21 December 2017 in IEEE Transactions on Industry Applications
Permanent magnet synchronous motor (PMSM) driven subsea pumps have the potential to lower the operating costs of subsea pumping modules by improving efficiency, enhancing reliability and by reducing weight and size. The higher operating speed of PMSM compared to an induction motor of similar size, allows for a wider operating envelope for the pump, including operation in high gas volume fractions scenarios.
9 December 2014 in IEEE Transactions on Industrial Electronics
High-power grinding mills are used in the cement and mining industries to crush clinker or copper ore and grind these materials to fine powder. The multimegawatt speed-controlled mill drives operate at a very low angular speed. Synchronous motors with a high number of pole pairs are used as the prime movers. They are traditionally fed by load-commutated thyristorized cycloconverters. These are prone to failure modes that can lead to excessive torque pulsations and high overcurrents. The huge stator, which was built as a separate ring-shaped structure around the tubular mill, may then get mechanically displaced, and the operation of the plant is interrupted. A novel and reliable direct drive uses a voltage source inverter that operates at the unity power factor for increased efficiency. Synchronous optimal pulsewidth modulation ensures a low harmonic current distortion and reduced switching losses at a very low switching frequency. The optimization of the pulse patterns takes the anisotropic magnetic properties of a separately excited synchronous motor into account. The implementation in a 23-MW semiautonomous grinding mill installed in a Zambian copper mine is intended.