28 September 2012 in Journal of Manufacturing Science and Engineering
Helical milling tools of nonuniform helix angles are widely used in manufacturing industry. While the milling tools with these special cutting edges are already available in the market, their cutting dynamics has not been fully explored. Also, there have been several attempts to introduce complex harmonically varied helix tools, but the manufacturing of harmonic edges is extremely difficult, and their effect on cutting dynamics is not clear either. In this study, a general mechanical model is introduced to predict the linear stability of these special cutters with optional continuous variation of the helix angle. It is shown that these milling tools cause distribution in regeneration. The corresponding time-periodic distributed delay differential equations are investigated by semi-discretization. This work points out how the nonuniform and harmonically varied helix cutters behave in case of high and low cutting speed applications.
15 January 2014 in International Journal of Dynamics and Control
8 May 2020 in Journal of Manufacturing Science and Engineering
Two different kinds of descriptions for edge geometry of harmonically varied helix tools are studied in this work. The edge geometries of the so-called lag and helix variations are used in this paper, and their equivalency is established from engineering point of view. The equivalent relation is derived analytically and the nonlinear algebraic system is described, with which the numerical equivalency properties can be determined. The equivalent description can be utilized in variable helix tool production to determine an optimized set of geometrical parameters of the edge geometry. The stability properties are shown and compared for a simple one degree-of-freedom case with the nonuniform constant helix tools. The robustness of the results related to the harmonically varied tools is critically discussed in this paper showing advantages compared to the nonuniform constant helix case. The results suggest that the more extreme the edge variation is, the more stable the process performed with the corresponding harmonically varied tool becomes.