Akasaki
Incorporating steel bars as reinforcement in glued laminated timber beams is a technique that aims at better structural performance, allowing the reduction of cross-sections. In the present research, based on experimental results from literature about the reinforcement of timbers beams, a parametric study was carried out with the aid of 164 numerical simulations performed within the scope of linear and nonlinear physical analysis via the finite element method to evaluate, with the aid of analysis of variance (ANOVA), the span, base, height, and the reinforcement ratio influence in the service force, ultimate force, and ultimate displacement. Multiple regression models evaluated by ANOVA were established to estimate the service and ultimate forces and ultimate and service displacements as a function of other variables. The results showed an average increase in the service load of 32% and 49%, and the ultimate load of 42.90% and 66.90%, for reinforcement rates of 2% and 4%, respectively. Regarding the multiple regression models, due to the good values obtained from the adjusted determination coefficients to estimate the values of the forces and the ultimate displacements, these can be used in the pre-design of glued laminated timber beams reinforced with steel bars.

31 August 2022 in Forests
Verified
Journal Article
Open access
PDF file
Bruno Santos FerreiraBruno Santos Ferreira
Bruno Santos Ferreira
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
MKMarcel Yuzo Kondo
Marcel Yuzo Kondo
HSHerisson FERREIRA Santos
Herisson FERREIRA Santos
RBRogério Lima Barreto
Rogério Lima Barreto
CCCristiane Inácio de Campos
Cristiane Inácio de Campos
Plywood is a structural composite mainly applied in construction. For this purpose, some sort of preservative treatment is recommended to increase its durability. One option of the available treatments is heat treatment, which promotes the modification of the wood properties. This treatment is carried out on the final product (plywood), because it can reduce strength if applied to the veneers. However, no study has proven such a reduction. Therefore, the aim of this work was to evaluate three different temperatures (160 °C, 180 °C and 200 °C) of the heat treatment on the veneer surface and on the physical properties (specific gravity, moisture content and swelling in thickness) and mechanical properties (MOE and MOR in static bending) of Pinus taeda plywood. A reduction was observed in the roughness of the veneer’s surfaces and the total extractives content changed, with a minimum value reached in the 160 °C treatment. The plywood specific gravity initially increased with the heat treatment and did not change at higher temperatures, moisture content reduced, and thickness swelling was not affected. There was no change in the mechanical properties of the plywood, evidencing that the veneer heat treatment does not prejudice mechanically the final product.

20 July 2022 in Forests
Verified
Journal Article
Open access
PDF file
ESESTEFANI SUANA SUGAHARA
ESTEFANI SUANA SUGAHARA
BCBruno Casagrande
Bruno Casagrande
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
Victor De AraujoVictor De Araujo
Victor De Araujo
HSHerisson FERREIRA Santos
Herisson FERREIRA Santos
CCCristiane Inácio de Campos
Cristiane Inácio de Campos
Plywood is widely used in civil construction. Due to the importance of preservation and gluing in bio-composites, this study compares the influence of a chemical treatment with CCA (chromated-copper-arsenate) on Pinus taeda L. wood veneers to produce two plywood types using phenol-formaldehyde (PF) and castor oil-based polyurethane (PU). Four different treatments were performed to analyze both varieties’ physical and mechanical properties. As a result, an improvement in the properties of the treated panels was observed. Lower moisture contents and better interactions caused by less thickness swelling and water absorption were identified in the PU-based plywoods. The treatment with CCA was efficient, improving these properties when they were compared to the reference panels. Most treatments evidenced increases in the modulus of elasticity and modulus of rupture for both adhesives when the CCA treatment was applied to the veneers. Comparing the resins, the PF showed the best values of modulus of elasticity. All treatments met the requirements defined by the Brazilian standard document for the glue line shear.

7 December 2022 in Forests
Verified
Journal Article
Open access
PDF file
ESESTEFANI SUANA SUGAHARA
ESTEFANI SUANA SUGAHARA
ADAndré Manuel Dias
André Manuel Dias
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
André Luis ChristoforoAndré Luis Christoforo
André Luis Christoforo
MCMichelle L. Costa
Michelle L. Costa
CCCristiane Inácio de Campos
Cristiane Inácio de Campos
In view of the lack of studies aimed at producing and assessing the effects of heat treatment of Oriented Strand Board (OSB) panels, this paper evaluated the thermal degradation kinetics of the raw materials, and the physical and mechanical properties of the panels made with eucalyptus wood and castor oil-based polyurethane adhesive. The OSB panels were subjected to post-production heat treatment (at 175 and 200 °C), replacing the use of wood chemical preservatives. Furthermore, the quantity of materials varied in the face:core:face layers in the proportions of 25:50:25 and 30:40:30, aiming to evaluate the possibility of structural applications for the panels. The results were statistically analyzed and compared with the specifications and classifications for OSB indicated by the European Standard EN 300 and the literature. The application of heat treatment improved the physical properties by decreasing the interaction with water and did not reduce the mechanical properties below the recommended levels. The variation in layer proportions indicated that all of them can be adopted without compromising the panel’s physical-mechanical performance. All treatments are compatible with the EN 300 classification for OSB/4 (heavy duty load-bearing boards for use in humid conditions), presenting technical feasibility and excellent structural profile for civil construction applications.

5 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
Heron Freitas ResendeHeron Freitas Resende
Heron Freitas Resende
Elvys Dias ReisElvys Dias Reis
Elvys Dias Reis
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
MMMatheus Henrique Morato de Moraes
Matheus Henrique Morato de Moraes
HSHerisson FERREIRA Santos
Herisson FERREIRA Santos
LBLuiz Antônio Melgaço Nunes Branco
Luiz Antônio Melgaço Nunes Branco
Investigations into the fire resistance of high-strength concrete (HSC) is extremely important to optimize structural design in construction engineering. This work describes the influence of polypropylene fibers on the mechanical properties and durability of HSC at high temperatures (25, 100, 200, 400, 600 and 800 °C). HSC specimens with 2 kg/m3 composed of polypropylene fibers are tested in a temperature range of 25 to 800 °C, followed by microstructural analysis. In addition, a statistical analysis is designed to identify the effect of factors, namely temperature and polypropylene fibers, and their interactions on mechanical properties and water absorption, electrical resistivity, mass loss and ultrasonic velocity. Most of the properties are improved by the incorporation of fibers, obtaining highly predictable regression models. However, the polypropylene fibers reduce compressive strength but improve the residual mechanical properties up to 400 °C.

13 August 2021 in BioResources
Verified
Journal Article
Closed access
LSLarissa Soriani Zanini Ribeiro Soares
Larissa Soriani Zanini Ribeiro Soares
IFIuri Fazolin Fraga
Iuri Fazolin Fraga
LPLucimar de Souza e Paula
Lucimar de Souza e Paula
FAFelipe Nascimento Arroyo
Felipe Nascimento Arroyo
HRHeloiza Candeia Ruthes
Heloiza Candeia Ruthes
FLFrancisco Antonio Rocco Lahr
Francisco Antonio Rocco Lahr
This study aimed to investigate the influence of moisture content variation on 12 mechanical properties of the Cedrelinga catenaeformis species. Of the 12 properties, four were significantly affected (based on analysis of variance at 5% significance level), and the compression and shear strengths in the direction parallel to the fibers exhibited the greatest difference in values from the saturated moisture condition of up to 12% (approximately 34% increase). Toughness exhibited a behavior different from that predicted by the normative equation, in which increase in moisture content implied increase (approximately 59%) of the property studied. Because a good part of the properties was not significantly affected and Brazilian standard ABNT NBR 7190 (1997) considers expressions that lead to a considerable increase in mechanical properties with the reduction of moisture content, this approach was unfavorable to the safety of the project, motivating the development of other studies to collaborate in revisions of this normative document.