4 September 2023 in Arabian Journal for Science and Engineering
FRFrancisco J. Rodríguez-Dopico
Francisco J. Rodríguez-Dopico
The use of adhesives in the marine sector is rather limited at the time being, but their use in specific areas of the ship would be an advantage due, among other things, to their low weight and low stress concentration along the bonding joint. The aim of this work is to predict the long-term behaviour of the material, as this is a critical factor when using adhesive as a bonding method in ships, since its durability must be guaranteed throughout a previously defined life cycle. This can be predicted by applying the time–temperature superposition principle (TTS), which involves carrying out a test at different temperatures for each specimen, considerably reducing the test time. Two types of experiments have been carried out according with operation modes in dynamic mechanical analysis (DMA): a dynamic frequency sweep and a stationary creep test under constant stress, to check the behaviour of the adhesive under both dynamic and sustained loading. The master curve for the frequency study will be constructed in such a way as to cover the whole range of relevant vibrations that can occur on the vessel, while that for the creep test the curve obtained covers a range of 25 years, which is usually used as the minimum service life in shipbuilding. For both, a temperature range from room temperature to the maximum operating temperature of the material established by the manufacturer shall be studied.
13 October 2024 in Ocean Engineering
25 March 2026 in SSRN Electronic Journal
DSDaniel Abelardo Souto Silvar
Daniel Abelardo Souto Silvar
The implementation of structural adhesives in shipbuilding is gaining increasing interest due to their potential advantages over traditional joining methods, including improved stress distribution, weight reduction, and enhanced compatibility between dissimilar materials. However, their reliable integration into naval structures requires a comprehensive understanding of their behaviour under service conditions where cyclic loading and aggressive marine environments act simultaneously. In this context, the present study investigates the influence of polar marine ageing on the fatigue performance of a structural acrylic adhesive. An experimental programme combining static and displacement-controlled fatigue tests was carried out on bulk adhesive specimens in both initial and aged conditions. The ageing procedure consisted of controlled thermal cycling followed by sustained low-temperature exposure, designed to reproduce the combined effects of temperature fluctuations and prolonged polar conditions. By isolating the intrinsic behaviour of the adhesive in its bulk state, this work evaluates how environmental exposure modifies its mechanical response and fatigue performance. The comparative analysis of the S-N curves indicates that ageing enhances the resistance of the adhesive under low-cycle, high-stress conditions, while reducing its durability in the high-cycle fatigue regime, reflecting a transition of the material towards a more brittle mechanical response following polar marine ageing.
29 August 2026 in Journal of Thermal Analysis and Calorimetry
Joule (resistive) heating is a promising alternative to conventional oven curing for carbon/epoxy composites because it provides fiber interior heating and can reduce cycle time and energy consumption. From a fatigue perspective, however, the influence of the curing route on long-term mechanical performance is less understood. Here we compare the fatigue response (three-point bending load versus cycle count) of [90/0/90] laminates manufactured by Joule heating and by oven cure. Using a data-driven framework based on generalized additive models (GAMs), we analyze the effects of curing route, isothermal temperature and dwell time, ramp rate, displacement-controlled testing, and specimen orientation. Nonlinear degradation trends are captured by semiparametric GAMs fitted to 27 coupons, totaling 365,059 observations. The curing route emerges as the dominant driver of fatigue degradation: Oven-cured coupons start at higher load but lose capacity more rapidly, whereas Joule-cured coupons exhibit a smoother and more stable decline with cycling. Vertical orientation consistently yields higher loads, while within the explored Joule design space (110–130 $$^{\circ }\text {C}$$ , 3–12 min) the effects of isothermal temperature, dwell time, and ramp rate are comparatively modest. These results support the viability of Joule heating as an alternative to conventional curing from the standpoint of fatigue behavior, in addition to its known gains in processing efficiency. The GAM approach identifies the key design parameters, quantifies their relative importance, and provides an interpretable tool for comparing curing programs and guiding the optimization of electrically cured composite structures.