Real-time temperature mapping that solves local overheating problems is important for obtaining an optimized thermal design for high-efficiency power transformers. Internal temperature monitoring of operating power transformers can also be leveraged for asset monitoring applications targeting at fault detection enabling condition-based maintenance. Transformers present a variety of challenging sensing environments such as high-levels of electromagnetic interference and limited space for conventional sensors to operate. Immersion of power transformers in insulation oils for thermal management during operation and the presence of relatively large and time varying electrical and occasional magnetic fields make sensing technologies requiring electrical wires or active power at sensing locations highly undesirable. In this work, we investigate thermal response of a standard telecom fiber instrumented on compact transformer cores by using an optical frequency-domain reflectometry scheme. Correlation between conventional temperature sensing methods and fiber-optic sensing results as well as trade-offs between spatial resolution and temperature measurement accuracy is discussed and spatially resolved real-time monitoring of temperatures in energized transformers is experimentally demonstrated.
Low loss switching of soft magnetic materials at high frequencies benefits from tuning the induced anisotropy. We show induced anisotropies, , as large as , developed by strain annealing of Co-rich nanocomposite alloys. Crystalline phases in this alloy system have large negative magnetostrictive coefficients, leading to anisotropy fields per unit stress over twice those developed in FINEMET. Tunable permeability and reduced thicknesses achieved in this process can mitigate eddy-current losses. Giant induced magnetic anisotropies are discussed in light of models for the micromechanisms of amorphous metal deformation, stress-assisted transformations in the crystallites, and directional pair ordering.
Monodisperse hematite (α-Fe2O3) nanoparticles were synthesized by forced hydrolysis of acidic Fe3+ solution. Rietveld analysis was applied to the X-ray powder diffraction data to refine the lattice constants and atomic positions. The lattice constants for a hexagonal unit cell were determined to be a ∼ 0.50327 and c ∼ 1.37521 nm. High resolution transmission electron microscopy was employed to study the morphology of the particles. Atomic scale micrographs and diffraction patterns from several zone axes were obtained. These reveal the high degree of crystallinity of the particles. A series of observations made on the particles by tilting them through a range of ±45° revealed the particles to be micaceous with stacking of platelets with well defined crystallographic orientations. The Morin transition in these nanoparticles was found to occur at 210 K, which is lower temperature than 263 K of bulk hematite. It was ascertained from the previous Mössbauer studies that the spin orientation for nano-sized hematite particle flips from 90° to 28° with respect to the c-axis of the hexagonal structure during the Morin transition, which is in contrast to that observed in bulk hematite where spin orientation flips from 90° to 0°.
The solid-state transformer (SST) is an emerging technology which is gaining increasing importance for future power distribution systems. Here, we present 2-D finite-element analysis (FEA) of single-phase SSTs for operating frequencies of 50 kHz. We consider designs to benchmark materials aimed at controlling high-frequency losses to achieve higher power densities. The FEA model is solved in the time domain for frequencies of 50 kHz, at a fixed 800 V input voltage and 10 kW output power for the first four cycles. This paper analyzes the influence of leakage inductance on the waveform with an increasing number of turns and discusses how to calculate the leakage inductance of the different winding topologies by FEA. In addition, transformer topologies are coupled to a power analysis using a Steinmetz parameterization of magnetic losses capturing induction and field scaling for transformer losses for FeNi-based metal amorphous nanocomposites (MANCs) for SST applications and their benchmarking with amorphous and other MANCs and ferrites. Recently, discovered FeNi-based MANCs allow smaller transformers at equivalent power as compared to Si steels, Metglas, and Co-based MANCs. These Fe-rich and non-Co containing MANCs also offer economies based on lower raw materials costs as compared with Co-based MANCs and significantly improved mechanical properties with respect to commercially available Fe-based MANCs.
The temperature stability of field induced uniaxial anisotropy was investigated by thermomagnetic treatments of amorphous ribbons after field annealing below and above the crystallization temperature. We conclude: (1) Field annealing treatments are necessary to properly investigate the temperature stability of , (2) of field crystallized alloys exhibit improved temperature stability relative to alloys remaining amorphous after field annealing, and (3) larger is obtained for field crystallization treatments as compared to zero-field crystallization followed by field reannealing. Field crystallization may be required for elevated temperature applications when field induced anisotropy is critical for performance.