1 January 2025 in Materials Science
19 March 2023 in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
В статті наведений оціночний аналіз дії ходових систем колісних сільськогосподарських тракторів на ґрунт. Аналізу підлягала вибірка з понад 600 тракторів класичної компоновки провідних світових виробників, виконаних за схемою 4К4а. Для визначення показників максимального тиску на ґрунт застосована величина контурної площі плями контакту при допущенні, що шини експлуатуються за умов, які характеризуються індексом швидкості А6 при значному крутному моменті протягом тривалого часу. Наведено розрахункову функцію розподілу ймовірності максимального тиску на ґрунт вибірки сучасних колісних тракторів для фіксованого конструктивного розташування центру ваги. Проаналізовано конструктивне розташування центру ваги тракторів за групами з відповідною різницею індексів довжини окружності кочення ΔRCI=4…9. Встановлено, що для тракторів загального та універсально-просапного призначення з ΔRCI = 4…6 найбільш поширений коефіцієнт розподілу ваги становить 0,40 або 0,44. Для тракторів спеціального (утилітарного) призначення з ΔRCI = 7…9 найбільш поширений коефіцієнт розподілу ваги 0,45…0,46. Проведено аналіз максимального тиску на ґрунт в широкому діапазоні сили тяги трактора при підтриманні постійним оптимального розподілу ваги, що залежить від співвідношення контурної площі плям контакту шин коліс переднього та заднього мостів. Аналіз показав, що підтримання постійним оптимального розподілу ваги при виконання тягових операцій дає змогу знизити максимальний тиск на ґрунт на 8…40 кПа. Це дає змогу усереднено підвищити частку території України, де сучасні колісні трактори з одинарними шинами зможуть експлуатуватися без порушення агроекологічних вимог, на 14%.
29 October 2025 in Bulletin of the National Technical University «KhPI» Series: Engineering and CAD
Surfacing is one of the most common and economically advantageous methods of restoring worn or damaged parts of machines and mechanisms. Due to its versatility, surfacing technology allows restoring the geometry of complex and heavily worn structural elements. A characteristic feature of this process is that after surfacing, the structure and properties of surfacing materials change significantly compared to the initial state, which is why the need for a detailed study of the structure and properties of the surfacing metal and, if necessary, the development of technologies for improving the structural and mechanical state of the metal in the surfacing zone becomes relevant every time. The work conducted a study of the microstructure of the surfacing metal of high-chromium steels containing 0.1-0.3% carbon, revealed its phase composition and determined properties. The role of δ-ferrite and austenite phases in reducing the hardness of steels after using them as surfacing materials was established. The positive effect of increasing the heating rate on the characteristics of the mechanical properties of the surfacing metal was shown. There is a range of tempering temperatures with rapid heating, after processing in which the deposited metal receives such a combination of strength and ductility indicators that cannot be achieved during traditional tempering in a furnace. The peculiarities of the influence of rapid heating on the fine structure of the deposited metal of high-chromium steels have been revealed, primarily on the size of the α-phase blocks, type II distortion, dislocation density, and also on the dispersion of the carbide phase. The prospects of using heat treatment with rapid induction heating to ensure the necessary indicators of the structural strength of heavily worn parts of machines and mechanisms restored by welding have been shown.
20 June 2022 in Bulletin of the National Technical University «KhPI». Series: Automobile and Tractor Construction
The paper presents a mathematical model for determining the traction and dynamic performance of tractors using PowerMix field test cycles. The mathematical model was successfully tested, during which a set of traction-dynamic parameters of a wheeled tractor with the maximum discrepancy on individual indicators relative to experimental data, which is -8.4… + 7.9%. A plan of a simulation experiment is proposed, which takes into account the distribution of the annual volume of spring and summer-autumn tractor work by typical agricultural operations, and includes loading traction cycles with power take-off through PTO and hydraulic system of the tractor. To assess the efficiency of tractors based on a set of traction-dynamic indicators obtained from field PowerMix test cycles, developed a method of bringing the simulation results to the performance of the base tractor with a capacity of 100 kW, which corresponds to the basic cycles PowerMix. The technique makes it possible to compare tractors of arbitrary design solutions and power. As an example, the results of modeling the traction and dynamic performance of the New Holland T6.180 tractor on PowerMix field test cycles determined the average values of productivity and per hectare of fuel consumption plowed by the base tractor, which are 1,239 ha / h and 14.58 kg / ha, respectively
2 September 2024 in Physicochemical Mechanics of Materials
KZKyiv Novokramatorsky Mashinostroitelny Zavod
Kyiv Novokramatorsky Mashinostroitelny Zavod
+5
The necessity to study such characteristics of self-shielding flux-cored wire as the filling rate (CWF) and core filler density (rсf) is grounded. The influence of the exothermic addition content, exothermic addition components ratio, graphite content on the filling rate (CWF) and filler density (rсf) was studied using Fractional Factorial Design, the mathematical models are built. It is shown that the content of exothermic addition (CEA) and graphite (Сgraphite) in the charge has the greatest influence on the filling rate (CWF). Maximum values CWF and density rсf are obtained with the following characteristics: CEA = 20–28 wt%, MnO2/Al = 2–2.8 and Сgraphite = 4–6 wt%.