2 December 2025 in IEEE Transactions on Automation Science and Engineering
The conventional Model-Free Deadbeat Predictive Current Control (MFDPCC) combined with an Extended State Observer (ESO) demonstrates good steady-state performance in the field of Permanent Magnet Synchronous Motor (PMSM) control. However, its controller gain remains dependent on the motor inductance parameter; if the controller gain is mismatched, it may lead to increased current ripple. To address this issue, this paper proposes a Model-Free Deadbeat Predictive Current Control method based on Power Difference Control (PDC). First, the impact of controller gain mismatch in the ESO method on control performance is analyzed. Second, the advantages of the proposed PDC method are detailed; this method relies solely on real-time input current data from the current sampling period, rendering the controller output independent of motor parameters and ensuring strong robustness. Finally, the proposed control method is experimentally validated on a built 1.5 kW PMSM experimental platform, demonstrating the effectiveness and practical application value of the method.
22 November 2023 in Measurement and Control
In order to solve the dynamic analysis and chaotic motion control problems of the current-mode-controlled Boost converter system, a state equation model in the continuous current mode is established. The evolutionary path of the periodic motion of the system through the doubling bifurcation to the chaotic motion is analyzed by the bifurcation diagram, Poincaré sections and phase portraits. Then, according to the fundamental principle of the resonant parametric perturbation (RPP) method, a controller is designed based on the model-free adaptive control (MFAC) method to output the perturbation amplitude, and the disturbance quantity is calculated according to the perturbation amplitude. By adding a small amplitude disturbance to the controllable parameter of the controlled system, the chaotic motion of the system is guided to expected periodic orbit. The advantage of this method is that no precise mathematical model (PMM) of the system is required. At the same time, the design of the controller is simple and easy to implement.
27 July 2025 in Journal of Vibration and Control
To address the issue of degraded control performance in linear induction motor (LIM) systems caused by nonlinearities and uncertainties, this paper proposes a model-free adaptive fast super-twisting sliding mode control strategy (BES-MFAFSTSMC), in which controller parameters are optimized using the Bald Eagle Search (BES) algorithm. First, a Partial Form Dynamic Linearization (PFDL) data model is established based on the input–output data of the LIM system. Then, using this data model, a controller is designed by integrating a discrete terminal sliding mode function and a discrete fast super-twisting reaching law. To ensure control quality, an exponential decay term is introduced into the sliding surface to accelerate error convergence, while a discrete cumulative term is incorporated into the reaching law to effectively reduce system chattering and enhance robustness. The controller parameters are optimized using the BES algorithm. Finally, the Lyapunov stability theory is employed to prove the stability of the proposed control strategy. Simulation results demonstrate that the proposed method effectively improves the dynamic performance and robustness of the LIM system.