25 June 2021 in IEEE Electron Device Letters
A 500 GHz TE 85 mode continuously frequency-tunable gyrotron has been designed, fabricated and investigated experimentally. In the experiment, the gyrotron operates at the second cyclotron harmonic stably. The operating frequency is tuned by means of adjusting the operating magnetic field or the beam energy. The variation of the output power is also investigated. It is found that when the operating magnetic field is changed, the frequency-tuning range is much bigger than that when the beam energy is changed.
1 August 2022 in IEEE Transactions on Electron Devices
In this article, the experimental investigations on a 263-GHz gyrotron are presented. With the change of the operating magnetic field and the beam energy, the operating frequency is adjusted and the output power is also varied. It is found that when the operating magnetic field changes from 9.59 to 9.82 T at a fixed operating voltage of 20 kV and a beam current of 0.8 A, the operating frequency increases from 263.39 to 264.84 GHz, the frequency-tuning range is about 1.45 GHz, and the output power is from 26 to 463 W. When the operating voltage increases from 14.4 to 22.2 kV at a fixed operating magnetic field of 9.65 T, the operating frequency decreases from 263.68 to 263.40 GHz, the frequency-tuning range is 0.28 GHz, and the output power changes from 52 to 424 W. When the operating magnetic field is fixed at 9.65 T and the operating voltage is fixed at 20 kV, but the beam current increases from 120 to 880 mA, the output power increases from 21 to 277 W, the operating frequency increases from 263.396 to 263.425 GHz, and the frequency-tunable range is 0.029 GHz. The effects of the axial position of the gyrotron in the superconducting magnet system on the operating frequency, the frequency-tuning range, and the output power are also investigated experimentally. When the beam current is increased, the nonstationary phenomenon is observed.
17 April 2023 in IEEE Transactions on Electron Devices
Experimental investigations on a 0.66-THz gyrotron have been accomplished. Meanwhile, the magnetic injection gun and the gyrotron beam–wave interaction cavity are designed and optimized. The gyrotron cavity is a traditional three-section cavity. The experimental results demonstrate that this gyrotron is under the stable operation of the second cyclotron harmonic. The operating mode is TE $_{\text {14, {5}}}$ mode and the pulselength is $80 \mu \text{s}$ . By tuning the beam energy and the operating magnetic field, the maximum frequency of this gyrotron reaches 656.95 GHz and the output power is up to 282 W. Furthermore, this gyrotron can be utilized as a frequency-tunable source, the frequency-tunable range is about 70 MHz. This gyrotron is specially designed to meet the requirement of the experiment of irradiating THz waves on living bodies.
2 February 2023 in IEEE Transactions on Electron Devices
A frequency-tunable gyrotron with multiband radiation has been designed, manufactured, and investigated experimentally. The frequency tuning scheme utilizing transverse modes switching and axial mode transition is employed to obtain multiband radiation. Three modes TE02, TE43, and TE24 are excited successively with the increase of the magnetic field. The main operating frequency of these modes are 140, 250, and 263 GHz, respectively. Experimental results indicate that a certain frequency-tuning range can be obtained at each frequency band by means of exciting a series of high-order axial modes.
2 May 2022 in IEEE Transactions on Electron Devices
As a terahertz (THz) radiation source, the frequency-tunable gyrotron is promising in application and attractive to researchers. In this article, the nonstationary phenomenon in a frequency-tunable gyrotron operating in different regimes—gyromonotron, transition, and gyro-backward-wave oscillator (BWO)—has been investigated in detail by 3-D particle in cell (PIC) simulation. Simulated results demonstrate that among the three regimes, gyromonotron has the strongest capability to keep stationary, and nonstationary oscillations are most likely to occur in the transition regime. Moreover, in the gyro-BWO regime, the capability of the system to maintain steady-state operation gets slightly improved with the increase in the axial mode. The corresponding interpretation is based on detuning frequency and feedback mechanism. Finally, the effect of the velocity spread on the nonstationary behavior has also been studied. Investigations reveal that the stability of stationary oscillations would be weakened when velocity spread is considered. The results in this article may be of benefit of a deeper insight into the nonstationary phenomenon in a frequency-tunable gyrotron.
3 June 2024 in IEEE Transactions on Antennas and Propagation
Resolving multipath artifacts in concave objects is one of the keys to the development of millimeter-wave (mmW) security imaging. This paper deals with the multipath artifacts problem of dihedral-angle objects via building a ray-tracing model to analyze multipath echo signals. A novel two-dimensional (2-D) accurate range compensation (ARC) algorithm of a monostatic uniform linear antenna array is proposed to accurately reconstruct dihedral-angle objects with multipath artifacts. Firstly, a 2-D ray-tracing model of dihedral-angle objects is established. The causes of multipath artifacts as well as the propagation characteristics of multipath echo signals are analyzed, and the key information such as the coordinates of equivalent reflection points (ERPs) are extracted from the model. Secondly, a Fourier transform (FT) ranging method is proposed to distinguish multipath echo signals, and a 2-D ARC algorithm is proposed to separate and compensate the echo signals of multiple reflections based on the ray-tracing model. The 2-D ARC algorithm is analyzed and compared with prior art, and the computational complexity and noise robustness of the 2-D ARC algorithm are discussed and analyzed in details. Finally, simulations and experiments are conducted to validate the effectiveness of the 2-D ARC algorithm.