Institute of Metal Science, Equipment and Technologies with Hydro and Aerodynamics Centre “Acad. A. Balevski”, Bulgarian Academy of Sciences, 67 Shipchenski prohod blvd., Sofia 1574, Bulgaria
Auto-generated profile, based on publicly available information
Pavel Kuzmanov
Institute of Metal Science, Equipment and Technologies with Hydro and Aerodynamics Centre “Acad. A. Balevski”, Bulgarian Academy of Sciences, 67 Shipchenski prohod blvd., Sofia 1574, Bulgaria
Modified with nano-powders (NP), AlSi7Mg aluminum alloy, P265GH steel and GG25 gray cast iron, have been investigated. Thermal and metallographic analyses have been made. For modified AlSi7Mg alloy, reduction of overcooling and duration of crystallization at the initial crystallization and their increase at eutectic crystallization have been found. For cast iron GG25, reduction of overcooling at crystallization was established and for P265GH steel, overcooling was not recorded, only a change in the slope of the temperature dependence. The thermal effects obtained in the crystallization correspond to the refinement of micro- and macrostructures. A mathematical model for crystallization of samples for thermal analysis has been developed and solved.
1 October 2019 in IOP Conference Series: Materials Science and Engineering
The process of hardening a hypereutectic aluminium-silicon alloy AlSi18 in unmodified, modified and nano-modified state has been studied. Two types of modifiers have been used - a standard modifier P, introduced into the melt by means of the ligature CuP 0,4wt.%, and a nanomodifier (nanodiamonds - ND) 0,1wt.%. The influence of the various types of modifiers on the process of crystallization, as well as on the size of the primary Si crystals in the structure of the alloy and their distribution in it has also been discussed.
Two types of A356 alloy castings in initial and modified with nanoparticles condition produced by gravitational casting were studied. Samples, as-cut from the castings, were subjected to light optical microscopy (LM), thermal analyses, Electron Backscattered Diffraction (EBSD) and Scanning Transmission Electron Microscopy (STEM) analyses. Results, obtained by EBSD, confirmed that there is grain refinement in samples from castings with added nanoparticles compared to the initial ones. STEM analysis shows agglomerates of nanoparticles in examined foils. Nanoparticles’ position in the microstructure confirms the hypothesis that they act as nucleating sites during the alloy solidification, which is the reason for observed fine-grained microstructure.
1 March 2013 in Journal of Theoretical and Applied Mechanics
Processes of crystallization during casting formation from aluminum alloys, steel and cast iron have been studied using 3-D com- puter simulation. Temperature fields of castings have been obtained and the microstructure distribution of these castings has been predicted. A comparison between numerical results and experimental measurement has been performed. It is proved, that the proposed approach is suitable for investigation and analysis of casting technologies.