19 July 2025 in Materials & Design
25 September 2022 in Materials Science and Engineering: A
27 October 2025 in Acta Materialia
24 July 2026 in Scripta Materialia
1 January 2022 in SSRN Electronic Journal
The aim of the present study was to identify the effect of solute Ni element on the plastic deformation and its thermal activation process of 18Cr ferritic stainless steels. Single-crystal micropillars with different diameters of approximately 2 and 5 μm were fabricated on the surface of Fe-18%Cr-Ni alloy sheets containing different contents of Ni (0–2 mass%). Compression tests were performed on the micropillars at different initial strain rates to investigate the strain rate sensitivity ( m ) of stress for the slip initiation and the specimen-size dependence of the m value. In micropillars with a small diameter of 2 μm, the Fe-18Cr binary alloy specimen exhibited a relatively higher strain-rate sensitivity of initial slip stress ( m = 0.12), whereas m was reduced to 0.01 by adding 2% Ni. The same trend was observed in micropillars with a larger size of approximately 5 μm. The experimental results were utilized to evaluate the activation volume of plastic deformation. The activation volumes of the Fe-18%Cr alloy and alloy containing 1% Ni followed the specimen-size dependence trend of activation volume in bcc metals; however, the alloy containing 2% Ni exhibited larger activation volumes, suggesting a different thermal activation process presumably due to the significant interaction that occurred between dislocations and solute Ni atoms in bcc solid-solutions.