15 October 2021 in IEEE Transactions on Instrumentation and Measurement
The high sensitivity for low-frequency fields makes the tiny giant magnetoresistance (GMR) sensors suitable for high-resolution eddy-current (EC) imaging. In this work, we proposed a novel design of the miniature differential EC probe with a spin-valve GMR sensor for surface and subsurface EC imaging. The differential EC probe consists of a full-bridge GMR chip mounted vertically on the edge of a tiny printed circuit board to reduce the liftoff distance. The excitation signal is perpendicular to the sensing axis of the GMR chip, which makes it sensitive to the unbalance EC signal on the surface of a conductive sample. The miniature EC probe operated at frequencies from 5 to 65 kHz is sensitive to the hidden defects on a flat conductor. The spatial resolution and stability of the device are verified by taking the 2-D scan images over the copper film samples with hidden defects, showing that the spatial resolution is better than 2 mm for the flaw 0.5 mm below the top surface of a multilayer structure. The proposed device is useful in the detection of small surface and subsurface defects, such as cracks, metal loss, and other mechanical damages.
17 May 2024 in IEEE Transactions on Magnetics
This work presents a flaw detection system consisting of an array of eddy current (EC) probes based on giant-magnetoresistance (GMR) sensors for mapping the defects on a metal sheet. Before measurement, a spatially dependent calibration process was done to compensate for the interchannel inconsistency in output offsets and responsivity. The calibrated eight-channel probe array exhibits high sensitivity in revealing tiny features of defects with superior spatial resolution. The proposed system allows for the visualization of the geometric characteristics of the surface defects with an interspacing of more than 2 mm. The suggested approach has great potential in the nondestructive testing of metallic sheets for the characterization of minor and intricately shaped flaws.
1 December 2023 in IEEE Transactions on Instrumentation and Measurement
This study proposes a novel approach for contactless conductivity measurement of nonmagnetic metal sheets for a production line. The system uses a self-resonant eddy-current (EC) sensor as the conductivity probe, of which the sensitivity is enhanced by minimizing the parasitic resistance in the resonant circuit. The output responses at various liftoff distances are nonlinear curves unique to the sample’s conductivity. The quaternary polynomial regression is utilized to establish the analytic approximation function to depict the correlation between the phase and the logarithmic magnitude for standard samples. The phase–magnitude relationships are generally monotonic and useful for conductivity conversion using the standard data. The polynomial interpolation is employed to establish the phase–conductivity relations based on the standard samples. The self-developed computer software can instantaneously convert the probe output into the conductivity of the metallic material under test. The experimental findings point to the feasibility of the suggested method that can perform conductivity measurement with a relative error of less than 3% at a liftoff distance of less than 1 mm, indicating the practicability of the proposed technique in conductivity mapping for nonferrous metals.
28 May 2021 in IEEE Transactions on Magnetics
The accuracy in the measurement of magnetization curve (M-H) for soft materials is easily influenced by the external static field in the unshielded environment. To eliminate the influence from the environmental field, the measurement system must be placed in a zero-gauss chamber. However, such a device is not widely available and also costly. In this work, the rapid M-H measurement system with a giant magnetoresistance (GMR) sensor serving as the zero-field detector is proposed. The M-H curve is obtained by integrating the voltage in the pickup coil to determine the magnetization of the test sample under a sweeping magnetic field. The environment field component along the direction of the sweeping field is suppressed by using the output of the GMR sensor as the trigger signal to determine the offset field in the measured M-H curve. The experimental results show that the M-H curves for various kinds of soft magnetic samples, e.g. mu-metal wire, can be obtained under the interference of an applied static field. The proposed method helps improve the accuracy of the rapid M-H measurement system in the unshielded environment.