28 December 2021 in IEEE Transactions on Industry Applications
In this article, two double flux modulation permanent-magnet machines (DFMPMs) with PMs on both stator and rotor are introduced. The two DFMPMs share a similar operation principle. However, due to the different stator-PM arrangements, the two DFMPMs show different performances. In order to analyze their performance characteristics, their analytical models are built and verified by finite element analysis (FEA). Moreover, to quantitatively compare their electromagnetic performances more accurately, the two DFMPM topologies are optimized, respectively, and compared in terms of back-EMF, cogging torque,rated torque, torque ripple, power factor, and efficiency. Finally, the DFMPM topology with relatively better performances is built and tested. The experimental results match well with the FEA simulations.
30 August 2024 in IEEE Transactions on Transportation Electrification
Existing vernier permanent magnet (PM) machines usually exhibit unsatisfactory torque and efficiency performances under strong cooling and wide-speed operations. This paper presents a novel vernier machine with buried Halbach-array PMs, aiming to achieve improved torque and efficiency performances in high electrical load and wide-speed conditions. The proposed vernier machine has a low pole ratio and fractional slot concentrated winding. Besides, the rotor PMs are a combination of spoke-type and inset-type PMs. In this paper, the operation principle of the proposed vernier machine is introduced and analyzed. Besides, the torque performances of the proposed vernier machine are examined under rated load, overload, and flux weakening conditions. Furthermore, the proposed vernier machine is compared with two regular vernier machines, i.e. one is the typical surface-mounted vernier PM machine, and the other one is a consequent-pole V-type vernier PM machine. It shows that the proposed vernier machine exhibits the highest torque density and efficiency. Finally, experiments are conducted to verify the output torque and efficiency of the proposed vernier machine.
20 May 2025 in IEEE Transactions on Industry Applications
Spoke-type (ST) magnetic geared permanent-magnet machine (MGPM) has been reported to exhibit higher torque density than regular surface-mounted (SM) MGPMs. However, this assertion is mainly based on finite element analysis (FEA), and the in-depth mechanism is not clear. This paper provides a new perspective on the torque generation mechanism of the ST-MGPM using the harmonic characteristic analysis. First, the working principles of the ST-MGPM and SM-MGPM are presented, showing that their torque densities are limited by the corresponding coaxial magnetic gear (CMG) part. Then, the radial and tangential harmonic characteristics in the ST-CMG and SM-CMG are analytically derived, identifying the predominant harmonics that contribute to the transmission torque. On this foundation, a harmonic-oriented multi-level optimization method of the ST-MGPM is proposed, which has higher optimization efficiency because only the magnetostatic FEA is needed. Finally, a prototype of the ST-MGPM is built and tested to verify the theoretical analyses.
14 June 2023 in IEEE Transactions on Magnetics
The traditional permanent magnet (PM) magneto motive force (MMF) / specific permeance model has been widely applied to analytically predict the magnetic field of vernier permanent-magnet machines (VPMs). However, it fails to accurately predict the performances of spoke-type VPMs. This paper clarifies the intrinsic reason, i.e. the spoke-type VPMs have a large additional PM MMF introduced by the stator slotting, while the traditional model ignores it. In this paper, the additional PM MMF is analytically calculated and its influence on electromagnetic performance is comprehensively investigated. It shows that the additional PM MMF leads to reductions in the airgap flux density, back-EMF, and torque performances of spoke-type VPMs. Especially when the pole ratio is high, the reductions due to the additional PM MMF are more obvious. Finally, a spoke-type VPM prototype is built and tested to verify the theoretical analysis.